Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719624 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21255 on: May 21, 2019, 04:15:51 PM »
Thanks, Gyuasun thanks for the information I'm sure your help will be greatly appreciated by all.

AG

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21256 on: May 21, 2019, 04:16:27 PM »
Hi Nick,
I suggest to delete the full content of your above post in which you quoted my post, and
then repeat the copy and paste again in the same post, so that the full text should appear only once.
To do this, click on the Modify icon of that post and highlight the total content  and delete it.Then copy and paste again my text from the other thread.

Gyula

   Corrections have been made, Gyula. Thanks for your help.

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21257 on: May 21, 2019, 04:21:56 PM »

AlienGrey:  Well, my measuring suggestion may or may not be useful for the end result...
                  Do you know why the 90° phase shift is needed there?   8)   

Nick: okay you are welcome.

Gyula

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21258 on: May 21, 2019, 05:23:54 PM »
Not personly no but Wesley and another guy well back in this thread mentioned a colossal gain and later 'Chris over unity junkie' also mentions these phenomena, and the circuit's 4-5 turn winding shows that type of circuit.

If anyone else wants to try this test feel free as I'm certainly 'NOT' claiming any credibility for originality here. 8) 8) 8)

AG

thanks again.


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21259 on: May 21, 2019, 05:34:50 PM »
   Should we go by what other guys have said about the phase shift? Guys that have never built a self runner of this type.   Stalker normally provides the best concise and complete directions on his videos. I have not seen anything about a phase shift.
Nor from Ruslan, Akula, Adrian, etz...

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21260 on: May 21, 2019, 05:35:16 PM »
   The above answer from Gyula may be the reason that I've never seen any type of phase shift.   
   Who says that a phase shift is what's called for, anyway?

   You have to take into account what the feedback circuit is also going to do to all that fine-tuning, once you incorporate the looping feedback circuit. Things will change, and yes, the scope probes connections DO affect the overall tuning and output at the bulbs. I have shown that effect in one of my videos. That is why it's so hard to actually get this contraption tuned right. All circuits need to be connected up to tune this device properly, including the feedback part. And also remember that placing different wattage bulbs can also affect the tuning.
I'm not using the feedback circuit I'm just using the basic test circuit and not the whole device, no Katcher or avc or agc ect so please ignore that part at this stage of testing. AG

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21261 on: May 21, 2019, 05:40:45 PM »
  You can ignore it if you want, but I can't, as I'm not just into lighting bulbs, the device is made to self run. That's the point.
And the feed back circuit will take a lot of the gain from the circuit, and it will not have much left to run itself.
  Wait till you try to get the thing to self run... all your tuning will go out the window.
  The induction circuit works fine as is, it does what it was designed to do. It's the interaction with the Kacher, that is not up to par.
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21262 on: May 21, 2019, 06:02:37 PM »
Maybe Nick but if the 90 deg phase shift yields no gain anything else would be pointless.

AG

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21263 on: May 21, 2019, 06:24:08 PM »
   It may be that it's the phase change that is useless and pointless. That information is unconfirmed, at best.
   In any case, try to make it change phases, and let us know how it goes.
   Extra energy does not come from phase changes in the induction circuits. So, it would be good if you can prove that idea, one way or the other. As I see it, it comes from the interaction of the two different circuits. The induction circuits by themselves will not provide for any extra, or improved output. Try it and see.

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21264 on: May 22, 2019, 06:01:52 AM »
Hi all,

It has been quite a while and want to share something of value here.
The presented pic will show many things and differences about the same device which
we all are trying to replicate. It raises many questions yet connects alot of pieces of the puzzle now.
I managed to get this from somewhere some months ago and has very interesting information
on it.
File size is big but try to zoom in as much as can to view everything and to read.

https://www.filesend.jp/l/en-US/lUKiw3

Better downloading it for bette resolution but here is direct image which I uploaded
by clicking on it will zoom in on it but to close so that is why downloading it will make it easier
to size it while zooming. but here goes

https://static.atonline.net/private/tYge9P4nYV51NNp_q3QYfJaDcecscFcf7y33BOIdYd-UBo_w-STryy_hzwxHMCnu/The%20Anonymous%20Copy%201.jpg



My first observations, and give opinion on it;

*The orange wire connecting to negative rail of kacher to pushpull section, take a good look ;) what is it for.
*See kacher transistor gate connected to tesla secondary to ground and connected to the 3T after the cap
  also to same ground... well well, never did such a connection befor with kacher.
   interesting right?
*Look at the receiver how it is wound (grenade), I personally have not done it this way befor,
   but one thing I know is that it will generate a lot of voltage.
*and if you see his calculations... 17th Harmonic from telsa coil to pushpull freq.?? hmmmm
*It says in the some of the texts, load must be connected only after diode bridge not befor.ect...

So much to see yet it would be great if someone translates it completely one day.

Current Accelerator is where it will lead too.

This is valuable info and must be studied carefully.

Alright till here guyz,

Cheerz~


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21265 on: May 22, 2019, 01:17:04 PM »
Geo hi there' Orange? it's coming up mustard on mine  :D it's the phase shift winding and its buddy in front is a wave shaper modulator probably 50 hhz or 60 depending on where you exist on this globe any way thanks it's nice to see how it all should be done, it's all a permanent learning curve. I need to get out more Nick is slowly picking it up as it gets more complicated.
I like this one, ' *It says in the some of the texts, the load must be connected only after diode bridge, not befor.ect.'  ;D

AG

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21266 on: May 22, 2019, 06:12:09 PM »
Somebody lately posted interesting schematic , possibly about Kapanadze device with a diode bridge on secondary side connected to primary side. If you know what I'm talking about please repost it !

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21267 on: May 22, 2019, 06:47:05 PM »
   Geo:   Good to see you posting again. I looked at the schematic that you uploaded a link to, but, it's too complicated for me to figure out, and try to incorporate into my device.

   I been trying to tune my device by changing the C1 and C2 cap values. But, funny thing, that although the frequency does not change by much at all using different caps, the output can really be changed and improved, by a lot.
   The first step for us would be to get the feed back circuit working to at least run itself and powers the device, with no load on. Then try to see to what point it can be taken after that. That is why those little caps (C1 and C2), and choosing the proper caps is very very important, otherwise you won't get enough amperage to self run. But, the funny thing is, that they don't change my running frequency hardly at all, It's as if my device locks onto certain frequencies, and won't change, or resists any change.
   Although those caps are very important, yet I don't have any more of the 1000v to 2000v WIMA caps, which can make a big difference. So I've just been using the brown MKK types like you were also using. As they do work, although not as well as the wima caps.   I have my device running now, so I've been continuing with the tests.
But, it seams that my 7ah 12v batteries don't last more than a year, here for me. So, I have another one of the two batteries, that is about to bite the dust. And they are not so cheap, to keep having to replace them. And, I've had to replace several of those batteries, as well a the 24v PS. This is not a cheap project to invest in...   
   So, I want to make the simplest working version of the device that I can. But, I don't like batteries...at all. As they all fail, in too short a time, as well as the cheapo PS.                                                                 NickZ
   

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21268 on: May 22, 2019, 07:54:20 PM »

On the schematic Geo uploaded there are 4 main differencies from the rest of circuits:


1) The "katcher" circuit - instead of having complex on/off switching the power supply of circuit is simply going on/off on needed moment. And the power transistor is MOSFET instead of bipolar. Which is going straight to the ground on the gate instead of secondary coil going to the transistor to the ground.
2) The way whole coils are placed. On the picture they ALL have windings onto same direction with new layer beginning from same place as previous. And the top 4 layers are equal length + they are another half length with long coils in total.
3) The connection between Tesla coil is involving capacitor in series. Which makes perfect sense for stepping up voltage in series resonance.
4) The all parts of circuit (push-pull/on-off cycle of Tesla/output of grenade coil with capacitor in paralel) are calculated to resonate on same frequency. This includes Tesla coil which is also resonating on 17th harmonics upwards for that frequency.


So here goes nothing.... :)


Cheers!

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21269 on: May 22, 2019, 08:40:20 PM »
But, it seams that my 7ah 12v batteries don't last more than a year, here for me. So, I have another one of the two batteries, that is about to bite the dust. And they are not so cheap, to keep having to replace them. And, I've had to replace several of those batteries, as well a the 24v PS. This is not a cheap project to invest in...   
   So, I want to make the simplest working version of the device that I can. But, I don't like batteries...at all. As they all fail, in too short a time, as well as the cheapo PS.                                                                 NickZ
 
Nick,
I warned you way back that those small slabs have insufficient capacity for the experimenting you are doing. They need to be re-charged using a proper SLA battery charger before the terminal voltage drops below around 11.5V on load, otherwise damage to the battery can result over time. A couple of car batteries would be more suitable.