Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: A Kapanadze generator replication - Febuary 2013  (Read 290921 times)

zcsaba77

  • Full Member
  • ***
  • Posts: 245
Re: A Kapanadze generator replication - Febuary 2013
« Reply #75 on: March 06, 2013, 09:39:43 PM »
Hi Grumage and Zcsaba ; yes as gyulasun said ZVS schematic is on the net if you google. This driver is very wild and deadly too cause it can pump alot of ma in a 1inch or more arc so if you're planning to build this be aware of it.
Today I remembered the setup I did last time as shown but changed cap to a 2500v smaller cap.
Another thing how can one do multi quote on this forum?
Still nothing OU yet cause I lit a 25w bulb I think same as input now.

Hi Guruji

Driver (ZVS+FB?) itself is deadly or whole stuff deadly?
I dont know how others does multi quotes, I open multi page and I copy from one to second. I hope this help for you  ;)

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: A Kapanadze generator replication - Febuary 2013
« Reply #76 on: March 06, 2013, 10:32:03 PM »

...  this video is on ZVS: http://www.youtube.com/watch?v=0ONq3DxXE2w  ...

This video looks like circuit diagram about induction heater ::) , if am I correct.
This type circuit is ZVS?

It is an oscillator built around a line output transformer and the high voltage appears across the right hand side coil where a 13 kOhm resistor is shown as the load in the simulator.  The tank circuit is formed by the 5 + 5 turns of windings with the capacitor between the two drain pins of the FETs.
Probably the circuit could be used as an induction heater (if some changes are made in it to that direction with some additions too) but the original goal was probably to design a high efficiency high voltage energy source capable of giving strong output currents.
Yes this is a ZVS type circuit.  An off the shelf line output transformer always includes a (rectified) HV output, see the bell shaped insulation cap here http://wiki.4hv.org/index.php/File:DCFBT.JPG   The circuit shown in the video simulation is here too:
http://wiki.4hv.org/index.php/Flyback_transformer 

EDIT: this is a correct link to the picture of the line output transformer:  http://wiki.4hv.org/images/8/87/DCFBT.JPG

tika

  • Newbie
  • *
  • Posts: 37
    • French FB construction page
Re: A Kapanadze generator replication - Febuary 2013
« Reply #77 on: March 06, 2013, 10:42:19 PM »
In one of the posts King said to crush ferrites and do a form you need; did you do this? Do you use special type of glue?

I think liquid epoxy should be fine.

m:o)

guruji

  • Sr. Member
  • ****
  • Posts: 470
    • http://andyborg.tripod.com
Re: A Kapanadze generator replication - Febuary 2013
« Reply #78 on: March 06, 2013, 10:43:14 PM »
Hi Guruji

Driver (ZVS+FB?) itself is deadly or whole stuff deadly?
I dont know how others does multi quotes, I open multi page and I copy from one to second. I hope this help for you  ;)




Yes Zcsaba you're right whole stuff I think is deadly cause it gives greater current.
Posting thie ZVS schematic.
Ok thanks regarding multi quote.

zcsaba77

  • Full Member
  • ***
  • Posts: 245
Re: A Kapanadze generator replication - Febuary 2013
« Reply #79 on: March 06, 2013, 11:26:10 PM »
EDIT: this is a correct link to the picture of the line output transformer:  http://wiki.4hv.org/images/8/87/DCFBT.JPG

.... still unopenable this pic or site. Can you post/attach here.

totoalas

  • Hero Member
  • *****
  • Posts: 656
Re: A Kapanadze generator replication - Febuary 2013
« Reply #80 on: March 06, 2013, 11:41:37 PM »
http://www.overunity.com/12487/simple-to-build-isolation-transformer-that-consumes-less-power-than-it-gives-out/msg333386/#msg333386
(http://www.energyscienceforum.com/images/misc/quote_icon.png) Originally Posted by John_Bedini(http://www.energyscienceforum.com/images/buttons/viewpost-right.png)T1000,
That is correct it is a double sided ax. I have done that in some of the units, Peter and I have a circuit that just did that of witch you speak, the results were mixed. Although I will do it again. I have see some different things when doing that, I'm not saying they are good or bad, just mixed. In 2000 Peter and I did almost the same circuit your showing in the post ,and I agree with what your saying. I must start somewhere here so I chose simple first. Please post a youtube showing your circuit working as I do not follow overunity.com. I'm sure everybody would love to see that.
Ok, here is my(and my friend's) story first:
Massive OU Claimed in Freaky Pre-Halloween Video

Here is same story In patents:
http://www.nuenergy.org/pdf/GB763062.pdf
Michel Meyer -- isotope transmutation electric generator

Here is the output oscillogram:
(http://www.energyscienceforum.com/attachments/sg-radiant-oscillator/583d1346442716t-sg-radiant-oscillator-pirmine-iskociojimas-pjuklas-50-hercu.jpg)

The basic principle is based two signals comming into two primaries of transformer and making magnetic domains of the core itself to resonate on 3D space rotation... It is way down to atom level (http://www.energyscienceforum.com/images/smilies/smile.png) The one thing here is, the transmutation nuclear process starts up and while atoms are transforming from higher isotope to lower, the huge amount of magnetic field and electricity goes out of it. In addition there is neutron decay side effect. I just did find out and only recently about possibility to avoid this and stay way below of atom destruction level while still having strong magnetic oscillations... The way to it was probably found by one Russian scientist recently(still needs verification): 1) the first signal - the highest driving current and lowest possible voltage is from serial LC resonance in inductor
2)the second signal - the radiant spikes come with much higher frequency joined together into single wire just those are on 180 degrees to current phase.
Here is principal schematics for basic understanding:
(http://www.energyscienceforum.com/attachments/sg-radiant-oscillator/584d1346442948t-sg-radiant-oscillator-mix-bemf-reactive-current.jpg)

(http://www.energyscienceforum.com/images/misc/quote_icon.png) Originally Posted by LesK(http://www.energyscienceforum.com/images/buttons/viewpost-right.png)Running magnetic fields against each other is something I had never considered as a part of the SSG before.
LesThis whole area was re-discovered and forgotten more than 80 years ago...
The one of pioners in this area was E. Leedskalnin with his magnetic generator:
http://www.hyiq.org/Library/Download...ic-Current.pdf
Edward Leedskalnin's Perpetual Motion Holder
http://www.leedskalnin.com/Generator.jpg
LEEDSKALNIN.COM: MAGNETIC CURRENT RESEARCH
Above quote from t 1000
I think this was also achieved by Peter Linderman   not on the primary but on the output    using hv diodes in source positive to the HV output of ignition coil

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: A Kapanadze generator replication - Febuary 2013
« Reply #81 on: March 06, 2013, 11:45:58 PM »
.... still unopenable this pic or site. Can you post/attach here.

Here it is.


TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: A Kapanadze generator replication - Febuary 2013
« Reply #82 on: March 07, 2013, 12:41:07 AM »
ZVS oscillator driving a DC television flyback transformer like that one above:

http://www.youtube.com/watch?v=4XRwlNCF1PU

The circuit is the standard ZVS circuit that has been posted several times above, using IRFP260 mosfets.

A very similar circuit is indeed used in induction furnaces, but operating at a lower frequency.

Another simple variant of this circuit, at higher frequencies, makes a wireless power transmission system, as I've shown in a bunch of other videos.

The ZVS oscillator itself in this system is driven by 24-32 volts and is only supplying the 5+5 turn primary with a few tens of volts p-p and isn't dangerous itself. But the output of the flyback transformer is 20-30 kV and will kill you quickly, set stuff on fire, etc.

zcsaba77

  • Full Member
  • ***
  • Posts: 245
Re: A Kapanadze generator replication - Febuary 2013
« Reply #83 on: March 07, 2013, 09:56:47 AM »
Hi for All

On the bottom on this link, is Tesla draw:
http://freeenergylt.narod2.ru/lithuania_experiment/
how works together 12Hz and high frequency? how we can gain energy? maybe spark gap is adjusted to 12 Hz  ???

totoalas

  • Hero Member
  • *****
  • Posts: 656
Re: A Kapanadze generator replication - Febuary 2013
« Reply #84 on: March 07, 2013, 11:51:45 AM »
http://youtu.be/41bXN_SJuU4
Energy Amplification - Just Simplify and Amplify 
 
totoalas

tika

  • Newbie
  • *
  • Posts: 37
    • French FB construction page
Re: A Kapanadze generator replication - Febuary 2013
« Reply #85 on: March 07, 2013, 12:36:04 PM »
Hi for All

On the bottom on this link, is Tesla draw:
http://freeenergylt.narod2.ru/lithuania_experiment/
how works together 12Hz and high frequency? how we can gain energy? maybe spark gap is adjusted to 12 Hz  ???

That is different, the 12Hz is earth resonant frequency for scalar waves.  Natural frequency for EM Waves is around 8Hz, but scalar waves apparently travel at 1.5 times the speed of light.

m:o)

zcsaba77

  • Full Member
  • ***
  • Posts: 245
Re: A Kapanadze generator replication - Febuary 2013
« Reply #86 on: March 07, 2013, 02:05:05 PM »
That is different, the 12Hz is earth resonant frequency for scalar waves.  Natural frequency for EM Waves is around 8Hz, but scalar waves apparently travel at 1.5 times the speed of light.

m:o)

Earth resonance is 12 Hz in scalar wave range? What is EM? 1 Hz (in Scalar Wave)  is 1.5x speed of light?

tika

  • Newbie
  • *
  • Posts: 37
    • French FB construction page
Re: A Kapanadze generator replication - Febuary 2013
« Reply #87 on: March 07, 2013, 07:23:07 PM »
Earth resonance is 12 Hz in scalar wave range? What is EM? 1 Hz (in Scalar Wave)  is 1.5x speed of light?

EM = Electromagnetic.  Our planet's natural electromagnetic resonance, also called Schumann resonance is 7.83Hz.   Tesla had measured scalar wave resonance at around 12Hz.  Which implies that scalar waves travel (12 / 8 =) 1.5 times faster than EM waves, which travel at the speed of light.

Scalar waves are of a different nature than EM waves. They were zeroed out of Maxwell's equations (by Hertz) to make the maths easier.  Big mistake.

http://www.k-meyl.de/go/Primaerliteratur/Scalar-Waves.pdf

m:o)

guruji

  • Sr. Member
  • ****
  • Posts: 470
    • http://andyborg.tripod.com
Re: A Kapanadze generator replication - Febuary 2013
« Reply #88 on: March 07, 2013, 08:04:51 PM »
Hi Totoalas interesting schematic regards.
See my Kapagen ok I only Lit a 40w 240v bulb but will experiment more to increase wattage:
http://youtu.be/ESjVbFTV-5s

totoalas

  • Hero Member
  • *****
  • Posts: 656
Re: A Kapanadze generator replication - Febuary 2013
« Reply #89 on: March 07, 2013, 10:21:05 PM »
Hi Totoalas interesting schematic regards.
See my Kapagen ok I only Lit a 40w 240v bulb but will experiment more to increase wattage:
http://youtu.be/ESjVbFTV-5s
thanks guruji
the extra plasma can be used in a bitt transformer   but I prefer your kapanadze  to power up my house   lol