Free Energy | searching for free energy and discussing free energy

http://jnaudin.free.fr/kapagen/kapagen33pio.htm
It is a bad measurement method  !A halogen bulb is mostly used as heater part :  but no calori-output measured.
 like here "Test # 3" http://jnaudin.free.fr/gegene/indexen.htm

From in-/ output comparison this tests and result means : Also not with a KAPAGEN the halogen bulb can concurr counter f.e. LED with 150/200( Phillips)/300( Cree) lumen/Watt lightning devices !

Tests with KAPAGEN : ( 2505 lumen x 14 lamps) / 1059 W active power ~  33 lumen/ Watt (~ CFL efficiency)

Really not by using this " energy saver" ? Caution, for right physical measurement : CFF
https://patents.google.com/patent/US5130608A/en
          apparent lumen/ Watt ?

CFF and pulsed radiant energy : probably for 99% " free energy devices with bulb demonstration" the fiasko. ! 

                                                                SELF-DECEPTION

http://jnaudin.free.fr/kapagen/kapagen33pio.htm
Naudin compared the brightness of a light bulb from kapagen and the brightness of a light bulb switched on ordinary from the power supply network.He did this experiment correctly.
The amount of heat does not matter, since with the same brightness the same amount of heat is obtained.
In this experiment, the Earth itself and the grounding is used as a wire in an electrical circuit. Nothing unusual. Predictable result.

http://jnaudin.free.fr/kapagen/kapagen33pio.htm
Naudin compared the brightness of a light bulb from kapagen and the brightness of a light bulb switched on ordinary from the power supply network.He did this experiment correctly.
The amount of heat does not matter, since with the same brightness the same amount of heat is obtained.
In this experiment, the Earth itself and the grounding is used as a wire in an electrical circuit. Nothing unusual. Predictable result.

Brightness means under " duty cycle"- conditioning not much !  https://en.m.wikipedia.org/wiki/Stroboscope
http://www.gerardmaas.net/techniques/stroboscopic-flash/stroboscopic-flash-are-you-on-the-right-frequency
                               
                                                 KAPAGEN INPUT AND OUTPUT POWER :
       power from halogen bulb as indicator means heat and light = total output/ total electric input
 Only light/ brightness related we would have to declare the Cree LED for 800% more efficient than the KAPAGEN,
                                                                  what physically is not true/ correct measured !   
                                       Each appropriate device his appropriate function and appropriate use !

             Input/Output-power measuring could sometimes become very complex   
                                 http://www.rexresearch.com/tewari/tewari.htm   

Do you understand the design and principle of operation of a halogen lamp?  Naudin use for Kapagen halogen lamp, not LED.

 It consists of a filament from massive metal spiral. The filament heats up relatively slowly and slowly cools. To this halogen lamp does not apply these:  "Brightness means under" duty cycle ""
It is not possible. This lamp turns on and off very slowly.

https://en.wikipedia.org/wiki/Halogen_lamp

Come on Sergh that's not going to work like that it will just average out even if your peak voltage and current
was raised it still averages out in the real world, the energy needs to come from somewhere.

Do you understand the design and principle of operation of a halogen lamp?  Naudin use for Kapagen halogen lamp, not LED.

 It consists of a filament from massive metal spiral. The filament heats up relatively slowly and slowly cools. To this halogen lamp does not apply these:  "Brightness means under" duty cycle ""
It is not possible. This lamp turns on and off very slowly.

https://en.wikipedia.org/wiki/Halogen_lamp

I  do not know what you understand as " relatively slowly", from pulses/signals per second and temperature view.I used the LED ( cold light source)  for lumen/Watt comparison/ relation part.

Better for Lux-meter efficiency measure : lm/Watt and lx/Watt

https://en.m.wikipedia.org/wiki/Metal-halide_lamp
What do you want to declare " is not possible" ?
Like in great : a tank circuit https://en.m.wikipedia.org/wiki/Electrical_ballast
with standby  and switch on = consume/ charge and switch off = no consume/charge.
Between AC and DC in use is a difference, between W and VA is a difference .

How can/ should be pulse power calculated,  taking an off-grid source lika a capacitor- or battery-bank with recharge circuit :
http://rexresearch.com/kanarev2/kanarevpulsemtr.htm
As " on grid" consumer this all does not interest, but as " off grid" experimenter each pulse phase and pulse average/peak duration and total each pulse input power calculation is essential for comparison and improvements !
                  http://rexresearch.com/kanarev2/kanarevpulsemtr.htm#pulsepower       

                          15 KW ~ 144 W or standpoint view change 144 W ~ 15 KW,         

                           but he does not declare : 144 W = 15 KW or vice-versa

And really, I have got nothing against Naudin, very entertaining his trials,demonstrations and results and links.

Wow,  Sergh, I am impressed !                 ~/= : up to 100/1 ratio             


                                " physiologically " : soft facts area , could be or not could be         
                                      wristify,EMBR lab : low input / great output " feelings"
                                                          https://embrlabs.com/
                Our body has receptors, but the sensivity is between the several bodies not the same                         

                                 Genetical,habit ( for an Inuit 0° C is relatvely " spring " ambient) :         

                         climate-chamber ( - 100 ° Celsius ) and thermografic camera body controle
                             

                                                      Science wants hard facts !                                           
                                                           Repeat-/ controle-ability     
                Not : " it seems that ..... !"( from physics to physio- to psycho to  PSI to mental insanity )

                                                                Physiologically :
   a 20 sqm room equipped with 1600 W heater before, later 400 W heater ( Leo Peron)    and finally   40 W heat foils ( Dr. Helmut Reichelt, IR room object heating) to 12 W electric body wear                       

                                         Also : 100/1 Wattpeak/ Wattdeep ratio
                    Haus-/House-Raum/room or Weltraum/"Space" or body climatization

Your criticism and the KAPAGEN tests result : 34 Lumen/ Watt ~ CFL efficiency , does this result and method satisfy you ?
What was Naudins' target and what is your experimental result target. ?


You can have the world best hardware, 
           
                        but have you also the best " software" and the before/after-vision target/ intention ?       

   
                       Let us beginning with :  halogen lamp lightning efficiency  ( without controller)

https://www.any-lamp.com/lumen-to-watt  in average 10 lumen/ Watt
Definition and relationship :
 lux and lumen and Watt and VA and Photon and Phonon and Electron

https://en.m.wikipedia.org/wiki/Heat_transfer_physics

https://www.any-lamp.com/blog/lumen-and-lux/

About " halogen lamps can not flash fast"  http://www.electronics-lab.com/project/pwm-halogen-lamp-dimmer/
              PWM IS FLASHING : energy flashing
And cause the "transformer" in future will become printed :             

                              energy transformer: energy prozessor- equivalence
we can transform the termination circuit signals/ pulses per second now to flops per second : 
https://en.m.wikipedia.org/wiki/FLOPS

The GFLOPS and TFLOPS price list from 1961 to today and this translating in printed "ambiental energy harvester"KWp/Wp future prices development and as product : KWh power costs decrease
The thin-foil-printer velocity will in future dictate the world energy market price and the consumer access.

 About concentrated power densities : http://www.rexresearch.com/yater/yater.htm

Jeg, that the movie  ,of course.

You must give some details of your device.
 Do You Know the frequency of your tesla coil?
Did you use a cap in series with  bulbs load? 
Did you use a mosfet or 2SC5200 for Kacher?
You must tune the device, first 900 Khz for Tesla coil.
Did you use battery or PSU?