Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718269 times)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21345 on: June 03, 2019, 02:03:57 AM »
If I connect the scope ground up it messes with the readings,
so I have to leave it disconnected. Sometimes it works that way, but not really.
When using scope if it too close to Tesla coil it might mess up readings. You can try to move CT more away and see if that fixes issue. Also the main point about  ground reading is to determine on what frequency Tesla should be working on in bursts. Then grenade frequency + push-pull to odd harmonics to that.

Cheers!


Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21346 on: June 03, 2019, 09:24:37 AM »
  Here's a video that I haven't seen, or at least remember.
  Is his device supposed to be a self runner?
    https://youtu.be/YMX_-Y0r1fU
   
Nick,
Its clearly not a self runner as it is running from a mains PSU.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21347 on: June 03, 2019, 12:53:16 PM »



The picture is from the video and the other picture is from pdf from Fabrice André where he talks about automatic resonance ( he writes: "you have to find a way that L1 and L2 are at automatic resonance" )
You are ignoring this passage and the drawing to the right and in your  comedy act about self runner, if it ain't moving it's dead.
Also in Wesleys video at 300 what's a shxxa he says it a few times in the video i'm not trying to wind any one up i'm trying to make you
understand there are a lot of forces at work in a 'device', and if you got the phenomena to run as such you would have a self runner other wise
if it ran once you wouldn't not notice it was running, silly boy  ;D ;D

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21348 on: June 03, 2019, 01:39:50 PM »
Friendly advice:
Dear WhatIsIt.
Very experienced  and  quite consolidated crowd don't want to get back in time again  and again.
All or most of that what you are interested with  was hundreds times posted, discussed, and commented.
It is unfortunate but:
knowledge of  past events  in FE
knowledge of  previous  art in FE
  is  just expected to be a  base  for discussion.
Everyone can  be scrutinized including me . You are  not  different.   

Wesley

Wesley Stivep,

What you just wrote means that you are not experienced and consolidated at all.
But at the contrary, you just admitted that you don't have knowledge, experience and brain to crack that simple device.
So, your only action and option is to abandon research and skip it and move on because of your lack of needed knowledge or understanding for solving Kapanadze secret design.

Quote
All or most of that what you are interested with  was hundreds times posted, discussed, and commented.
And in every of that hundreds of posts and talks you failed to solve device!
You wrote about your failure, you realize that, if you are that smart?

That does not mean that someone else can not try.
Your words tell us all that you think you are the smartest person and if you can not solve secret, nobody else must not touch the subject any more.
Your EGO is tooo big to try again? You afraid that you fail again? So, help new researchers about Kapanadze. Tell them where you fail, help, don't BS.

Why I can not try? Or the others?
There are lot of new researchers who want to try and talk about it.

You failed, you didn't know how, that is only fact in your words.

Kapanadze is not too old news. And his device is interesting, because it is simple, not much parts involved.
Tesla is older, but, still we all talk about his designs. So, don't sell your BS to me!

Go and sell your superior intellect (very questionable) to someone else, please!



WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21349 on: June 03, 2019, 02:01:19 PM »
Friendly advice:
Dear WhatIsIt.
Very experienced  and  quite consolidated crowd don't want to get back in time again  and again.

Wesley

You call your friends here crowd, like cattle, while you are the brain?
That tells much about you!!

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21350 on: June 03, 2019, 02:24:20 PM »

DearWhatIsIt 
please concentrate on technical aspect and not on me and my futures.
Wesley

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21351 on: June 03, 2019, 02:50:33 PM »
DearWhatIsIt 
You presented Very much brilliant work of expanding my friendly small text to big and epic "poetry".. 
Yes I failed  to satisfy you and others like you.
But I didn't fail these few others who  found me  valuable and  worth to be their depository of Intellectual Property.
And the most important is that I can look  in the mirror and see face I don't hate for what it become.
Wesley

Your text was not friendly, you command me, to not talk about Kapanadze in Kapanadze thread just because you don't wont me here!
Buy a new mirror, you are not same person from before.
You call your friends who found you valuable "Crowd".

And stop pushing me because I want to talk about Kapanadze.
What's wrong with you? Too much radiation?

Go and build few more reactors, maybe next time you stand in front of your mirror you will glow?

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21352 on: June 03, 2019, 02:51:28 PM »
Can you guys keep on topic and try to avoid non-topic related posts out of thread please?
Would be much more constructive if you fire up Tesla coil and measure ground wire current while changing Tesla coil frequency.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21353 on: June 03, 2019, 03:28:55 PM »
Can you guys keep on topic and try to avoid non-topic related posts out of thread please?
Would be much more constructive if you fire up Tesla coil and measure ground wire current while changing Tesla coil frequency.
It's not an ex wing targeting a reactor exhaust port on the death star but we might be on a prison planet.
If we did focus on recent post though I would say some stuff might have a part but the whole Ruslan device is packed with
active importance one highlighted recently by a few is the hair pin circuit, it's that you need to focus on and find out how it
actively does it's job in stead of asking silly questions or arguing about splitting hairs. I suggest you look else where as you wont
find it on this tread although it makes good reading in depth should you decide read more than 10 pages back  8)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21354 on: June 03, 2019, 05:35:09 PM »
    Whatisit:   This thread topic was started based on the device made by Dally, Tariel Kapanadze's cousin.
Dally provided all the information to allow for a replication, which Tariel's device did NOT have. Yet, no one has been able to replicate it, either.
   As you can see Wesley is controlling his thread, like a bulldog. There is another Kapanadze thread though, which may work for you.
    So, if you'd like to talk about a Kapanadze device, it's best to use the other Kanandze thread. Not Stivep's thread, but the other Kapanadze thread. As Wesley comments about many different type of devices, many of them are not self running, nor have anything to do with free energy.

   Stivep:  Can you tell me why you think that the last posted link to the Stalker replication is NOT self running.
Hoppy said that he was using a PS, but, I see him disconnect it. Another fake, or what? As you know, I don't understand Russian.
     

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21355 on: June 03, 2019, 05:58:26 PM »
   Stivep:  Can you tell me why you think that the last posted link to the Stalker replication is NOT self running.
Hoppy said that he was using a PS, but, I see him disconnect it. Another fake, or what? As you know, I don't understand Russian.
     
0:35 he said, "no self-running",  0:42 "this is power supply", 1:00 "it is going to push-pull because when push-pull is connected to not separate power supply the power supply is going to blink mode and get stuck", 1:14 "this is power supply" (second)
Hopefully that helps.

Cheers!


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21356 on: June 03, 2019, 06:35:25 PM »
Can you guys keep on topic and try to avoid non-topic related posts out of thread please?
Would be much more constructive if you fire up Tesla coil and measure ground wire current while changing Tesla coil frequency.
   I have done that, at least with the voltage levels. I don't find anything of interest, there. Try it yourself, you'll see that having the scope connected to measure the voltage while the HV is ON, will negatively affect the readings. As the scope's ground probe kills the HV onto the grid's ground.
   Isn't the highest voltage reading similar as to the highest current readings? Both are at their highest levels. When the voltage is at it's highest tuning level, won't the current be at it's highest, also? 
   Both of my induction circuits as well as the ground line readings are all running at the SAME frequency. 22.6KHz.
   So, what should my Kacher circuit be running at, to match up, in theory using math? I can check to see if anybody is home, there.
   I only get a response from the Kacher when running at somewhere between 900 to 1.2MHz. That is it's best range, with best results depending on the load, of about 1MHz. The frequencies which are higher or lower, don't do anything, at all to the load of bulbs. Which is what I really look to, to tell me about the levels at the output, the load output readings.
   Although, on this test, I'm using no bulbs, or load. One scope probe is connected to the C2, and the other set of probes are on the current transformer (CT) which is connected to the earth ground line. I could make a video of it, but, there is not much to show. At best I get 50v output at the CT. Changing the frequency of the Kacher secondary coil, away from the  900 to 1.2MHz levels, does nothing, to increase the output at the bulbs. And I see no phase shift at the best running frequencies.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21357 on: June 03, 2019, 07:37:20 PM »
Nick are you getting the first 90 deg phase shift Soliman talks about ?no well what do you need to get or do to get that ?
Next question
do you get the second phase shift Soliman talks about in his posts ? totaling 180 deg
never mind about anything else ! as T1000 says 'stay on target Alec Guinness told Luke Hamell'!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21358 on: June 03, 2019, 07:50:08 PM »
   I see NO benefit in a phase change. Nor chasing that wild turkey...
Since where I get phase changes, there is very low output at the bulbs.   If soliman can show how well that phase shift works for him, (like at the output), and what it can really do, I'll give it some more thought. Remember those are old thoughts, and ideas. There may not be any phase shift in more recent devices.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21359 on: June 03, 2019, 08:59:21 PM »
   I see NO benefit in a phase change. Nor chasing that wild turkey...
Since where I get phase changes, there is very low output at the bulbs.   If soliman can show how well that phase shift works for him, (like at the output), and what it can really do, I'll give it some more thought. Remember those are old thoughts, and ideas. There may not be any phase shift in more recent devices.
so what is the main problem stopping fe magnetic motors ? come on Nelson tells you in one of his posts.