Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11689580 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21990 on: May 08, 2020, 05:24:32 PM »
  Yea, you're trying to get somewhere, alright. There's plenty of room at the asylum.

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21991 on: May 08, 2020, 08:00:33 PM »
Soliman, did you post this circuit diagram, How did you get on with it ?

Dally Thread 1411 page
« Last Edit: May 09, 2020, 12:28:22 AM by Raycathode »

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21992 on: May 09, 2020, 12:29:05 AM »
Yes, but this does not work at all
sinewave oscillator does not work
for me.

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21993 on: May 09, 2020, 09:02:35 AM »
,
« Last Edit: May 09, 2020, 06:12:10 PM by lancaIV »

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21994 on: May 09, 2020, 02:19:32 PM »
Yes, but this does not work at all
sinewave oscillator does not work
for me.
Soliman  I think that Oscilator is used to sine wave modulate the TL494 at 50 or 60 hz

if you have any spair gates like a CD 4093 ect smit trigger or a TTL 74 HC14 rig it to oscilklate at 50 or 60 hz
or even a opamp set up for a square wave ocilation. A lot of stuff on here is incompleate or un finished or even BS.
and drive a choke about 470uh then look up the resonant value of cap fot that frequency and you will get your sine wave.

https://m0ukd.com/calculators/quarter-wave-ground-plane-antenna-calculator/

Raymondo

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21995 on: May 09, 2020, 05:07:28 PM »
   Lanca:   You have posted on 10 or more threads on this forum, today. Only a real troll does that to disrupt the normal postings.
   You are not welcome on this thread, I had mentioned to you this before. Nor have you ever posted a single useful post, ever.   
    Ray:  You really don't know what the hell you are telling people. And that gives this thread a bad rap.
Or just keeping guessing, and lose all of the tiny credibility that you may have once had, here.
    You are trying to tell people what to do, when you have no clue. Great advice...
    NickZ

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21996 on: May 09, 2020, 07:42:11 PM »
   Lanca:   You have posted on 10 or more threads on this forum, today. Only a real troll does that to disrupt the normal postings.
   You are not welcome on this thread, I had mentioned to you this before. Nor have you ever posted a single useful post, ever.   
    Ray:  You really don't know what the hell you are telling people. And that gives this thread a bad rap.
Or just keeping guessing, and lose all of the tiny credibility that you may have once had, here.
    You are trying to tell people what to do, when you have no clue. Great advice...
    NickZ
Nick that is impertinently rude with all dew respect how would you know, I have a degree in Electronics and I know exactly what I’m talking about
you might live where Zero point energy can be exploited. What is the difference between a sine wave and a sqr wave ?
find that out and you will know how to pull a pure sign wave from it.

I bet you cant do this with your katcher coil using the battery terminal to an earth clip.


Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21997 on: May 09, 2020, 08:16:43 PM »
Nick the poinmt here is Soliman might have built this circuit up and the sign wave modulation might be all that is he is missing
I don't see any one else trying to help him out, do you ?

Raymondo

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21998 on: May 09, 2020, 08:59:14 PM »
   Ray:   You may have some basic knowledge of electronics, but the best builders that we've had on this thread, can't crack this nut.
   
   I know how to run my own 494 circuit, as a controllable frequency and duty cycle square wave signal at the FETS, but it becomes a normal sine wave at the yoke, on. OK?   I would not trust nor build up the circuit that soliman is showing, in the first place.
   He can buy a ready made TL494 board, for less than 10 dollars. Or, I can show him the Stalker schematic, which I've already posted several times, since that 494 circuit does work as it should. Maybe he should start with the basics, and work from there.
   

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21999 on: May 09, 2020, 09:41:58 PM »
   Ray:   You may have some basic knowledge of electronics, but the best builders that we've had on this thread, can't crack this nut.
   
   I know how to run my own 494 circuit, as a controllable frequency and duty cycle square wave signal at the FETS, but it becomes a normal sine wave at the yoke, on. OK?   I would not trust nor build up the circuit that soliman is showing, in the first place.
   He can buy a ready made TL494 board, for less than 10 dollars. Or, I can show him the Stalker schematic, which I've already posted several times, since that 494 circuit does work as it should. Maybe he should start with the basics, and work from there.
 
Well look at it this way you live in a rain forest water can only travel up a fine bore tube a few feet at the most
the canopy of the rain forst can be over a 100ft how does the sap travel all the way up to the top when sciantists say it's imposible.
It doesnt work when we don't understand whats happening or how to do it.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22000 on: May 09, 2020, 09:50:38 PM »
   Well, I hope that it will help you to come up with a self runner. Otherwise, you just keep going on and on and on and on and...

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22001 on: May 10, 2020, 03:38:56 PM »
Hi Soliman,
it is ok, you are doing your best :) and doing good in translation.
Pin 3 I'm not even using it in my setup. But it is the PWM comparator pin or feedback.
Not sure if it is used to auto tune while load is connected...Panov was not sure for what it was, written on the pic.
I traced the wire and pin 3 and it goes to the board before the kacher circuit, to a dip switch with 2 levers.
it is then connected to the CD4017 Chip. hmm
But that leg where PIN 3 is connected which is the C1 is the "clock input" leg #14 on the CD4017 Chip.
So to say CD407 is receiving Pulse signals from the TL494's pin3 white wire.
Hmmm Funny .. Might seem it works with the relay on the board maybe.
But to be sure it has to do with the start and stop of the system buttons.

In picture below you will see the pic of that circuit where the white wire is connected to the dip switch blue.
I have drawn arrows in red to show you what to see.

Hello Geo, and the others.
I would like to know, to obtain something similar, how your kacher operates
how to tune the ground wire with the kacher.
What happens if I make the ground wire longer or shorter?
what is the length of the ground wire that you use, and the length of the kacher coil?
my kacher is very weak 0.5Amp. or it is very lethal 5Amp.
I would like to have something moderate. It doesn't matter if I use 24volt DC, or if I use
150volt or 90volt. or 50volt. is always weak or lethal.
The length of my ground wire is 32 meters, but this does not produce any effect when connecting or disconnecting it.
to what extent you use the Steven Mark circuit.?
excuse me for asking so much. I seek help because I am working hard on this.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22002 on: May 10, 2020, 04:03:10 PM »
   Soliman:   As I had mentioned, the ground wire is the same size as the grenade output coil.  37.5 meters long, or 40 meters depending on your grenade length. This is all stated in the schematics, if you use the right one. Both the grenade as well as the Kacher are connected to this ground. If you get no interaction from the ground line, it normally means that there is no proper sync in both circuits. The ground will work well when there is a proper sync, and the ground line being thick and the right size. If there is no response, check the sync. Both my inductor and the grenades coils run at the same frequency, about 18 or 19KHz, and not like you are suggesting.  You can see the difference in Geo's output on some of his videos,  when he disconnects the ground line from the circuits.  The best streams on the antenna coil should be somewhere between 3mm to 5mm long. Any longer and the streams will ground out, or burn the components on the induction circuit. 
   The signal at the fets is a square wave, but at the yoke/grenade the signal will be a sine wave.
   This device has little to nothing to do with Steven Marks devices or diagrams.
    I hope this helps.   NickZ

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22003 on: May 10, 2020, 04:35:28 PM »
Soliman, for your katcher look Ruslan's video, he use the oscilloscope in base and collector of SC5200 and use variable resistor.

https://www.youtube.com/watch?v=zbfsdamSbXw
from minute 13-14

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22004 on: May 10, 2020, 09:11:18 PM »
Ruslan say this.
Video for those who want to repeat this device. I hope that I have sufficiently cleaned it up from the verbal slag so that the main points of production and debugging are more understandable. If anyone wants, then download https://yadi.sk/i/RPd07eQJe23us. I think that the author will not be angry, I just removed repetitions and transitions to personalities in order to facilitate the perception of the topic of the case.
For those who fail, there is comforting news - an Italian engineer with an excellent surname Rossi made a nuclear fusion unit. Our academics from the Kurchatov Institute confirmed that everything works. The main thing with grounding will not be any trouble. The Italian is already making a 20 kW generator plant. Expected cost (optimistic forecast) 500 bucks, charging cost 10 bucks. Charging time is six months. In general, you won’t stop the progress, especially since the power engineers will not succeed because their lines are constantly torn, leaving hundreds of settlements without energy. And fan cut-offs and just cut-offs of anyone are moved to buy such an autonomous source.
Good luck to all.

On the High res video Ruslan slaps his hand on the TC Katcher Qu how come it doesn't go of tune in any way shape or form ?  ;D ;D