Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719930 times)


justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22831 on: December 17, 2020, 01:32:38 AM »
   Justawatt:   The guy who bought Ruslan's fake non working device for $5000, sent you ten of Ruslan's videos???
   You mean the same 10 videos that Ruslan has posted previously? Including the video showing the fake device with a relay?   After that, I don't really trust anything that Ruslan says, or does. Until it can be replicated...

These videos were send by a new group.
I have shared a photo with circuit diagram few post before.
They are linked with Alexey.
I have got the waveforms which they send me.which I posted .
They said next part is the Tesla coil.
I am waiting for their adivce when I got some more info I will share.
I have shared the fish wave working device of theirs too.
Fish wave is for 100 to 300 watts device which andrien also used.

You only need primary and resonance coil
For primary increase the no of turns it's not 8+8 turns like akula and Ruslan showed in their diagram
If you are using 8+8 turns use a dc to dc converter to increase the voltage till
You get the wave form mentioned. Or increase the no turns on resonance coil.
Instead of 3-4 turns make it 20-25 turns.
Best is dc to dc converter.

Nickz 5000 dollars thing is not scam. He has send him akula 250 device .using
Lm393 and 4017 ic thing look closely his video.
He didn't send him 1 kw or above device.

He just wanted to discredit Ruslan and his device that's all.
Info comes from Alexey group.
Their names are George,victor,belkired
Alexey has far better circuit than Ruslan or akula itseems

I have shared the videos in the Skype group.
Rest is not know yet

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22832 on: December 17, 2020, 02:19:37 AM »
These videos were send by a new group.
I have shared a photo with circuit diagram few post before.
They are linked with Alexey.
I have got the waveforms which they send me.which I posted .
They said next part is the Tesla coil.
I am waiting for their adivce when I got some more info I will share.
I have shared the fish wave working device of theirs too.
Fish wave is for 100 to 300 watts device which andrien also used.

You only need primary and resonance coil
For primary increase the no of turns it's not 8+8 turns like akula and Ruslan showed in their diagram
If you are using 8+8 turns use a dc to dc converter to increase the voltage till
You get the wave form mentioned. Or increase the no turns on resonance coil.
Instead of 3-4 turns make it 20-25 turns.
Best is dc to dc converter.

Nickz 5000 dollars thing is not scam. He has send him akula 250 device .using
Lm393 and 4017 ic thing look closely his video.
He didn't send him 1 kw or above device.

He just wanted to discredit Ruslan and his device that's all.
Info comes from Alexey group.
Their names are George,victor,belkired
Alexey has far better circuit than Ruslan or akula itseems

I have shared the videos in the Skype group.
Rest is not know yet
So is your equivalent yoke or torrid core got 8 +8 turns on the primary and 20 to 25 turns on the secondary nothing else ?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22833 on: December 17, 2020, 10:13:04 AM »
 
   What I think is, that my induction circuits, and the Kacher circuit are doing their thing perfectly, but, I don't see a proper sync between them. Which is the hardest part to get to see, especially for most any one that has taken the time to go this far.

Thanks for the answer Nick.
Some people already have tuned their katcers but still no results. This doesn't mean that you don't need a proper sync at this point. It means that people are still doing things without understanding. Just plain circuit copies. Without HF modulation you can't go that far.
In addition, Ruslan's attitude has disappointed me also in the past. That doesn't mean that his technique is invalid.

Regards 


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22834 on: December 17, 2020, 10:19:37 AM »
   Differential probe method?   Please explain. ;)
   NickZ
Nick,

there are expensive differential probes on the market, but most modern scopes have a math function on which you can subtract (-) 2 channel signals.
That is what i use when mentioning the differential probe methode.

As you have an analog scope there are differences, but this video shows how it still can be done:  https://www.youtube.com/watch?v=VWodjUSkYVE


Basically you use 2 scope probes without their grounding leads and subtract the signals from each other leaving the potential between them to measure, your signal.

Be aware that allthough not using the ground leads of the probes, you still have to watch out not to exceed the probe channels max. voltages.

Itsu
« Last Edit: December 17, 2020, 08:53:43 PM by itsu »

justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22835 on: December 17, 2020, 10:30:03 AM »
So is your equivalent yoke or torrid core got 8 +8 turns on the primary and 20 to 25 turns on the secondary nothing else ?

Mine device uses 20 + 20 primary , resonance 5 turns
Supply voltage 12 volt.
If you are going for 8 +8 turns use 24 volt
And I have put small paper on one side of yoke before joining. The device when started first I don't get the wave.
I have to wait for some time  ,on and off to get this waveform .
Ones I get the waveform no need for this process.
You can on and off the device it works.
So one thing I notice after some time the yoke is farm to touch. Don't know if it plays role.

And the way granade is wound 38 m and resonance 19 m.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22836 on: December 17, 2020, 10:32:32 AM »
Nick,

there are expensive differential probes on the market, but most modern scopes have a math function on which you can subtract (-) 2 channel signals.
That is what i use when mentioning the differential probe method.

As you have an analog scope there are differences, but this video shows how it still can be done:  https://www.youtube.com/watch?v=VWodjUSkYVE


Basically you use 2 scope probes without their grounding leads and subtract the signals from each other leaving the potential between them to measure, your signal.

Be aware that although not using the ground leads of the probes, you still have to watch out not to exceed the probe channels max. voltages.

Itsu

Hi Itsu
First time i see this technique! I can't wait going home and play with that!!! ;D ;D

Thanks a lot!!!
Regards


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22837 on: December 17, 2020, 02:59:25 PM »
Hi Itsu
First time i see this technique! I can't wait going home and play with that!!! ;D ;D

Thanks a lot!!!
Regards

    itsu:
    Not sure if I understand the (-) that you can subtract from. Thanks for the explanation, maybe I will try that way, as well.I do have both an analog scope as well as a newer diglent SDS 1052DL digital scope.  I don't use the older scope anymore as it has some problems now, after all its years at the beach.
   I always use just the positive probe to test the circuits when dealing with HF and HV. Seems to work ok for what I need it for, as I am not working on systems with tiny outputs. I also use the one milimeter spark = 1000v for a visual comparison on HV.
   Perhaps Jeg can tell us more about the comparison, to just using the positive probe to test for HV 1000v to 10000v.

   NickZ

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22838 on: December 17, 2020, 03:27:55 PM »
   Justawatt:   As I understand it, the device he bought from Ruslan for $5000 did NOT WORK. It has a relay that needs to be connected to a power source for the device to turn on. Otherwise, no it's not working, not self running, even at 200v, as it is a fake.
Ruslan was taken to court about it, and suppose to have lost the case. 
  This is all hear say, so...who knows what the real truth is.  But, that relay thing is enough for me to not believe what Ruslan says.
And Ruslan did say that he will not show and tell all, about the workings of his devices. So...


   NickZ

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22839 on: December 17, 2020, 05:25:54 PM »
   Justawatt:   As I understand it, the device he bought from Ruslan for $5000 did NOT WORK. It has a relay that needs to be connected to a power source for the device to turn on. Otherwise, no it's not working, not self running, even at 200v, as it is a fake.
Ruslan was taken to court about it, and suppose to have lost the case. 
  This is all hear say, so...who knows what the real truth is.  But, that relay thing is enough for me to not believe what Ruslan says.
And Ruslan did say that he will not show and tell all, about the workings of his devices. So...


   NickZ
Well last i know was he got it working, Talk to Wesley instead of doing nothing

AG
 

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22840 on: December 17, 2020, 05:33:57 PM »

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22841 on: December 17, 2020, 06:48:56 PM »
Why can't I get such a symmetrical kacher? Phasing of the windings is correct. Separately, each half works. And together there is no oscillation. I wanted to come up with a new symmetrical kacher, but failed.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
« Last Edit: December 17, 2020, 11:16:47 PM by AlienGrey »

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22843 on: December 17, 2020, 08:56:32 PM »
    itsu:
    Not sure if I understand the (-) that you can subtract from. Thanks for the explanation, maybe I will try that way, as well.I do have both an analog scope as well as a newer diglent SDS 1052DL digital scope.  I don't use the older scope anymore as it has some problems now, after all its years at the beach.
   I always use just the positive probe to test the circuits when dealing with HF and HV. Seems to work ok for what I need it for, as I am not working on systems with tiny outputs. I also use the one milimeter spark = 1000v for a visual comparison on HV.
   Perhaps Jeg can tell us more about the comparison, to just using the positive probe to test for HV 1000v to 10000v.

   NickZ
Nick,

if you want to measure the signal across the Wima capacitor without using the groundlead of a scope probe (because that groundlead will short out something), then use 2 probes across that capacitor without connecting their groundleads.

Then set up your digital scopes math function to subtract those 2 probe channels from each other.

The math trace will display the resulting subtracted signal which is the signal across the capacitor you want to measure.

See also this old Dr Stiffler video where he also use this method: https://www.youtube.com/watch?v=1y3AcIlBSX0

Be aware that you still need to check for maximum voltage the channels can handle as there could be 1000 or so Volts across the Wima cap, so you need 2 HV probes.

Itsu

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22844 on: December 18, 2020, 09:54:49 AM »
Why can't I get such a symmetrical kacher? Phasing of the windings is correct. Separately, each half works. And together there is no oscillation. I wanted to come up with a new symmetrical kacher, but failed.

Hi kolbacict
Difficult to do it if not impossible. No matter how similar your primaries look like, you will always have a different frequency of vibration between your two coils. This will make your bases to be triggered at different times. The one that will open first will consume the energy of the base coil, leaving the other with not enough energy to be triggered right.
If your purpose is to create beats, then you will have to move differently. ;) 
« Last Edit: December 18, 2020, 12:16:19 PM by Jeg »