Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715950 times)

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22335 on: July 03, 2020, 08:24:10 PM »
Conaco,

Yes! on your test TL494 try hooking up your Signal generator to the TL 494 via a cap
and posably a posative going diode to pin for and see if you can trigger it !
rather than it free running.

I just tried this my self the problem is it needs to be driven by a syc pulse witch makes it complicated or it
screws up the pulse width mechanisum.

hello everyone
I detected.
if you want to use only nano pulse, you don't need the CD4093.it is for tesla pulse only.
the POT of the 74HC00 on pin 3 and 4y5 green color controls the phase and the POT pin 11 and 9 red color, controls the width. the other 74HC00 inverts the polarity of the pulse in case you use an inverted mosfet driver. or if it is not inverted.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22336 on: July 03, 2020, 11:17:06 PM »
hello everyone
I detected.
if you want to use only nano pulse, you don't need the CD4093.it is for tesla pulse only.
the POT of the 74HC00 on pin 3 and 4y5 green color controls the phase and the POT pin 11 and 9 red color, controls the width. the other 74HC00 inverts the polarity of the pulse in case you use an inverted mosfet driver. or if it is not inverted.
Soliman, hello

Re you above info can you re post the circuit your refering to only the pin numbers and the colours you refer to dont line up with anything I have, circuit wise.

|Many thanks AG

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22337 on: July 04, 2020, 06:30:49 AM »
AG, Soliman talks about his scheme that has a different kind of catcher than ours with TL494. This is Soliman's scheme:

It is a versatile and very good scheme. In order not to have unwanted noise in the system, 8-9 chokes (line transformers) were used.

because it has a very good and flawless scheme, Soliman is the most advanced of us. It has 240V on load, I have just 167 V on load.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22338 on: July 04, 2020, 08:00:57 AM »

Soliman, can you tell us what value the capacitors in your system have?
In the picture below are C1, C2 and C5

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22339 on: July 04, 2020, 01:29:07 PM »
Have you a better resolution scan of this section it might help to see his idea ?

Regards AG

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22340 on: July 04, 2020, 03:13:46 PM »
Try this:

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22341 on: July 04, 2020, 06:57:55 PM »
Try this:
I think that one is the wrong down load its rthe Soloman one we need to see the component values
if you have it please.

AG

Also Solaman says the nano pulser works different, thing is the katcher has to do the same thing  ::) ::)  ;D ;D

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22342 on: July 04, 2020, 08:32:06 PM »
Rar , Is not working?

Soliman's catcher has several options but in reality it gives the same signal as Ruslan's with TL494.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22343 on: July 05, 2020, 03:34:23 AM »
got it now thanks

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22344 on: July 05, 2020, 05:57:25 PM »
Soliman, can you tell us what value the capacitors in your system have?
In the picture below are C1, C2 and C5
Conico,


C1 = 0.47uf
C5 = 0.47uf
C2 = 2 x 0.15uf parallel + 2 x 0.15uf serial + 4 x 0.15uf serial.
all of them in parallel.
they are three sets of capacitors in parallel and arranged.
for a total of 425nf they are all WIMA MKP10 2000Volt DC

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22345 on: July 05, 2020, 08:33:44 PM »
All connections to water pipe !?!? why ?

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22346 on: July 05, 2020, 08:46:38 PM »
The greater ground the better connection and attraction for good output.
The less ground in my experience is less power out.

In comparison with the signals sharing from the TL494 in shown diagram,
 where on my setup it is shared after the amplifier which is the 1R2110 to the kacher circuit.

Busy replacing small caps on the Pushpull driver, TL494 was limited till 27Khz.
Now will be able to have the range of till 50Khz which is necessary, maybe this was limiting me
Since very beginning.

Cheers
;)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22347 on: July 05, 2020, 09:54:24 PM »
The greater ground the better connection and attraction for good output.
The less ground in my experience is less power out.

In comparison with the signals sharing from the TL494 in shown diagram,
 where on my setup it is shared after the amplifier which is the 1R2110 to the kacher circuit.

Busy replacing small caps on the Pushpull driver, TL494 was limited till 27Khz.
Now will be able to have the range of till 50Khz which is necessary, maybe this was limiting me
Since very beginning.

Cheers
;)
Geo it's been a long time, one thing I wanted to ask you Are you still running your katcher at 1.7mhz
only that’s quite a high frequency as most of the circuits and drivers coming out now are around 300- 400 kHz?
if you go below into the 200khz the wave form tends to get distorted ( perhaps 750 ish kHz appears optimum, witch is above the 494's capability) with poor transfer from the spaced driver
coil which is just an ordinary Tesla coil, nothing special.


AG


GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22348 on: July 05, 2020, 10:30:26 PM »
Geo it's been a long time, one thing I wanted to ask you Are you still running your katcher at 1.7mhz
only that’s quite a high frequency as most of the circuits and drivers coming out now are around 300- 400 kHz?
if you go below into the 200khz the wave form tends to get distorted ( perhaps 750 ish kHz appears optimum, witch is above the 494's capability) with poor transfer from the spaced driver
coil which is just an ordinary Tesla coil, nothing special.

AG

Yes it has AG, to busy with life and other human alike experiences.
1.7mhz is one of the values depending on my tapping point ( lenght ) of the secondary Tesla I tune too.
I had good results back then around 800Khz - 1Mhz ~ range on the tesla when Pushpull circuit was driving around 16Khz-18Khz.
 All depends where the standing waves are good and the resonance to set too.
Just make sure your push-pull driver AKA TL494 chip set can drive up till 50Khz range, It is important and will be sufficient for @ 40 meters
grenade coil receiver. All  HV caps connected between yoke and grenade and grenade output are all in series for tuning...after that 
the HF HV FWBR to caps that will be charged in Parallel, this is what I am about to go thru as approach. did it once before on outside bench
but on a different approach, some variant of Ruslan back then, Video is on my channel. Don't forget the ground, it cannot operate well
without it.... Well this design then... because there is one that does not need ground and utilizes 2 antennas with double HV coils with
centertap. ;) that will be next after we finish this.

seychelles

  • Hero Member
  • *****
  • Posts: 991
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22349 on: July 06, 2020, 06:26:45 AM »
Hi R2FPL the reason for very good earth is because the whole concept of this invention is
to extract charge from an asymmetric supercapacitor. The idea behind this is to use the
STANDING WAVE THEORY to bring the charge into the grenade so that the electrical charge can be
 extracted. SWR  is a standing wave ratio. Very likely one can use a CB radio to do the same
job but at a 27 MHz resonance. but again the EARTHING has to be super good. To test for a good
earth is to connect 240v AC TO a lamp of 100 watts  IN SERIES WITH YOUR EARTHING SYSTEM
and get the best current reading. THICK COPPER WIRE AND MANY COPPER TUBES IN THE EARTH.