Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715612 times)

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19695 on: May 02, 2018, 03:49:38 PM »
It is just how the deal us done.

When you but car without checking it... it also is possible it breakdown within 5 miles.

So in case of OU systems...i would prefer the " no cure no pay"  rule.
Any other way is mostly responsibility buyer.

Saying this i would challenge everyone having a OU system delivering more then 2.5kW for 5000USD.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19696 on: May 02, 2018, 06:18:48 PM »
  Well... I think that device may be missing the banana, before the laptop adapter. It's been shown to work that way by others.  But, I won't go that route, until the road is clear.

This self-runner has the banana!


Belfior

  • Hero Member
  • *****
  • Posts: 534
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19697 on: May 02, 2018, 06:26:34 PM »
This self-runner has the banana!

I knew it had to be something simple! Have to swap my oranges to bananas :(

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19698 on: May 02, 2018, 07:50:05 PM »
  I tried the  banana,  didn't work for me.  Maybe,  it has apeal, and I did peal it. Should of eaten it,  instead.
Perhaps,  I'll try a potato next,  as they are shown to be able to light bulbs.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19699 on: May 02, 2018, 08:18:20 PM »
Strewth this thread reminds me of the Muppet show the two old guys at the end Statler and waldorf !  ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19700 on: May 03, 2018, 03:27:02 AM »
   Well, we may be puppets, at that, you never know...

   Hoppy:  Do you think that a TVS varistor such as a 115v one, (with max surge voltage 150v) would help at the input of the feed back PS, to keep it from doing what it did before? As the overvoltage protection circuit that my PS comes with, did not avoid the last blow out. So, I'm kinda worried that it could do so, again.   And bang,  cap juice everywhere.

   I've been working on the tuning and syncronization of both Kacher and the induction circuits, to see if I can find the right way to image both of them at the same time, real life, on the scope.
But,  I don't think that it's really possible, since there is way too much difference in frequencies between both circuits. To be able see both reading, up close, and at the SAME time. In order to try to match them up, somehow.
   So, I have been testing and tuning to Itsu's advice and suggestions, and trying to tune both circuits to obtain a steady wave form, on both channels. Not easy to do on the free flotting Kacher output signal. As it is hitting and peaking on the induction circuit, many many time, for each pulse of the 3 turns coil LC circuit's pulse peaks. So, maybe some other means are needed.
Perhaps Itsu's suggestion may work, but, again it's not as easy as it sounds. If the frequencies aren't close to being where they need to be, the scope signal won't be steady, at all. So, impossible to match them up, as I was hoping to do.
Live and learn,  I still have a lot of learning to do.
 
  Anyways, I'm just trying to keep the feed-back PS from going up in smoke, for now. As the no load output voltage from the grenade's rectifier, that feeds the PS, can reach over 250 to 300 plus volts.
And it's only a 120v, 250w PS. And I'm using 120v bulbs, which I've already blown out a few of them, as I had mentioned previously.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19701 on: May 03, 2018, 07:05:19 AM »
   Well, we may be puppets, at that, you never know...

   Hoppy:  Do you think that a TVS varistor such as a 115v one, (with max surge voltage 150v) would help at the input of the feed back PS, to keep it from doing what it did before? As the overvoltage protection circuit that my PS comes with, did not avoid the last blow out. So, I'm kinda worried that it could do so, again.   And bang,  cap juice everywhere.

   I've been working on the tuning and syncronization of both Kacher and the induction circuits, to see if I can find the right way to image both of them at the same time, real life, on the scope.
But,  I don't think that it's really possible, since there is way too much difference in frequencies between both circuits. To be able see both reading, up close, and at the SAME time. In order to try to match them up, somehow.
   So, I have been testing and tuning to Itsu's advice and suggestions, and trying to tune both circuits to obtain a steady wave form, on both channels. Not easy to do on the free flotting Kacher output signal. As it is hitting and peaking on the induction circuit, many many time, for each pulse of the 3 turns coil LC circuit's pulse peaks. So, maybe some other means are needed.
Perhaps Itsu's suggestion may work, but, again it's not as easy as it sounds. If the frequencies aren't close to being where they need to be, the scope signal won't be steady, at all. So, impossible to match them up, as I was hoping to do.
Live and learn,  I still have a lot of learning to do.
 
  Anyways, I'm just trying to keep the feed-back PS from going up in smoke, for now. As the no load output voltage from the grenade's rectifier, that feeds the PS, can reach over 250 to 300 plus volts.
And it's only a 120v, 250w PS. And I'm using 120v bulbs, which I've already blown out a few of them, as I had mentioned previously.
Nick and others Hi! What are you trying to do ?  A sine wave works with Peek Voltage being in phase with Peek Amps so it's in phase!
So why have you got your Katcher running all the time (your trying to emulate a spark dump? You only need it on at peek Amps that's a narrow pulse. Go on the way you are and you wont get any where.

You might think I came over in the banana boat but I have been in this game years!

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19702 on: May 03, 2018, 10:13:01 AM »
   Well, we may be puppets, at that, you never know...

   Hoppy:  Do you think that a TVS varistor such as a 115v one, (with max surge voltage 150v) would help at the input of the feed back PS, to keep it from doing what it did before? As the overvoltage protection circuit that my PS comes with, did not avoid the last blow out. So, I'm kinda worried that it could do so, again.   And bang,  cap juice everywhere.


You could try a TVS diode such as the 1.5KE180 or 1.5KE200 which has a break-down voltage (vBR) that is safely within the voltage rating of your caps. However, if the over voltage is more than a short surge and prolonged, the diode may burn out.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19703 on: May 03, 2018, 10:36:18 AM »
 
   So, I have been testing and tuning to Itsu's advice and suggestions, and trying to tune both circuits to obtain a steady wave form, on both channels. Not easy to do on the free flotting Kacher output signal. As it is hitting and peaking on the induction circuit, many many time, for each pulse of the 3 turns coil LC circuit's pulse peaks. So, maybe some other means are needed.


You need the fully adjustable pulsed Kacher circuit to achieve the waveforms you need to see. This was explained to you many posts ago.

I question the need to harmonically synch the Kacher frequency with the grenade inductor frequency. My understanding of the theoretical requirement, is to produce a sharp pulse of HV (HV Kacher wave in pulse envelope) that 'shocks' the inductors resonant sinusoidal waveform at around its peak value.
« Last Edit: May 03, 2018, 12:48:57 PM by Hoppy »

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19704 on: May 03, 2018, 01:06:20 PM »
Hi don't want to be a major critic on here but isn't a car ignition coil a bit slow, but might be ok at Schumann resonance freq   ;D

I just spent a good part of the day testing a driven Katcher (Tesla coil) and finding its resonance (rough experiments) some where around the 16 to 27 khz
nothing solid yet, the thing is the katcher driver needs a narrow squared up fast pulse a fraction of the push pull width, (not a spear shape  ;D ;D)
I have managed to do it with a 74HC132 driving a Video driver transistor  'a rarity these days'. With excellent results


AG,
I agree on your comment about the car ignition coil, as running it on 50 - 200hz would be nice also.
But i would need very large inductor series caps...

About your second explanation using a tesla coil...  i do not understand what you dit with it....  you used it instead of the ignition coil?
Could you explain a bit more?

Greetings

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19705 on: May 03, 2018, 01:34:16 PM »
AG,
I agree on your comment about the car ignition coil, as running it on 50 - 200hz would be nice also.
But i would need very large inductor series caps...

About your second explanation using a tesla coil...  i do not understand what you dit with it....  you used it instead of the ignition coil?
Could you explain a bit more?

Greetings
Hi Mr Apcore Tesla coil what do you mean what did I do with it  ;D do you mean trigger it with wave shape turn on and off
 at correct time with a supper high speed high current driver and GA mos fet ?

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19706 on: May 03, 2018, 01:57:30 PM »
Hi Mr Apcore Tesla coil what do you mean what did I do with it  ;D do you mean trigger it with wave shape turn on and off
 at correct time with a supper high speed high current driver and GA mos fet ?

Mr AG,

I don t know what you are doing al day long?
I hope you are not smoking weed all day...but i think you are the only one who can tell me what you did woth the tesla coil?
If i knew it i would not question about it.

Greetings

Ps smoking weed is not legal where you live.. or does it?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19707 on: May 03, 2018, 02:49:56 PM »
   Hoppy:
   I don't believe that even with a controllable Kacher circuit, I will be able to see the wave forms the way that Stalker has shown it, below.  As there is only one horizontal control on the scope. So, it may not be possible to see both wave forms at the same time, such as is being shown, as Itsu has mentioned.
Plus, the two waves are not steady.

   I just wanted to try out Itsu's suggestions. But, trying for a steady signal to sync the device, does not seam to provide much if any additional output therefrom. However, there still may be something to tinker with using that approach.

  I am also looking into the most simplest Kacher circuit controller, but I'm not sure which one to replicate, yet.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19708 on: May 03, 2018, 03:03:05 PM »
   Hoppy:
   I don't believe that even with a controllable Kacher circuit, I will be able to see the wave forms the way that Stalker has shown it, below. Wouldn't they would have running on the  SAME frequency to look like that? And not the way they look in the picture below. As there is only one control on the scope. So, it's not possible to see both wave forms at the same time, such as is being shown. Plus, the two waves are not steady. Anyway, I don't seem to be getting anywhere with this type of tuning. I just wanted to test Itsu's suggestions. But, trying for a steady signal to sync the device, does not provide any additional output.

Nick,

This is all getting a bit tiresome! I'll repeat once more - you need a fully controllable pulsed Kacher driver. The squiggle you see, is the HF Kacher waveform in a pulse envelope. The pulse width is adjustable as needs to be the phase relationship with the inductor waveform, so as to position it relative to the inductor sinusoidal waveform.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19709 on: May 03, 2018, 03:15:42 PM »
Nick,

This is all getting a bit tiresome! I'll repeat once more - you need a fully controllable pulsed Kacher driver.

On that note, what happened to the modded akula katcher driver circuit I shared months ago? Catching up with that only now...?
And sorry about being bluntly straight to the point.