Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11689085 times)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21390 on: June 09, 2019, 12:04:18 PM »

Hi Nick,

hard to say anything about that scopeshot.
It all depends on how you hooked up the probes, the phase shift looks "almost" 180°, but if you swap one of
the probes (if possible at all due to grounding), it also can be "almost" 0°.

The small difference in phase (almost 180° or almost 0°) can be due to the probes being not equal or your scope
internals, or a slight "off resonance", etc.

I know from past experience with this type of circuit that probing around without double checking your probes
groundleads can cause all kind of unexpected results.

Itsu

DavidWolff

  • Jr. Member
  • **
  • Posts: 75
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21391 on: June 09, 2019, 02:16:56 PM »
You guys I not been on here in a while, I was on a Russian thread and found a guy talking and showing his working unit its not a like any on your tread I only got working wave form oscillograph and it all crashed I lost pointer so don't ask you Lucy I got this.

Dave

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21392 on: June 09, 2019, 04:26:27 PM »
   Soliman:   I don't understand your diagram.  The 28t coil is going nowhere?  There is no ground line connected, also.
Maybe having a ground line connected does not matter, or maybe it does. But, the important point is what does your tuning show at the output, (bulbs). As you can have a great signal showing the phase change, but, having little output to show for at the bulbs.

   Itsu: Thanks for your reply.  I'll check my probes.
   I'm using a 10x probe on the yellow trace at C1, and a 100x probe on the grenade output at C2. As the C2 voltage point can go to over 1000v at times.
   What we really need is full instructions on the proper procedure for tuning this device, without having to guess.
   Like step 1.          step 2.          step 3...
    T-1000:  I retuned my Kacher circuit to run at 1.6MHz. I can control the frequency by connecting to different points on the Kacher secondary coil. However, there is very little voltage output at that point. The best frequency point is around 1MHz.
   I'll know more soon as I'm still playing around with all this. I still have the CT on the ground line for further tests.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21393 on: June 09, 2019, 05:18:06 PM »
   Soliman:   I don't understand your diagram.  The 28t coil is going nowhere?  There is no ground line connected, also.
Maybe having a ground line connected does not matter, or maybe it does. But, the important point is what does your tuning show at the output, (bulbs). As you can have a great signal showing the phase change, but, having little output to show for at the bulbs.

   Itsu: Thanks for your reply.  I'll check my probes.
   I'm using a 10x probe on the yellow trace at C1, and a 100x probe on the grenade output at C2. As the C2 voltage point can go to over 1000v at times.
   What we really need is full instructions on the proper procedure for tuning this device, without having to guess.
   Like step 1.          step 2.          step 3... sounds like you been listening to Eddie Cochran LP
    T-1000:  I retuned my Kacher circuit to run at 1.6MHz. I can control the frequency by connecting to different points on the Kacher secondary coil. However, there is very little voltage output at that point. The best frequency point is around 1MHz.
   I'll know more soon as I'm still playing around with all this. I still have the CT on the ground line for further tests.
you can put HV caps across your HV winding and it's driver from collector to ground and that will tune the katcher too.

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21394 on: June 09, 2019, 06:02:42 PM »
A very interesting video from Don Smith, Watch it! cus it's not one ive seen before.

https://www.youtube.com/watch?v=BHr3eDELyHk&list=UUu1hNQsr9YnkIjFkMAc3Npw&index=19

I did watch the video.
At 57:31 Don pulls from diode bridge DC and AC line for further transformation.
He is mixing AC and DC.
Essentially he pulls something like pulsed DC from his AC HF coil.

Is this what a.king is talking about, or Don Smith?

From RF to usable energy by using mix of AC and DC?
Or is it one of the Don Smith errors in drawing schematics?

Somebody from audience asked him same question and he draws that part again but skips to draw points on diode bridge where it is connected.

What do you think?

Thanks!

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21395 on: June 09, 2019, 08:01:32 PM »

Quote from: mkjekyll on June 06, 2019, 11:35:46 PM<blockquote>Wesley,

A short while back we were talking VNA's and you were kind enough to make some recommendations the final one being the PCI card unit.

I found this AIM unit interesting and would love your opinion concerning it's specs since you are much more knowledgeable in this gear.  I showed it to you before and not sure if your response was humbug or what.  I like the fact it is very modern, inexpensive and has been recommended by some RF guys I know.  However I am not sure of our requirements besides S parameters and the frequency.

https://www.arraysolutions.com/antenna-analyzers%20/vna-uhf

I am coming back on some time and look forward to going down that one rabbit hole.

Thanks,
Mick
</blockquote>
Hi Mkjekyll,

F.Y.I.
Bode 100 Vector Network Analyer [approx $5,500 US]

https://www.picotest.com/products_BODE100.html

Coverage: 1Hz thru 50MHz (more than adequate for excess energy work and industrial power)

We use this VNA instrument extensively for insitu analysis of the "Ruslan" type devices.

Also,
Analog Discovery 2 [approx $300 US, student discounts approx $200 US]

https://analogdiscovery.com/

Another, more cost effective, multi-instrument, is the Digilent Analog Discovery 2 which includes a VNA feature
amongst many other capabilities (2 CH Scope; 2 CH AWG; 16 CH Logic Analyzer or mixed Pattern Generator;
16 CH Digital I/O; built-in Power Supplies; Voltmeters; 2 CH Spectrum Analyzer - shared with scope; advanced
waveforms, and so forth).

Coverage: VNA 1Hz thru 10MHz; instrument in general: 12MHz @ 3dB, 4MHz @ 0.5dB, 1MHz @ 0.1dB. Sample Rate (real) 100 MSPS; AWG slew rate 10V step 400V/uSec. Full Spec Sheet:

https://reference.digilentinc.com/reference/instrumentation/analog-discovery-2/specifications

We are developing a variety of "Excess Energy Generation" Application Notes based around the Analog Discovery 2 instrument, primarily for the "Maker Mark" groups. Appears to be a"great bang for the buck!"

Regards, SL

FIN

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21396 on: June 09, 2019, 08:57:46 PM »
I did watch the video.
At 57:31 Don pulls from diode bridge DC and AC line for further transformation.
He is mixing AC and DC.
Essentially he pulls something like pulsed DC from his AC HF coil.

Is this what a.king is talking about, or Don Smith?

From RF to usable energy by using mix of AC and DC?
Or is it one of the Don Smith errors in drawing schematics?

Somebody from audience asked him same question and he draws that part again but skips to draw points on diode bridge where it is connected.

What do you think?

Thanks!


I regret to inform you that this is probably a scam!
https://youtu.be/INPIfDGfMGs?list=UUu1hNQsr9YnkIjFkMAc3Npw&t=9390


Did nobody see it!
There is nothing to translate here. He switched on the power supply from the black case by inverter 110V / 60Hz
The light bulbs turn on immediately. They should ignite smoothly.


It's sad because so many people believe in it.



NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21397 on: June 09, 2019, 09:20:06 PM »
   T-1000:   Here's a little video that I just uploaded, concerning the Kacher's frequency and voltage tests on the Earth ground line.   Funny, even before I could post the link to the video below, there had already been several views of it on YouTube.
   https://youtu.be/YhRvQOyvkD4
   EDIT:  Guys, do you think that you're going to figure out how Don Smith's devices work, without even building them?   How many years have people like at Energetic Forum and other forums been trying to replicate his work. Yet, no cigar.   Don never gave away his secret. Nor did Kapanadze, they would rather die, before spilling the beans. Old farts...
« Last Edit: June 10, 2019, 01:13:48 AM by NickZ »

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21398 on: June 10, 2019, 12:47:46 AM »

   EDIT:  Guys, do you think that you're going to figure out how Don Smith's devices work, without even building them?   How many years have people like at Energetic Rorum and other forums being trying to replicate his work. Yet, no cigar.   Don never gave away his secret. Nor did Kapanadze, they would rather die, before spilling the beans.

Nick,

You don't know how right you are. They all will rather die than share it!
I wish them smooth departure! But it is on luck! Sometimes departure can be very painful, depends on their deeds.
How powerful can be greed and hunger to be god with small g.

We can not learn a dime from them. Nothing!

Kapanadze is old man. What he have? Glory? He could! But he choose to be nothing!
He made powerful device. True!

How much time we will remember him? Year or two, maybe four.
Some kid on the block will make better! It is matter of time!

It exists, somebody will found it again and again until it bursts to the world.
And in history nobody will remember Kapanadze!
He is past time. His device still lives, but Kapanadze itself is at the end of road. He had his time!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21399 on: June 10, 2019, 12:52:59 AM »

I regret to inform you that this is probably a scam!
https://youtu.be/INPIfDGfMGs?list=UUu1hNQsr9YnkIjFkMAc3Npw&t=9390


Did nobody see it!
There is nothing to translate here. He switched on the power supply from the black case by inverter 110V / 60Hz
The light bulbs turn on immediately. They should ignite smoothly.


It's sad because so many people believe in it.

And, yes, you are probably 289% right! Not 100%.
I watched a video and trying to understand his mumbling, how HF is efficient and you have to transform it 3 times to be useful.
You are right! Nothing there.! Wall! And card tricks.

If he had something, he would open that suitcase and show what is inside.! True!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21400 on: June 10, 2019, 01:05:48 AM »
https://youtu.be/INPIfDGfMGs?list=UUu1hNQsr9YnkIjFkMAc3Npw&t=9390

In this video he runs it only for 3 min.
Why he didn't leave it for 60 min.

He can't!
He have to shut it down after 3 min.

Don is useless! Period.

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21401 on: June 10, 2019, 01:20:42 AM »
The most valuable currency in the world is not US Dollar or Euro!
No!

It is time we got!

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21402 on: June 10, 2019, 01:58:57 AM »
   T-1000:   Here's a little video that I just uploaded, concerning the Kacher's frequency and voltage tests on the Earth ground line.   Funny, even before I could post the link to the video below, there had already been several views of it on YouTube.
   https://youtu.be/YhRvQOyvkD4



Thanks for making video. So it is 1.63MHz? Is it same frequency when CT have plastic core and not ferrite?


Do you have 10 or 100 Ohm resistor across ground CT wires? It is needed there.

Here are few things I would like to see if they make difference:
1) The scope ground - what happens if you have it on mains ground instead and not the ground your test bench is using?
2) The grenade coil - would you able to make another one with all windings to one direction for testing? Like the one I shared previously - https://imgur.com/a/2OnO8Mk
3) It would be interesting to see if the push-pull can be tuned to odd frequency (with highest amplitude possible) of 1.63MHz and Tesla output on 1.63MHz with help of high voltage capacitor instead of ferrite rod. Wonder if you may get grenade output influenced. And if yes, the short bursts of Tesla coil on/off on peak of series resonance current on grenade inductor might improve output.


Cheers!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21403 on: June 10, 2019, 02:22:17 AM »
   T-1000:   Here's a little video that I just uploaded, concerning the Kacher's frequency and voltage tests on the Earth ground line.   Funny, even before I could post the link to the video below, there had already been several views of it on YouTube.
   https://youtu.be/YhRvQOyvkD4
   EDIT:  Guys, do you think that you're going to figure out how Don Smith's devices work, without even building them?   How many years have people like at Energetic Forum and other forums been trying to replicate his work. Yet, no cigar.   Don never gave away his secret. Nor did Kapanadze, they would rather die, before spilling the beans. Old farts...

From your video I can see how much time you invested. Very clean and nice.
Man, i do appreciate what you have done.

Good luck! My best!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21404 on: June 10, 2019, 03:22:47 AM »

Thanks for making video. So it is 1.63MHz? Is it same frequency when CT have plastic core and not ferrite?


Do you have 10 or 100 Ohm resistor across ground CT wires? It is needed there.

Here are few things I would like to see if they make difference:
1) The scope ground - what happens if you have it on mains ground instead and not the ground your test bench is using?
2) The grenade coil - would you able to make another one with all windings to one direction for testing? Like the one I shared previously - https://imgur.com/a/2OnO8Mk
3) It would be interesting to see if the push-pull can be tuned to odd frequency (with highest amplitude possible) of 1.63MHz and Tesla output on 1.63MHz with help of high voltage capacitor instead of ferrite rod. Wonder if you may get grenade output influenced. And if yes, the short bursts of Tesla coil on/off on peak of series resonance current on grenade inductor might improve output.


Cheers!
[/quote


   T-1000:  Ok, well I'll try to wind another torroid core (just an air core), and put a resistor on there, for the ground line test.I thought that the resistor should be there, but I didn't know what value it should be. So, thanks for that tip.
    I am not going to be making a new grenade, as I feel that the one that I have is made to the right specs, and is working as it should.
    Connecting the scope negative probes to different mains AC ground? Not the Earth ground? Sounds kind of strange, but I'll see what I can do about that. I do have TWO 37.5 meter Earth ground lines going to my water well that's in my back yard, also.   The push pull circuit will not go to 1.6MHz, like the Kacher circuit can. But, my Kacher has no guts, at 1.5, 1.6, or 1.8MHz, and just shows small one mm sparks, at those frequencies. It seams to run best at around 1Mhz, or so, depending on the load that's on the grenade. What size cap to substitute for the ferrite rod that's by the antenna coil?
    No matter how well the signals may look on the scope, the real proof is at the output. As a great looking signal, but showing a lousy output, is not good. So... the main thing for me at this point is to be able to run the feed back path, and to see at least a 10w bulb lighting, while the device is self running. Sometimes I feel that the using the scope is more of a distraction.I'll try to make any of the suggested changes to the device, one step at a time, otherwise, I could be out chasing turkeys, again.   I think that I have followed the TopRuslan 7 replication fairly closely, it was suppose to be a self runner, but, I have not been able to find the proper sync that allows for self running, as yet.       
 NickZ