Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718976 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20865 on: March 16, 2019, 10:34:41 AM »
    AG:  Ya well.... That's what you always seam to think. That these matched frequencies are going to line up perfectly. They don't.
    Can you produce something out of all those good thoughts and ideas that you've read about, that you think is the way to go, but haven't shown anything actually working? So, why don't you try to match those frequencies as you think should be, and show us how well it goes.
     What I'm suggesting has been tested, already, concerning the diodes in the previous post. And, I know what I need to do as a next step in the process. 
     No need for armchair suggestions that have not been tried, first. But, thanks anyway.
   

   BTW: My Kacher has no problem running at 1.5MHz, but it works BEST at around 1MHz, as far as what it does to the induction circuit and its coils, which can be seen at the output of the bulbs.
rewind it with the fishing twine in between layers works in highering the frequency but I always save my old one just encase.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20866 on: March 16, 2019, 10:36:19 AM »
but it looks like the TL494 is used to provide the
lower frequency rectangular waveform, and the transistors are used to gate (AKA chop) that waveform at a much high frequency
in one of the windings of the transformer.

Thanks Void. I'll take a look again having in mind your proposition. Yes Acula is a great engineer and it is difficult to assume how his circuits work even when it comes with simple designs like the above 494 circuit.

 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20867 on: March 16, 2019, 10:39:37 AM »
It's not Akula and does not sound like him, and if you put the guy on trans late he is talking about 'junk' globally gook!

Hi AG. Jeg didn't say that was Akula in that video. He said a "video about acula's 494 circuit". :)

Anyone ever heard anything further about Akula? He seems to have parted ways with that Steho
Energy AG company two or three years ago. Possibly that was because Steho Energy AG helped
Akula to sell/license some of his technology to some rich investor such as maybe one or more of those Chinese
investors that came to see an in-person demo of his various devices. Arthur Trankle also seems to have
moved on to selling some water enhancing devices for a few years now as well. Anyone ever heard
where Akula went to? He had quite an array of impressive looking devices that he demoed, so it seems to me
it should have only been a matter of time before some rich investor or buyer picked up Akula. :)

It appears Akula 'liked' a video on his youtube channel a couple of weeks ago, so he is apparently still around somewhere. :)


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20868 on: March 16, 2019, 10:41:07 AM »
Thanks Void. I'll take a look again having in mind your proposition. Yes Acula is a great engineer and it is difficult to assume how his circuits work even when it comes with simple designs like the above 494 circuit.

Hi Jeg. I had already edited my comment form the previous. I am not sure now. I would
have to spend more time looking at the circuit.


Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20869 on: March 16, 2019, 11:06:51 AM »
Hi Jeg. I had already edited my comment form the previous. I am not sure now. I would
have to spend more time looking at the circuit.

No worries mate! ;) 
I just asked because this waveform surprised me. It is what we need for playing with Acula's solid state circuits.

AG thanks for your opinion. But sometimes between the rubbish someone can find a treasure :)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20870 on: March 16, 2019, 12:43:37 PM »
Jeg I had a problem with trying to synchronize Sergeys 1.5mhz Katcha with 15khz grenade inductor  circuit
one way to do it with logic is use a 3mhz divide by 2 for Katcher and for grenade divide the 3mhz by 10 and 10
=30 kHz then divide by 2 for 50/50 then inject it into a 494 to produce push-pull, then everything is locked to the 3mhz VFO note a bit of other logic might be needed for gating but simple to do.
A bit like your waveform you were asking about.

Note in the Sergey circuit I included a current limit circuit so as not to kill the Katcher driver and output transistor too quick

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20871 on: March 16, 2019, 02:08:17 PM »
rewind it with the fishing twine in between layers works in highering the frequency but I always save my old one just encase.

   I've already have done that a couple of years or so ago.
   The purpose of the fishing line is to be able to have more capacitance when using a shorter secondary coil for the Kacher.
Although that part of it does work, there is no need to do that when the 1 to 2MHz can be reached by the normal secondary windings. It's used by guys that want to be able to reach something like 3MHz or higher, but find that their Kacher has only a tiny output at that frequency when using the normally wound (shorter) secondary coil. So, the fishing line is used, but it's not really needed, at all. Nor has it been used by Akula, Ruslan, nor Stalker. 
   AG, again, why don't you try your suggestions, first, and show how well it works to produce a self runner before handing out advice.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20872 on: March 16, 2019, 02:21:45 PM »
   What we know about Akula is that he like Ruslan and Stalker, they are not going to show any more self runners on video.
   Stalker shows how to make the circuits, but not how well they self run. As that is the dangerous part of any demonstration.   Ruslan shows his newer already built systems self running, but not how they are made and connected up, nor the schematics.    Stalker shows how to build his circuits with full schematics or diagrams, but, not how well they worked to self run.      And finally, Akula is MIA.  Nor has he shown any brand new Mercedes parked in his drive way.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20873 on: March 16, 2019, 02:48:42 PM »
Ha Ha are you trying to get me bumped off  ;D ;D you already explained why!

https://www.youtube.com/watch?time_continue=27&v=4iKDvfZzFt8

I don't understand the higher capacitance increase with the fishing wire bit you got I get the opposite effect in fact
with a 10m Katcher, I got over 5mhz with 1mm wire lowering the wire diameter reduces the frequency and at the same time
with that short length, you won't find it at all easy getting it to self oscillate without other means of gain or direct drive from
my experiments so how did Adrian Gustove get such huge sparks with his setup?

Nick, you know your self this game is full of pitfalls and missing vital information so just stick with it and see how things go.

A Katcher tunned to 1.5mhz with caps making up a tank circuit
« Last Edit: March 16, 2019, 04:56:35 PM by AlienGrey »

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20874 on: March 16, 2019, 02:49:36 PM »
AG
Yes locking frequencies is a more professional approach. It is just that when someone sees devices like Roma's or Maxim's, wonders about the necessity of such complex arrangements especially when still the basic idea is not well established. But your build for sure will help you a lot when everything will be in the right order. ;)

Nick
It is the other way around. With fishing line we reduce inter capacity when it needs for the right tuning. I think magpwr before few years, mentioned that the PVC tubes add more capacity to the coil than what we think and the net result is that we are not able to tune by just calculating wire length.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20875 on: March 16, 2019, 03:32:27 PM »
It is what we need for playing with Acula's solid state circuits.

Hi Jeg. Why do you think that?


And finally, Akula is MIA.  Nor has he shown any brand new Mercedes parked in his drive way.

As I mentioned above, Akula 'liked' a video on his youtube channel a couple of weeks ago,
so apparently he is out there somewhere. :) Whether he has made any business deals in regards
to his devices really isn't dependent on him showing a brand new Mercedes in his driveway. ;)
If his devices have proven to be too unstable, then that might be a problem for him.
I have to wonder if at least some of his claimed LED driver self runners were just powering from nearby cell towers
or similar, however. It doesn't take all that much power to power up a few LEDs, but I would assume Akula would have
tested for that possibility to try to rule that out. ;)


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20876 on: March 16, 2019, 03:51:25 PM »
Hi Jeg. Why do you think that?


As I mentioned above, Akula 'liked' a video on his youtube channel a couple of weeks ago,
so apparently, he is out there somewhere. :) Whether he has made any business deals in regards to his devices really isn't dependent on him showing a brand new Mercedes in his driveway. ;)
If his devices have proven to be too unstable, then that might be a problem for him.
I have to wonder if at least some of his claimed LED driver self-runners were just powering from nearby cell towers or similar, however. It doesn't take all that much power to power up a few LEDs, but I would assume Akula would have tested for that possibility to try to rule that out. ;)
Have you forget the quarter wave that Wesley referred to and various guys displayed and used etc has anyone thought of experimenting with that idea to see if it works

A vfo cd4046 driving a dual cd4013 and some LEDs ?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20877 on: March 16, 2019, 04:17:13 PM »
Hi Jeg. Why do you think that?

Because we need high frequency resonance don't we? Acula has already stated, that all of his devices are based on the same effect and method to reproduce it. So it is safe to assume that in his above system with just one switch there has to be a way to produce both the high and low frequency together. Just saying.. :)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20878 on: March 16, 2019, 04:26:04 PM »
Void check this out. The man of the channel answers on how to get this signal. Can you understand completely what he says?

Высокочастотный сигнал генерит ТЛ494. Паузы между ними делают усилители ошибки по параметру степени насыщения феррита. По сути тут два генератора первый на внутреннем генераторе 494, а второй параметрический зависящей от силы тока протекающего через L1 снимаемый на шунте R1.

In his video he makes a new connection to pin No.16 which is one of the two error amplifiers. But wire isn't coming from R1 as he states but from the output instead. Perhaps there are more on this but it is in Russian.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #20879 on: March 16, 2019, 04:34:33 PM »
A G. , an advice on the Russian forums, uses only the harmonics multiples of 3, that is 30th, 60th, 90th, in your case may be 90th.
 
I have two more pictures taken from the forums, I do not remember which forum,
these pictures reveal the secret of how to tune Ruslan devices.
I found these pictures yesterday on my computer but they were two years old.

Thanks Conico,

I believe this is very good information it fits in the M.O. as i am currently aware of.
If you have more topics to share from these Russian forums i recommend it strongly.


Best regards