Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719318 times)

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21120 on: May 10, 2019, 01:23:32 AM »
what do you call a square wave one MOSFET overheating the other cold  ;D ;D
50/50 is a square wave. see scope shot.  2674

https://www.electronicspoint.com/forums/threads/pll-un-equal-square-wave.59160/

AG,

I don t get you anymore...
First you say a CD4046 doesn't give a squarewave..

Now you talking about 50/50 one mosfet???

I can tell you i have no problem with running my DRSSTC with a 74HC4046 in PLL mode...  even with interupterpulsing for only 2 or three cycles @ 2.0mHz
It works all fine and gets in LOCK in a blink of a eye

Greetings

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21121 on: May 10, 2019, 01:44:47 AM »
   I think that AG is talking in a new code. Payamas, money, cut the cake, and get more back than when you started.
   Everything is in code now. TopRuslan secret code. And Ruslan won't say... So, who's going to crack the code? AG?

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21122 on: May 10, 2019, 09:45:25 AM »
Well here is a Vero card with a CD4046 test rig(no different from a 74HC low voltage version) in the output waveform now look at the waveform you call that a stable square wave ?????????????
So what might happen if you start to process this signal in the 'real world' ?

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21123 on: May 10, 2019, 10:55:06 AM »
AG,

Yes you using the CD version....
See my scope_shot @ 5 Mhz +.

Greetings


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21124 on: May 10, 2019, 11:20:18 AM »
Tried it originally with 74HC4046 so did Itsu it was exactly the same made a PCB for it too.
The circuit also has other problems that have not been resolved and errors regarding feedback to the LM393
to the phase, lock is only a phase shift controller that doesn't work as is! to correct it would require another 4046
It's to do with the chip works it pulls the wave one way or the other, it needs a latch to stabilise the wave on a rising edge.
Where you show it in the middle, nice one till it does real work.
« Last Edit: May 10, 2019, 05:53:53 PM by AlienGrey »

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21125 on: May 10, 2019, 11:43:11 AM »
Tried it originally with 74HC4046 so did Itsu it was exactly the same made a PCB for it too.
The circuit also has other problems that have not been resolved and errors regarding feedback to the LM393
to the phase, lock is only a phase shift controller that doesn't work as is! to correct it would require another 4046
It's to do with the chip works it pulls the wave one way or the other, it needs a latch to stabilise the wave on a rising edge.
Where you shows it in the middle, nice one till it does real work.

You are correct about the working of the PLL.
There are many ways to accomplish how to control the phase automatically.

Maybe i will make a short vid in the near future how my kacher interupter is working with PLL in a DRSSTC setup.


Greetings

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21126 on: May 10, 2019, 05:24:43 PM »
Here is a device Nelson Rocher designed  I'm fiddling with, I did originally I had a coil twice the size
but I'm not sure it makes much difference  :D it draws 15volt logic power internally, with a 12-volt input of 220ma with no load.

Before someone screams it's off topic but is it really ?



« Last Edit: May 10, 2019, 11:06:39 PM by AlienGrey »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21127 on: May 10, 2019, 05:25:35 PM »
You are correct about the working of the PLL.
There are many ways to accomplish how to control the phase automatically.

Maybe i will make a short vid in the near future how my kacher interupter is working with PLL in a DRSSTC setup.


Greetings

   apecore:
   Perhaps on your near future video you can also show the difference that the interuptor kacher circuit can make, at the output bulbs. Especially while using a 300 to 500w load of bulbs, at the same time the inductor is on, then just turn the Kacher off, but leaving the induction circuit still on.  As that will show the effectiveness of the sync and it's interaction, between the controlable Kacher, and the induction circuit's operation.
   Many times the Kacher's interaction will show an improvement at the output when using a smaller load (100w), but not a higher loads, (above 500w). Which is what has been my results, and which normally proves (at least to me) that the sync is not right on the money. That is what I'm working on to correct, if possible.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21128 on: May 10, 2019, 05:31:19 PM »
Just a bit of refreshing memory - in https://img0.liveinternet.ru/images/attach/c/6/91/684/91684490_large_100_6334.JPG and https://img1.liveinternet.ru/images/attach/c/6/91/684/91684491_large_100_6335.JPG Dally did not have katcher nor fancy PLLs. Only narrow pulse was going into coax cable between 2 windings and still making same power amplification result.
So what everyone is missing?


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21129 on: May 10, 2019, 05:42:13 PM »
  T-1000:   In my humble opinion... If the Kacher secondary coil does not free run at the exact proper frequency to begin with, the controllable kacher circuit will NOT make up for it, by readjusting the off frequency to the correct match. No matter how you turn the trim pots. The results are little to no gain, or just a small gain, but still no OU, nor the ability to self run. And showing NO GAIN above 500 plus watts loads. I think that may be where we are all stuck at. Trying to compensate for an improper match, to begin with.  We need to know the exact wire sizes of all the coils, and adjust the Kacher secondary to resonate at the right frequency. 
   It has also been shown by several guys, Ruslan, Stalker, Adrian, etz...how the simple Kacher circuit is used on self runners, as well. So, the secret is not in the PLL, which may be locking onto an off match.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21130 on: May 10, 2019, 05:55:33 PM »
I think that may be where we are all stuck at. Trying to compensate for an improper match, to begin with.
Or put little coil around ground cable + scope and start spiking grenade all way up until it will start showing most current going to/from the ground...
P.S> The SWR meter probably would be good indicator there as well.


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21131 on: May 10, 2019, 06:01:14 PM »
  T-1000:   In my humble opinion... If the Kacher secondary coil does not free run at the exact proper frequency to begin with, the controllable Kacher circuit will NOT make up for it, by readjusting the off frequency to the correct match. No matter how you turn the trim pots. The results are little to no gain or just a small gain, but still no OU, nor the ability to self run. And showing NO GAIN above 500 plus watts loads. I think that may be where we are all stuck at. Trying to compensate for an improper match, to begin with.  We need to know the exact wire sizes of all the coils.
if your Katcher is generating AC how does it do anything static electricity is not ac Ruslan uses an inverted LOPT coil and spark plug in his video it's all designed to not work.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21132 on: May 10, 2019, 06:03:27 PM »
Just a bit of refreshing memory - in https://img0.liveinternet.ru/images/attach/c/6/91/684/91684490_large_100_6334.JPG and https://img1.liveinternet.ru/images/attach/c/6/91/684/91684491_large_100_6335.JPG Dally did not have katcher nor fancy PLLs. Only narrow pulse was going into coax cable between 2 windings and still making same power amplification result.
So what everyone is missing?

T-1000,

Good observation.
Unipolair pulsing... thats the key i guess.....

Our current kacher systems only transmit some energy to the grenade/ inductor at this moment,..  either it is a a kacher without or with interrupter
When we can create unpolair pulses.. . either with Dally system or with tesla system it will be Bahama time..

So this makes me come back to the latest vid from Ruslan k,..  his system does not Lock on kacher frequenty.. or have any fancy electronics to create the unipolair pulsing... (if somebody thinks otherwise.... please give a reply)
Does this means that resonance at the kacher system is not important?......  is he using only his 4046 for fixed frequenty pulsing?
If this is true only standing wave matters related to wire length

With respect to the statements from older related Ruslan vids the next items do come to the surface everytime....

Disruptive and Ground eating...  these two items only go together when the puls is unipolair.

Greetings

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21133 on: May 10, 2019, 06:08:19 PM »
Or put little coil around ground cable + scope and start spiking grenade all way up until it will start showing most current going to/from the ground...
P.S> The SWR meter probably would be good indicator there as well.


very good suggestion..

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21134 on: May 10, 2019, 06:31:13 PM »
   Guys:
   I would like to see a test showing any real power at all, coming from the ground line. As I doubt it. Going to the ground, yes.    Nor do I see any unipolar pulses, on any of the self running videos. If so, please post a link to it, showing how that looks on a scope. As all I've ever seen anywhere are sine waves coming off of the HV circuit, at the antenna coil. So, please show otherwise, if possible.
   Akula has shown that even without a ground line his second self runner would still run, although not as well, with some overheating. So in that case there is NO power is coming from the ground. So, where does it come from? 
The surrounding ambient, perhaps, as Tesla has stated. I doubt that he would have talked about tapping "free electrons", but mentioned the Aether, instead. Maybe there is more to this, than just ionizing the air, and catching free electrons.
   PS. Itsu, good to see you still checking in on us.