Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718168 times)

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22245 on: June 22, 2020, 12:36:29 AM »

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22246 on: June 22, 2020, 11:49:24 AM »
Hi Soliman and thanks for drawings, I have seen that circuit many times Geo fusion keeps quoting bits from it, if that circuit was the only way
of doing it I would make it up on a bread board, but its not, unless you know  how it works to me the 4013
at the end confuses things.

I will try and show how I have experimented to get what I find more usefull.
the transister collector goes to the pin 2 of the 4420 Mos Fet driver
feed back from the 494 to pin 1 of the hc00 needs a 1kR for gate timing shape
building this circuit is your responsability and is only intended as a guide


AG
« Last Edit: June 22, 2020, 05:08:32 PM by AlienGrey »

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22247 on: June 23, 2020, 02:28:18 PM »
Hi Soliman and thanks for drawings, I have seen that circuit many times Geo fusion keeps quoting bits from it, if that circuit was the only way
of doing it I would make it up on a bread board, but its not, unless you know  how it works to me the 4013
at the end confuses things.

I will try and show how I have experimented to get what I find more usefull.
the transister collector goes to the pin 2 of the 4420 Mos Fet driver
feed back from the 494 to pin 1 of the hc00 needs a 1kR for gate timing shape
building this circuit is your responsability and is only intended as a guide


AG

hello everyone
AG, my point of view is that the voltage of the TC4420 pin 2 and pin 7 and 8 are similar and that the output voltage of tc4420 pin 7 and 8 depends on the width of the pulse.
Who controls the pulse width? Mainly C1 or C2 of the 74HC00. if you does not have enough pulse or pulse width the output voltage of the tc4420 will be very low and the katcher will not work. I have noticed that almost all controlled katchers are similar in their circuits and operations. I have built many circuits of different versions, most of them fail, because the pulse width is not high enough to produce the minimum voltage required by the mosfet to be activated.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22248 on: June 23, 2020, 03:40:57 PM »
   Soliman:   If you look at the spec sheet for the fet that you are using, that will tell you what is the maximum voltage that the mosfet GATE can use. It is important to provide the gate of your fet with that maximum voltage, so it will provide the maximum output from the fet. Don't guess about that, just measure the voltage at the Fet's gate, and adjust it accordingly. If the fet won't turn on, the gate voltage is way too low.The higher the gate voltage, up to it's maximum point, the higher is the fet's output pulse.
   Are you using the TL494, to the 4420 fet driver, or not? As I am confused with the two different images that you've posted above.   I am still waiting for Geo, or someone else to show me what their controllable Kacher can do, which my simple Kacher can't do. As so far, I have not seen any benefit from any of the guys that have shown their controllable Kacher able to make the system self run.   itsu built a nice controllble Kacher circuit, which you can see in his video, but, it possibly could not sync properly, nor able to help in lighting the bulbs, which were very dim.
     BTW: A small TL494 controller board can be bought ready made, for 10 dollars, including shipping. Which has frequency and duty cycle controls. For those that do not want to have to build their own. You can't make one yourself any cheaper, if you tried.   I see no advantage of providing the Kacher circuit input source of 130v, just to have to turn down the duty cycle.
   Since you mentioned that your Kacher is working properly now, please show it doing so. And just what it can do at the output bulbs, when connected up to the grenade/yoke circuits.
   You'll need at least 300w loads, so as not to get fooled by the additional voltage coming from the Kacher, if just using low output loads. As it will show an increase in bulb brightness, at low wattage loads, but not at the required higher loads of several hundred watts. Remember I have shown my Kacher partially lighting a 100w bulb, just by itself. And even partially lighting a 250w bulb, by itself. Will your Kacher do that?

maxolous

  • Jr. Member
  • **
  • Posts: 93
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22249 on: June 23, 2020, 04:09:31 PM »
Hello all.
Well done for the good work .
I am posting for the first time here I suppose and I am interested in this replication. I have built my inverter based on the schematic I saw here. I need to learn more from you guys

I have attached pic of my built inverter.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22250 on: June 23, 2020, 05:07:29 PM »
   conico and soliman:   Do either of you guys understand Russian? 
   Here is the controllable Kacher circuit made by Stalker. I trust him over what Akula or Ruslan have shown, as they said that they would not disclose ALL. So, Stalker's circuits (below) were built and tested by itsu, and shown to work properly. The circuit provides for a multi pulse kacher, not just one firing at a time, but multiple packets firing each cycle.
   I have most all the needed parts to build the above three mosfet kacher circuit, but need some inspiration, or motivation to continue.   NickZ

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22251 on: June 23, 2020, 05:25:32 PM »
   Here's one of Geo's videos, showing a few tests that you may want to try yourselves, which results can be seen, even without needing the input to output measurements. However, the real test is once the feed back circuit is connected up to the input source. As that feed back loop and PS, will consume a lot of the output from the device, and change the previous tuning setting used, as well.   NickZ   
   https://youtu.be/1weV296sjHU


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22252 on: June 23, 2020, 06:22:07 PM »
hello everyone
AG, my point of view is that the voltage of the TC4420 pin 2 and pin 7 and 8 are similar and that the output voltage of tc4420 pin 7 and 8 depends on the width of the pulse.
Who controls the pulse width? Mainly C1 or C2 of the 74HC00. if you does not have enough pulse or pulse width the output voltage of the tc4420 will be very low and the katcher will not work. I have noticed that almost all controlled katchers are similar in their circuits and operations. I have built many circuits of different versions, most of them fail, because the pulse width is not high enough to produce the minimum voltage required by the Mos Fet to be activated.
No it does not work like that the 4422 to get a 1 out both inputs must be 1 if any are low you get a 0 none of this the catcher, oh it's not jno2w business.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22253 on: June 23, 2020, 10:25:43 PM »

I do not speak Russian, I learned a few words on this forum.

today I finished a controllable katcher, I haven't tested it yet.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22254 on: June 24, 2020, 01:08:32 PM »
   conico and soliman:   Do either of you guys understand Russian? 
   Here is the controllable Kacher circuit made by Stalker. I trust him over what Akula or Ruslan have shown, as they said that they would not disclose ALL. So, Stalker's circuits (below) were built and tested by itsu, and shown to work properly. The circuit provides for a multi pulse kacher, not just one firing at a time, but multiple packets firing each cycle.
   I have most all the needed parts to build the above three mosfet kacher circuit, but need some inspiration, or motivation to continue.   NickZ
Do you like building high power TX circuits ? I don't see a mic on the desk.  ;D ;D

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22255 on: June 24, 2020, 02:53:12 PM »
   AlienGrey:
   Do you like making dumb comments everywhere you go?
   We do have a rants room now, AG. Custom made for your distracting comments.
   Stay with the discussions at hand, on this and on the other threads and forums. please.   Do you need to be reminded, daily?  Looks like it. Short memory issue?

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22256 on: June 24, 2020, 04:02:44 PM »
Hi  :) yes great minds think alike  ;D Iwas only thinking the same about the repetaive clip art.  ;D ;D
any way point taken  :o

If you go here you will find some better quality PDF's but i'm not saying one way or the other if it works or not.

Mr stalker data base  https://yadi.sk/d/8rY1WiX6vZSnw
 
AG

Tynoo

  • Newbie
  • *
  • Posts: 15
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22257 on: June 24, 2020, 04:19:18 PM »
Hi Nick

I have this circuit built,but something is not correct with the diagrams shown!!
If you notice the photo features,the one with the oscilloscope,shows 7 integrated circuits.
In the diagram shows 6  !!! ??
I think by the pinout that is another 494.!

Greetings  (I am an admirer of your work)

Tynoo

  • Newbie
  • *
  • Posts: 15
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22258 on: June 24, 2020, 04:21:22 PM »
Analyze carefully...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22259 on: June 24, 2020, 04:30:03 PM »
Hi Nick

I have this circuit built,but something is not correct with the diagrams shown!!
If you notice the photo features,the one with the oscilloscope,shows 7 integrated circuits.
In the diagram shows 6  !!! ??
I think by the pinout that is another 494.!

Greetings  (I am an admirer of your work)

   Tynoo: No, there's only one TL494. It's best if you view the Stalker video about that particular Kacher circuit.
The single 494 is used for both the Kacher and the induction circuits.
   There is also another way of building this kacher circuit, which itsu did build up, and made a video of. It does not have the three mosfets, nor does it have multiple firings at each pulse. But, it is a simpler version of this same device. Which did work for him. The multiple firing version did not provide for the needed results, for him.
   You'll notice that the Kacher's output finally goes through a 5200 transistor, and not a mosfet. Why, because the transistor can switch at a higher frequency, like in the MHz range, not just the on KHz range, which is all that is needed for the induction circuits.  I'm not sure what the 7th component is. I assume that it has something to do with the cap and coil filters that shown on the Kacher's input from the TL494 board. Maybe not really needed?   Perhaps you'd like to show your circuit working, or not working, as there are some knowledgeable people here, that can help, if needed.
  Glad to hear that you like my work. Thanks. 
   NickZ