Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE  (Read 2334848 times)

Schiko

  • Newbie
  • *
  • Posts: 46
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #465 on: December 31, 2013, 04:00:54 PM »
@forest
Now this is a job for hanon!  ::)  ;D


@Marsing
You have to treat the signal, because basically it is a common audio signal.
If you understand a bit of electronics is easy!

Regards

Doug1

  • Hero Member
  • *****
  • Posts: 763
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #466 on: January 01, 2014, 04:44:06 PM »
 Im not smarter then anyone ells, maybe older.

RMatt

  • Newbie
  • *
  • Posts: 35
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #467 on: January 01, 2014, 05:15:22 PM »
Well Doug,

I'm 50, but sometimes it feels like I'm about 90 ;D

Bob

Doug1

  • Hero Member
  • *****
  • Posts: 763
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #468 on: January 01, 2014, 07:15:09 PM »
 I wont insist on being called sir although i could lol. Whipper snapper.
 Im in the middle of enjoying an epiphany.  I will probably  forget what is is shortly.

RMatt

  • Newbie
  • *
  • Posts: 35
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #469 on: January 01, 2014, 07:54:01 PM »
Yes Sir  ;D, same here  ;D

bajac

  • Sr. Member
  • ****
  • Posts: 285
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #470 on: January 02, 2014, 02:44:36 AM »
Happy new year to all of you! I hope your projects will materialized this year.


I wanted to share with you my progress. As I stated before, I have to rebuild the "Energy Tower" because of the extremely low number of turns of the coils. I did not want to wind the coils manually so I purchased an old coil winding machine. I just finished winding the first section of the device. It was kind of fun using the winder, and in my first trial I was able to make them in just four hours. Here are some pictures of the transformer's section:

http://imageshack.us/photo/my-images/716/w5yl.jpg/


Primary:
750 Turns #16 AWG - Taps: 200, 400, and 600


Secondary:
300 Turns #12 AWG

Also note that I replaced the metal screws with ones built with Nylon.

I will use #14 AWG for the other secondaries. It is somewhat difficult to use #12 AWG wire for such a small iron core.


I am planning on running some experiments within the following two weeks. I will keep you posted.


Bajac
« Last Edit: January 02, 2014, 01:39:17 PM by bajac »

Schiko

  • Newbie
  • *
  • Posts: 46
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #471 on: January 03, 2014, 12:00:23 AM »
@bajac

I am anxious to see the device working!  :o

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #472 on: January 03, 2014, 01:35:20 AM »
Bajac: In theory the Figuera device should work. The big question is of course is it ou.
Good luck with your replication. Good science is always worth learning about.
Please post your results.
All the best.

ALVARO_CS

  • Full Member
  • ***
  • Posts: 178
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #473 on: January 03, 2014, 09:38:44 AM »
Hi Bajac
Glad to see youre still on it !
may u show us what kind of commutator are u using ?, I made one with two comms. from two identical car window DC motors, 8 segments,two brushes each.(4 alternating paired segments with 100 ohms resistor)
I´ll try to input a square pulse over 0, Not smooth, but I think of higher freq.
May post a pic. if someone interested.
Thanks for posting.

a.king21
after revising my posts, I think I owe to apologize for an unfortunate comment I did about your comparison of Tesla (rotating field) and its similarity with Figuera´s patents. Sorry for that. I really appreciate all input of yours, as I learn from everyone here.

kind regards
Alvaro

bajac

  • Sr. Member
  • ****
  • Posts: 285
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #474 on: January 03, 2014, 09:29:46 PM »
First, I will use a step drive to generate the two 90 degree phase shifted voltages. I already started writing the code for an Arduino's controller. As a back up, I also have the electronic switching device with the seven resistors as intended in the Figuera's patent.


However, the resistor method is the worse approach for generating the two primary voltages. I am sure that Mr. Figuera use it because he did not have many choices and because of its simplicity. Getting the two phase shifted primary voltages from a small motor-generator configuration had been the only efficient method in 1908.


You should keep in mind the following design criteria when using the voltage division resistor method:


1) Recall that the input voltages have AC and DC components.
2) The resistors value must be chosen to match the impedance of the primary coils to keep the ratio of the AC-to-DC voltage components to a maximum.
3) Practically, how does one know that the resistors' values are just right? The best way is to use an oscilloscope to check the voltage waveform. If the resistor value is too high, the voltage waveform will show small increase and a sudden large peaks. If the resistor value is too low, the minimum voltage value will be high making the AC amplitude (component) small.


It is somewhat difficult to apply mathematics to calculate the value of the resistors because of the large amount of harmonics produced when switching on/off each of the seven resistors.


The Figuera's devices should use step-triangular or half-sine voltage waveform. Square wave should not be applied to this devices. The applied voltage shall increase and decrease gradually. Square and rectangular voltages will just increase and decrease instantaneous.


That is the reason why Figuera went though all the trouble for using the resistors to generate the triangular voltages.


Bajac


a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #475 on: January 04, 2014, 12:42:12 AM »
It's just dawned on me why this device will work ou.
Figuera is mixing DC with AC on the collapse of the magnetic field.
This is a known OU phenomenon and was used by Carlos Benitez in his patents!
So for this device to work you need to have pulsed DC (or even ordinary DC)  mixed with radiant energy generated AC.
Good luck. I am really interested now.

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #476 on: January 04, 2014, 01:03:46 AM »
Bajac: In theory the Figuera device should work. The big question is of course is it ou.
Good luck with your replication. Good science is always worth learning about.
Please post your results.
All the best.

In theory, theory and practice should be the same. In practice.... they are often different.


bajac

  • Sr. Member
  • ****
  • Posts: 285
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #477 on: January 04, 2014, 01:48:58 AM »
King,


It has nothing to do with radiant energy/electricity. I already explained in the published article how overunity can be achieved by fooling the effects of the Lenz's law. However, the paper does not explain where the extra energy is coming from. But, do I care? Not at this stage.


I highly recommend you to read the article.


Whatever we are doing here has enormous implications. I am pretty sure that the physical model that scientists have put together to explain the laws of nature and the universe is wrong because they do not take into account these overunity phenomena already proved by Mr. Tesla and Mr. Figuera.


Bajac

Doug1

  • Hero Member
  • *****
  • Posts: 763
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #478 on: January 05, 2014, 05:00:06 PM »
Bajac
    There is no extra power needed. Power is a measure of a reaction like work done results in what ever was the objective. The extra power is not an extra just a better use of the power you start out with for a period of time in such a way that where the potential is lower after performing some work it is tricked into providing a reaction which is large enough to satisfy the continuation of the work being done through transformations or translation depending on your use of the word. At a high enough level to prevent anymore of the source from entering the system If you assume a 1 to 1 ratio of power used compared to work done or less then you have to assume the system was designed that way for economic reasons. Everything learned for such a system that uses continuous input will not support anything different.
  Have you measured potentials yet in the load circuit? If you plan to use the load as a source after the start up you will have to be very intimate with every inch of the load circuit. Treating it as a group of magnetic events per cycle. In order for the device to have a self acting field strong enough to prevent any incoming source current you'll need two equal magnetic fields where you would normally think there is one. The second one is not supplied with an equal amount of current as the first but still it has be magnetically just as strong as the one tied to the source for it to induce into the inducer enough field strength to translate back to the load. The load becomes the source when the reaction can be magnified into a larger event with no more then is left at the end of the event in terms of current or potential.
 When it is right it will work anywhere anytime on everything. Every living thing that ever was or will ever be is your model.

shadow119g

  • Jr. Member
  • **
  • Posts: 62
Re: Re-Inventing The Wheel-Part1-Clemente_Figuera-THE INFINITE ENERGY MACHINE
« Reply #479 on: January 09, 2014, 06:17:16 PM »
Well I spent all morning getting pictures on line!
I am building the "OLD SCHOOL" version of this device. The pictures show my "resistor." This is an
electric heater that I bought at the biggest store chain in the us. The price was under $20.00. If
needed I can put the core back into its original plastic housing and use the fan to cool the heating element.
I made a drawing of a sign wave superimposed on a graph of squares on my computer. Across the top is
time moving from right to left. Down the left side are ohms from zero downward to around forty-two on the left.
As you can see the values on the paper indicate the actual values I obtained by using my ohm meter.
I am currently, after getting the pictures online, making a new attempt to only have eight spaces for time
across the top. I believe this is what the Mr. Figeura had in mind.

Swamp