In my opinion the video is little more than click bait because it has no context. As well it is well known that all these high frequency circuits interact with the ground plane. I could build a $3 joule thief and show that same kind of nonsense all day long.

The only variable that matters here is efficiency and COP or the relationship between the input and output. This is why I like input/output capacitors so we can easily track and measure the COP.

I connect opto-isolators to the input/output caps then track the voltage with a $10 dollar Arduino Uno. We now have a $15 power analyzer which can calculate and track the COP in real time. I also connected a red and green LED to two output pins to show the direction of the COP. Green means the COP is rising as I make adjustments to the circuit and red means a falling COP.

Here I simply measure the voltages on the caps and check the time using millis, store the values, measure the voltages and time again then calculate the difference between each of the two voltages and time values dV/dt. Eureka we now have a measure of the rate of change of the capacitor voltages indicating the COP and its direction.

Do you see how simple this is?. This is what happens when we start applying logic and reason to our experiments. The first step is determining what is happening and why then everything else proceeds from there.

Regards

     Well, the thing is, that when you connect the scope to the output side, you just grounded out the HV pulses to ground. Therefore the measurements will be off. You'll see that for yourself, if you ever decide to build one of these contraptions.So, please show how easy and simple that is in real life. The only measurements that I need, is to see the device self run.

This is on Wesleys thread, have you read it no of course you havent is was in Russian. (Lucifer ain't my lord) 

Any cockups in the translation sorry   

Wireless Energy Transfer / Re: Wesley's Kapanadze and other FE discussion forum


From Mr Delmorto.

Hi Wesley and others!
I study the oscillatory circuit in resonance and the removal of reactive energy from it with the help of short and powerful pulses.
Remember SR193 - “Create a low-cost electromagnetic field, and then just move it.”
Because his device is like a battery, and processing by the built-in computer
is not at all linked to energy production, it is too complicated!
I am sure that in the installation of free energy,
Kapanadze uses a swayed oscillating circuit as the basis for the accumulation of the electromagnetic field in the coil.
This field is affected by a short but powerful electromagnetic pulse, shifting the
field into the pickup coil.
As an example,  here is a diagram,
I'm not sure what it is, but it seems like !


Kapanadze in the video said- "this is the classic Tesla scheme, only no one could make it work!"

Watch the video with the can, all the wires that go to the can are low current, only the wires on the reel itself are thick! So the current is formed in this place. And what can heat the wires - the oscillatory circuit in resonance! But no one could remove energy from such a circuit (again we recall the words of Kapanadze)
Kapanadze was able to squeeze out energy from the circuit! This is his secret.



The principle is very simple - there is an oscillatory circuit, serial or parallel, which accumulates an electromagnetic field in itself. Everyone knows that a huge reactive current is walking there, but you cannot extract it - the resonance is collapsing.
But I think that using an inductor and a capacitor charged to a high voltage (Tesla's circuit), this field can be shifted towards the pickup coil, creating an EMF in it!
You know, I’ve been searching for a long time, but this option came to my mind just recently, for the new year, I will test this theory myself and suggest that everyone who is interested in doing this too!


Wesley, make an oscillating circuit, measure what current it walks in resonance, both the capacitor and wires are heated.
Nobody could use this energy without destroying the resonance in it.
Kapanadze apparently found a way according to Tesla.
In the photo I see capacitors and a coil - this is an oscillatory circuit!

r2fpl, yes, exactly as Kapanadze said- no one could get him to work.
Wesley, but what do you think consumes 60-100vat in the Bank video? This is the pumping of an oscillatory circuit!

Pay me $ 100 once, but per user! I discover the principle of Kapanadze!

Let's all laugh!


Wesley, I’ll send a private video, it is only for your eyes, as a confirmation of this scheme
I knew that Wesley would put this video out a little, although he was asked not to do it.
The fact that, alas, there is no trust .... good luck, the paths diverge!
You comedian wesley

''The principle is very simple - there is an oscillatory circuit, serial or parallel, which accumulates an electromagnetic field in itself. Everyone knows that a huge reactive current is walking there, but you cannot extract it - the resonance is collapsing.
But I think that using an inductor and a capacitor charged to a high voltage (Tesla's circuit), this field can be shifted towards the pickup coil, creating an EMF in it!
You know, I’ve been searching for a long time, but this option came to my mind just recently, for the new year, I will test this theory myself and suggest that everyone who is interested in doing this too! ''

all the systems of Akula, Ruslan, Alexeev and others work according to this principle, we must not reinvent the wheel.

Onepower , That would be wonderful !
Thank you ,// Chet

   Guys:
   The theory of operation for the TK, Akula, Stalker, Adrian, type of devices has been presented and repeated many times, and yet still no one can come of with a working replication. WHY? Do we really need to keep repeating it? Has it not sunk in yet?
   I think that I am very close to how Ruslan, Stalker, and Adrian did it. But, also think that my sync is not perfect. I do need the right type of tuning caps, as each device is built a little differently. With different yokes, wires, caps, diode bridges, load types, etz... So, where do I go from here. Well perhaps to obtain the needed caps, firstly. Yet as conico said about my cost for a $4 2000v 0.47uf cap being over $30, yes, more like $34 or more now, is more than highway robbery. That does piss me off, not just for that component, but for all things now being imported into my country. Which takes most the fun, out of building things for me now, after a full three months of not being able to make a living. Did TK need to use complex nanopulsers, with delays, to achieve his first devices. Was he not surrounded by knowledgeable people, that would not just get faked out by some hidden means. Was Wesley faked out at Akula's house, as well.  I doubt it.  Yet, is Akula lighting his house with his device, now. I doubt that, also. Especially after the death of Adrian. Why else would someone want to kill him. Why the whole story is not being told, or known?
  I also think that Geo was or is very close to hitting on it. Time will tell... but, if he would only get back with us, one way or the other. I know that he is reading these posts, he told me so. My best wishes to him. May God, help him, and keep him safe.
   NickZ
 

Nick,
It is insane to replicate someones work without even knowing what principle it uses to function properly.
Aldo, it is on schematic you use.


On transformer, primary 20 turns, secondary 40 turns we will got always double the voltage, halved the amps.
Can you get on this transformer same voltage and amps on secondary, no matter of number of turns?
You will say no!


Are you sure?
Supose we can.
Turn around windings.
Now the primary has 40 turns and secondary 20.
Primary will spend how much according to secondary?
And you still be geting same voltage and amps on secondary.


Is it possible?


The other thing is inductance related, it is also on your schematics which you use.
Invisible to you, because it is obvious too much.
If you zero the fields, what will happen to rest of the circuit?
Ask Chris.
He is on the right path.
The whole thing does not produce overunity.
Combined with second ingredient it forces source to spend very little.
That is why Chris is close.


It is like this:
Source is providing 100W. On secondary you got 80W (losses).
But then you force the source to spent only 5W, while you still got 80W on output.
It is inductance related.
You will never find it doing it your way.
Because, you all looking to get more on output using simple transformation of transformer, which can not give you more on u output.
Even superposition of HV will not help you, because it is simple transformation.
Transformers only transform, always with losses.
Superposition of fields only adds, always with losses.


It is on your scheme.

Chris,


I like this picture you posted so much.
It tells a 1000 words.


About Floyd Sweet magnets.
If the magnets interact with coils, there will be so much force between them.
And on pictures, magnets are wrapt with losse tape.
In magnet electric motors, magnets are usually nailed to chasis with screws,
so they can not move under strong forces.
Especially on forces which provides 5 or more kW.


So, magnets in Floyds device does not play any role at all.
But bucking or opposing fields does.


Why was vibrations present in Steven Marks devices?
What happens in bucking coils under few kW of power?
They repel creating strong vibrations and heat.


Of course, few litres of epoxy can sustain vibrations.


Yes, you are right on those things.