Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715601 times)

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21915 on: April 30, 2020, 09:49:06 PM »

Hi.
how to make RM (radio moscow) without noise:
1-use only the 28-turn coil (the 4-turn coil leaves it disconnected for now)
   connect it in series as is common with the grenade. Here look for the resonant frequency
   The more voltage it delivers with the lower consumption of the power source.
   write down this frequency. in my case it was 18.51Khz duty cycle about 35%
2-move the frequency to half the resonant frequency, in my case it is 9.55Khz
 move duty cycle to 22.4%
3-turn on the kacher and move the face up to interact with the system.
  solpresa. what happened to me. the frequency jumped up to 18.51Khz the duty cycle was up to 44.8%
  even more one of the gate mosfet is removed.
4- I would like you to do this and tell me your experience with this matter.
    You. It will have a powerful system, but the most important is that it has no noise.
5- oh, and at the end connect some small capacitor on the 4-turn coil
   and this will give you more power with the correct capacitor.
   the capacitor you use is 0.33uf 2000Volt WIMA.
   then in the 4 laps I put 2 * 0.15uf 2000Volt WIMA in series.
6- this is very powerful and has no noise.
7- End.


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21916 on: April 30, 2020, 10:21:50 PM »
   Soliman:   All well and good, but is it OU? Is it able to self run?
   Perhaps you can post a video, showling the Radio Moscow effect but, without the noise.   The RM type of noise is not a  prerequisite, nor important, but it normally comes as a sign of the  interaction between the kacher's HV and the induction circuits (both).

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21917 on: April 30, 2020, 10:41:41 PM »
   Soliman:   If you are running the circuit on one Fet, that was also tried and tested. Again that resulted in no OU.

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21918 on: April 30, 2020, 10:59:27 PM »
nerd.
this happens only when you turn on the kacher.
the frequency doubles and the duty cycle. that's how I got the power
and the noise is removed.

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21919 on: April 30, 2020, 11:12:05 PM »
when it is written "noise" https://translate.google.com/translate?hl=de&sl=de&tl=en&u=https%3A%2F%2Fde.wikipedia.org%2Fwiki%2FRauschen_%28Physik%29


where is the "silence"-limit ?


When we have "Hintergrund"-noise/background-noise  what can be/is "Vordergrund"-noise/foreground-noise  ? Frequenz-spectrum ?




Sincerely


OCWL

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21920 on: April 30, 2020, 11:13:04 PM »
   As the load of bulbs also becomes a working part of the circuit, it's important to test the output to the input with a load of a few hundred watts. Along with the right ground line, as well.Once a feed back circuit is connected up, we can see IF the system will self sustain itself, or not. As this loop takes a lot of juice to operate, also.

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21921 on: May 01, 2020, 12:03:25 AM »
NickZ
try to do my setting and then we can comment on it. please

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21922 on: May 01, 2020, 03:38:29 AM »
Soliman,
 I have some noise in Push-pull.
What kind of snubber did you use, just like in the photo below?

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21923 on: May 01, 2020, 12:16:29 PM »
Hi Mr Conico I don’t use that type of snubbing it wastes energy and produces execs heat, I use 2 diodes of the drains with a cap and a resister back into the supply but why not bifilar wind the centre tap ( the 12 BNT winding )-( drain - power in - drain) that way it gets absorbed by the core and you don’t get the ringing.

PS

While your on is your Tesla Katcher coil the self oscillating coil circuit, do you have trouble getting it to oscillate with a reduced winding on the long primary winding ? only the drive transistor ends up with a reduced rail to rail swing ! but there is a way round that problem.###

Regards Raymondo



conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21924 on: May 01, 2020, 01:15:21 PM »
Hi!

''bifilar wind the centre tap ( the 12 BNT winding )-( drain - power in - drain) that way it gets absorbed by the core and you don’t get the ringing.''
Can you make a drawing on that winding?

For Soliman,
Duty cycle 28% , frequnecy 16.9-17 Khz, 244Vpp and 7 Amps  from PSU on the little movie
 What's next?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21925 on: May 01, 2020, 03:11:03 PM »
NickZ
try to do my setting and then we can comment on it. please

   You have not shown me just what your device can do, as I have asked. You've shown no output readings, nor shown any load. Therefore, I will not detune my device, as I don't believe that you have something that actually works.
    Please show what you have first,  and want me to replicate. I don't care if your system does not make noise, as that is NOT important to me at all. Ruslan's devices don't make noise, either.  So that is not something that I should follow. As normally it means that your running frequency is above the hear able range. Which for me is about 11.5Khz, or so, instead of 20Khz.
  The idea that your system changes itself to a different frequency by itself, is not a good sign. A good sign is when the output is what higher than your input, and can self run. Obviously, you are not there yet.
  I have worked on tuning my device for a couple of years, just to have what I have now. So, please understand, that I will not follow what you've done, until I see that you have got something that actually works, right.   Until you connect a feed back path, as well as the big 200w to 500w load of bulbs, and a 37.5m ground line, you will not be able to properly tune your device, like what you are doing now.

Raycathode

  • Sr. Member
  • ****
  • Posts: 450
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21926 on: May 01, 2020, 04:33:38 PM »
Hi!

''bifilar wind the centre tap ( the 12 BNT winding )-( drain - power in - drain) that way it gets absorbed by the core and you don’t get the ringing.''
Can you make a drawing on that winding?

For Soliman,
Duty cycle 28% , frequnecy 16.9-17 Khz, 244Vpp and 7 Amps  from PSU on the little movie
 What's next?
Like this

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21927 on: May 01, 2020, 07:44:15 PM »
   What's next?  Good question. 
   Here, I'm showing the partial lighting of 3 100w bulbs. Input power is about 144w.  No it's not OU, but it's getting there. Perhaps...  I made many tests on snubber circuits, and ended up not only using snubbers on both fets, but made a separate additional snubber, circuit which is between the TL494 circuit, and the yoke. 
  The only person who has made a complete system, with a feed back loop, proper ground line, and showing the input power, is Geo. As he was also able to light up some huge bulbs, as well. Which is something that most of you (members here) can't do, yet. And is one indication of the visible output. If I connect any scope probe ground line, or voltmeter negative probe, to the circuit, to measure the output with, it will KILL (short out) the HV from the Kacher circuit. And give inaccurate readings. So, it's not so easy to see input to output readings correctly, in a conventional way.   NickZ
   
   

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21928 on: May 01, 2020, 08:08:32 PM »
NickZ, is not that hard to follow Soliman 18Khz , just add a 150nF cap on 25-28 turns and 330nF on output , before bridge rectifier.
with 30% duty cycle on push-pull you will see the maximum voltage will be at around 18 Khz.

I chose 28% D-Cicle (duty-cycle) because at higher D-cycle the current is more then 10 amps from PSU.
I chose 17Khz because the grenade coil has big amplitude at 1,7 Mhz.

Raycathode I do understand that bifilar on Yoke, I hope i will not need snubbers.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21929 on: May 01, 2020, 08:19:27 PM »
   Oh, it needs big amps does it. Like over 10 amps... And what will it do, with a 500w load on it?   Since 24v times 10 amps is 240 watts, or even higher input draw. Did you see what Geo did with 24v and 5 amps???
   Why don't you show me what the device can do with an over 240w input. Is it anywhere near OU. NO?
   Can it do what I'm showing in the last posts? So then, please show me why I should change my set up, first.
As all I've ever seen here on this thread are inefficient inverters, so far.
   Conico:  My induction circuit's running frequency is around 19KHz, already. Both the induction circuits 28t coil and the 3t coil are running at the SAME frequency.
   Perhaps you can follow with the tests that you think would work. As it can take days to get back what can be lost by such doing tests. And I don't like to go backwards.