Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: I Cube Transformer  (Read 22012 times)

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #15 on: March 29, 2013, 09:43:49 AM »
here  are a few more picture of a compleat spinner pulse wire  fully wound  on an ICUBE core


icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #16 on: March 30, 2013, 02:00:52 AM »
here is the ICUBE  spinner  both halfs wound 1 wire oppisite dirrections  there is 20 laps of 4 turn/ lap for a total of 80 turns each on both cores  clockwise and counter clockwise  this winding configuration MAKES A SUPER STRONG MAGNETIC FEILD ... 

so strong infact .. that i broke 5 legs off this core i have since then had to repair the core with epoxy  just a word of caution do not let the 2 halfs crash togather i only applyed 12 vdc to the spinner and they slammed  into each other  the pull force on the one i had powered was so strong it yanked it out my hand ...  KOOL!

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #17 on: March 30, 2013, 07:36:04 PM »
so in the next picture you see that i made a bobbin of cardboard to wind a secondary on...
so i wound the secondary 22 gage magnet wire 150 turns in 5 layers starting at 40 turns ..   it wound well in my next pic you see the bobbin set in place  all i did to wind the coil was found a solid square shape the bobbin fit on perfectlly  i then hand wound it 

in the last picture you see the 150 turn secondary in place on the ICUBE core

i will be placeing 4 secondaries on the leggs aswell

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #18 on: April 02, 2013, 06:32:13 AM »
so now i will place the 4 secondaries on the ICUBE spinner thease 4 secondaries will be wound on bobbins .. the bobbins i have found are from a dollar store  they were used to hold coloured craft wire they did not cost much ...

i will wind 30 gage magnet wire on them in a usual AC winding configuration ..  typically left to right layer on layer ... incase you didn't  know ....  lol

so here is a picture of the bobbins i will use and they will be wound for high voltage high freq ...the spinner is designed for  low voltage supply ....

ARX11


icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #19 on: April 02, 2013, 07:11:15 AM »
so thats great then we have a blank bobbin and i dont feel like hand winding it .... yawn ...

so here is what i have done here is a simple cheep bobbin winder ..  i payed like $4.95  for it  i just added electrical tape to center the bobbin .. here are 3 pics showing the winder it goes in a cordless drill...

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #20 on: April 02, 2013, 09:48:04 AM »
4 secondaries 30 gage around 1000 turns per bobbin

i have lots of room on the legs yet !
picture #2 all bobbins abord ...... 
all back togather
ARX11


icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #21 on: April 02, 2013, 11:37:55 PM »
I have a few more I CUBE SPINNER configurations yet ...
the next one I will talk about is the ICUBE SPINNER ACCELERATOR this device is almost the same as the one b4 it  but both spinners are wound SAME DIRRECTION  and only 1 spinner is powered to start with .. as the output of the first spinner builds up in a cap the second spinner / accelerator is engaged  .. and it adds to the fast spinning magnetics  running same polarity and direction  as primary  spinner and the  accelerator  is powered from the fly back of the first spinner only  ..

I will display pictures  for this as well but I will first finish the last spinner  lol
I have a few more things  for it yet ....

ARX11
 

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #22 on: April 03, 2013, 04:46:56 PM »
I have been researching energy for some time ....  I do have a large inventory of devices I have invented and in the toys I have made resides  this coil I was able to make a device run on its self with gain .I have done this a few years back ... so I have chosen to wind an ALI coil on an I CORE...  and see what will be the result...

here is a video of a ALI COIL
http://www.youtube.com/watch?v=s95te2vP21w
in this video I make a polarized ALI coil .. on the fly back I wound a non polarized coil 

so I made one on a fly back core ... :)
here ya go 

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #23 on: April 03, 2013, 05:58:04 PM »
so here is a good source of power to drive my ICUBE CORE TRANSFORMERS...

ever wonder why  I don't  use the bridge and an external EARTH GROUND .. AND INJECT  FREE ENERGY INTO THE SYSTEM .... :)

I love this video ..

perhaps I may just do that ... lol

ARX11

this coil and configuration could power any of the I CUBES I have showen ... :)

http://www.youtube.com/watch?v=YRGKgpMcAPA

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #24 on: April 03, 2013, 08:42:43 PM »
so finishing up the  I CUBE SPINNER ..

it needs 2 trigger wires yet and some higher amperage lower voltage few turn secondaries  then the winding is compleate it will have high voltage out x4 and lower voltage out center core .. and high current low turn out x8

so there is lots of outputs ..
here is the coil with a trigger wire wound on top of the spinner winding

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #25 on: April 04, 2013, 05:40:42 AM »
the I CUBE SPINNER is now complete
in the first picture  you see I wound 8 3 turn coils 14 gage magnet wire ..
the 2 triggers are wound same direction as spinner 2 laps 4 turns total 8 turns per trigger  same gage as spinner 22 gage

and that's it for this cube ..

13 OUTPUTS .... 2 INPUTS ...:)

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #26 on: April 04, 2013, 09:34:27 AM »
The I CUBE  stands for the intelligent cube transformer ....

now my basic shown public  I CUBES are not so intelligent lol ... as there just windings on a core .....
but theres ooo so much more to it yet  8)

but I will not be releasing this part of my device for some time ...
as  I have little desire to share more of my work  regarding this matter
I have shared the transformer design ...  and many winding configurations and I do have a lot more ways to make this cube core operate ...  I will be shareing more ways to configure the core windings  in the near future ...

my complete design  is more for advanced users .. like robotics  and other tecks ... its more of a highly controllable device ... like say I wanted 60 hz output ..and also  400 hz and and 4k hz out and maybe 4 MHz  my device is designed to change with ease the desired voltage amprage and frequency of the cube core ... and its kinda like  a SMART FONE OR A SMART TV OR A SMART TRANSFORMER ..

 8)
no more will be said regarding this right now ... as I would like to market the full design ..

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #27 on: April 08, 2013, 09:18:19 AM »
the I CUBE  as I have shown
can be CONFIGURED MANY WAYS AND I DO NOT LIMIT MYSELF TO ANY NUMBER OF CONFIGURATIONS UP ON THIS CORE . this core I have shown is my method of combining multi cores as a single THIS IS MY MOST BASIC CONFIGURATIONS OF FLYBACK CORES ...

the basic I CUBE !

next I will display my I CUBE X2  ITS 8 CORES

it operates agin in many configurations and I do not limit myself to just the shown configurations ..

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #28 on: April 08, 2013, 09:24:46 AM »
building THE I CUBE X2  core assembly ...

im selling built cores for $275 cdn by order only ..

I will explain the entire core so if you have the resources to build it by all means built it .. but credit the inventor ....

I will be displaying build pictures ..
required materials
epoxy
8 TV's all the same
and a lot of time ....

pictures to follow soon

ARX11

icorex11

  • Newbie
  • *
  • Posts: 29
Re: I Cube Transformer
« Reply #29 on: April 08, 2013, 09:35:40 AM »
ok here is half an  ICUBE X2

there will be 2 of these stacked as 1 

this is the I CUBE X2

ARX11