Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11820063 times)

x_name41 · « **Reply #21300 on:** May 25, 2019, 07:22:24 PM »

according to the latest data, the generator principle of Tariel Kapanadze is linked to the principle of Ismael Aviso

and the original explanation for this circuit:

Quote

#89026
Ничего не надо больше делать. Схема работает без всякой фапч , сама синхронизируется. Земля не требуется , это увод Капы. Главное запустить ключ. Он должен слегка быть открытым. Здесь загвоздка в том что ключ находится под переменным напряжением 15 - 20 вольт 50 гц. Иначе фокус не получится. Всех это смущает даже спецов. При таком режиме возникают малозатратный способом волны убийцы. Капа сжёг ведро транзисторов. Вы молодец умеете рисовать , а я чел прошлого века плохо владею айпадом. Пока все . Желаю удачи.

the "current amplifier" consists of a semiconductor switch which makes a short circuit in a very short time at the peak of the voltage sinusoidal waveform wherein the formed energy response without energy consumption is very large. It is this response intensifies and the current component of the inverter indirectly by forming a high voltage with high peak power and hence transforming it into a high current

and some original Aviso videos:
https://www.youtube.com/watch?v=lW7d38inLrc
https://www.youtube.com/watch?v=KgBdrHeZ1rE
https://www.youtube.com/watch?v=OsJ18GC4e_o

source: http://mazeto.net/index.php/topic,10995.msg103831.html#msg103831
http://mazeto.net/index.php/topic,10002.msg92002.html#msg92002

stivep · « **Reply #21301 on:** May 25, 2019, 10:04:44 PM »

translation of the picture
Wesley

soliman · « **Reply #21302 on:** May 26, 2019, 03:12:38 AM »

Quote from: NickZ on May 25, 2019, 01:31:43 AM

lanca: Does that mean that they charge $20 for a 100w solar panel? And, what are the delivery costs?
AG: Running only on a single 12v, 7ah battery this time, so just 12v input.
The scope probes are on: yellow channel 1, 3t coil at the C1 capacitor(s). Blue channel 2, is on the grenade's output C2 cap(s), before the full bridge rectifier. Feed back loop is connected, also.
I just saw this on my rig, and I didn't know if the two induction circuits scope shot is what you would call inverted in phase, or not. What do you think?

Hi, NickZ
if you do as follow you will have.
two resonance frequency.
1 will be 180 degree, the High one.
and other will be 90 degree out low frequency.
please let me know.

soliman · « **Reply #21303 on:** May 26, 2019, 03:28:41 AM »

the second picture.

WhatIsIt · « **Reply #21304 on:** May 26, 2019, 01:01:09 PM »

Hi, I am new here, so questions could sound weird!

How is inductor F2 connected to F3?
Air core, I presume.

And if we take energy from inductor F2 (resonant C1-F2), resonance will be destroyed.
When ever you touch resonant circuit you destroy resonance.
Am I wrong?

apecore · « **Reply #21305 on:** May 26, 2019, 02:18:17 PM »

Quote from: NickZ on May 25, 2019, 04:19:40 PM

apecore: Ok, but what is the point here? I can already see how much current I'm getting by the bulb brightness levels. What is the benefit is being able to measure it?
I have not heard any of the guys that have actually made a self runner (of this type), mention anything about a phase change, or its advantages. Akula, Ruslan, Stalker, Adrian, etz... Although I don't undestand Russian, should I take Wesley's word for it? What has the phase got to do with higher output or self running? Is there any scope shots of this phase shift from an actual self runner, while it's running and a scope is connected up? I just thought that after all that talk about it, that what my scope was telling me while running a around 30KHz, was different, but no better. AG seams to think that there is a phase change showing up there. I don't know, and is why I was asking about it. No exploding bulbs yet. But, the feed back loop is connected, and you can see the voltages that both the induction circuit are providing. When I place a 200w bulb on, of course the voltages drop considerably. But, the idea is to get the feed back PS to provide enough voltage, and current, to self run itself, at least with no load on. I have not been able to do that, as yet.

Nick,

You are right,... i m not informed enough about the selfrunning setups..
I guess you are far ahead of it on this item.
I guess resonance isn't the answer to a good working selfrunning system as where you are close to.

Greetings

NickZ · « **Reply #21306 on:** May 26, 2019, 05:18:03 PM »

Quote from: apecore on May 26, 2019, 02:18:17 PM

Nick,

You are right,... i m not informed enough about the selfrunning setups..
I guess you are far ahead of it on this item.
I guess resonance isn't the answer to a good working selfrunning system as where you are close to.

Greetings

apecore: I don't know what you mean by that. I never said anything about resonance not being important, I said it was extremely important. And that it's also important to tune the device with the proper ground line, and feed back loop all connected up.
I'm trying to understand this thing about the phase shift. As I don't see anything about that being important in what Ruslan mentioned above. Yet, can we trust what Ruslan says, and that was a while back. He said then, that the inductor circuit needs to be double the running frequency of the grenade output coil. But, is that really true? Mine both run at the same frequency.

Hoppy · « **Reply #21307 on:** May 26, 2019, 06:09:34 PM »

Quote from: NickZ on May 26, 2019, 05:18:03 PM

I'm trying to understand this thing about the phase shift. As I don't see anything about that being important in what Ruslan mentioned above. Yet, can we trust what Ruslan says, and that was a while back. He said then, that the inductor circuit needs to be double the running frequency of the grenade output coil. But, is that really true? Mine both run at the same frequency.

Given the latest revelation about Ruslan, I would take his past statements with a pinch of salt.

AlienGrey · « **Reply #21308 on:** May 26, 2019, 09:51:00 PM »

Pinch of salt? where are you placing that? have you watched the Ismael Abiso vids xmame41 was referring to?

https://www.youtube.com/watch?v=-pTny6cE9vc
https://www.youtube.com/watch?v=VNR0x_FwY04&t=12s
https://www.youtube.com/watch?v=F-Hai08epvs
He does talk about huge expensive development problems

Hoppy · « **Reply #21309 on:** May 26, 2019, 09:58:10 PM »

Quote from: AlienGrey on May 26, 2019, 09:51:00 PM

Pinch of salt? where are you placing that? have you watched the Ismael Abiso vids xmame41 was referring to?

https://www.youtube.com/watch?v=-pTny6cE9vc
https://www.youtube.com/watch?v=VNR0x_FwY04&t=12s
https://www.youtube.com/watch?v=F-Hai08epvs
He does talk about huge expensive development problems

Yep, I've seen all those videos of him hitting the waves.

NickZ · « **Reply #21310 on:** May 26, 2019, 10:00:51 PM »

That was all done years ago, where is Tariel's electric car today.

soliman · « **Reply #21311 on:** May 27, 2019, 05:21:16 AM »

hi, AlienGrey.
This is a simple explanation of the system.
here you can see that the 32khz are at 90 degrees and the 16khs are at 180 degrees. this is observing the two frequency at the same time with the oscilloscope.
my best wishes

NickZ · « **Reply #21312 on:** May 27, 2019, 04:57:52 PM »

Guys: This below, is what I obtained last night, with scope probes on the C1 and C2.
I was trying to tune like Ruslan suggested, but I don't get any response at 15KHz or 16KHz, nor at 30KHz to 32KHz, either.
My best frequency with no load on, is 22.6KHz on both induction circuits.
If I place a 105 cap on top of the other two caps that are on the C2,
I get 700v output, but my fets fry with that 105 cap on.
At 22KHz, the fets stay cool with just one 0.1uf wima, and a 0.22uf in parallel. Adding the 105 cap provides more output, but causing excess heating of the fets at best resonance.
First image below is with no Kacher on. Second image is with the Kacher on.
There is NO scope negative probe connected on the second image, as it messes up the way the device works, by shorting the HV, to ground. PHASE CHANGE? You tell me...

T-1000 · « **Reply #21313 on:** May 28, 2019, 01:34:32 AM »

Quote from: NickZ on May 27, 2019, 04:57:52 PM

Guys: This below, is what I obtained last night, with scope probes on the C1 and C2.
I was trying to tune like Ruslan suggested, but I don't get any response at 15KHz or 16KHz, nor at 30KHz to 32KHz, either.
My best frequency with no load on, is 22.6KHz on both induction circuits.

What is the frequency when you are getting max current on Earth ground wire?

NickZ · « **Reply #21314 on:** May 28, 2019, 02:22:03 AM »

Quote from: T-1000 on May 28, 2019, 01:34:32 AM

What is the frequency when you are getting max current on Earth ground wire?

T: I don't know as I haven't tried that yet.
I been trying to stay with one tuning method at a time. And also see what soliman and others are showing. Otherwise it can get pretty confusing. I been looking for this phase change between the two induction circuits. I don't know if that is important or not, so I'm looking into it a bit.
I was surprised last night when my voltages got up to 700v on the grenade output, without the full bridge rectifier connected, and no load. I still don't know as to whether I should be tuning for max voltage, or max current. There seams to be more than one school of thought on that.
I'll make a current transformer soon, and continue on with the ground line test.

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11820063 times)

x_name41

Re: Kapanadze Cousin - DALLY FREE ENERGY

stivep

Re: Kapanadze Cousin - DALLY FREE ENERGY

soliman

Re: Kapanadze Cousin - DALLY FREE ENERGY

soliman

Re: Kapanadze Cousin - DALLY FREE ENERGY

WhatIsIt

Re: Kapanadze Cousin - DALLY FREE ENERGY

apecore

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

AlienGrey

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

soliman

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY