Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718100 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19590 on: April 27, 2018, 06:54:55 PM »
   apecore:
   That was what I was discussing with Geo. As he thinks that he has a DC output from his new Kacher circuit. But, is it really DC? I asked him to show that DC signal on his scope. He never did.
   The ferrite bar intensifies the HV going through it, also, and if I remember right, it raises the Kacher output frequency a bit as well.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19591 on: April 27, 2018, 07:27:03 PM »
Indeed Hoppy,  i do think the same.

Well i'd tried a lot of things,...... but to make the HF/HV kacher wave (even the pulsed version) unipolair is not so easy.
The Antenna is acting as a capacitor and won t let some diodes f.i. eliminate the half wave.

So here some practical advise or options would be welcome to give it a try to.

Have you tried increasing the power of the pulsed wave by using a higher rail voltage on the Kacher circuit? From memory, the Daly circuit showed a 150V rail.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19592 on: April 27, 2018, 07:44:00 PM »
Have you tried increasing the power of the pulsed wave by using a higher rail voltage on the Kacher circuit? From memory, the Daly circuit showed a 150V rail.

Yes,

Tried the 150V rail supply not only kacher configuration,  also PLL half bridge and single MOSFET SSTC .
Puls package in all configs.
Even had some days feeling a bit heated up also :)

The only thing to observe is the transforming of the sinewave from antenna into grenade.....( where also resoance frequenties passed the agenda)

1- Placing fast diodes (UF5408) before ferrite/ and after / at end of antenna.
2- Diodes in combination with isolation cap between ferrite and antenna
3- SG w/ wo diode rectifying from antenna to GROUND

My PC screen flips as all WIFI systems due to the EMP pulses...  but no after stroke as T1000 of ionised air etc.
 I guess  dV/dt  isn't fast enough yet to get the "stroke".....  and not only the voltage level is a mayor parameter.

Also here,..  as a observation from the Ruslan/ Akula devices,...  the Kacher  ( streamer) level isn't the most important item...
There must be some kind of "absorbing "factor from the grenade which katalysis this charging process..

Could be the "stroke"positioning... as you also mentioned.




NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19593 on: April 27, 2018, 09:13:05 PM »
   apecore:
   Could be the right type and size of the earth ground line, also.
   
   Here is the right 2000v 0.15uf wima caps. But, it may take a while to get them delivered.
   2pcs-WIMA MKP10 0.15uF (0,15µF) 2000V 5% PCM:27.5mm Capacitor MKP1U031506F00JSSD | eBay

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19594 on: April 27, 2018, 11:39:07 PM »

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19595 on: April 28, 2018, 09:40:26 AM »
Just watch https://www.youtube.com/watch?v=Hdc9WPM2suA

AG,

I watched it,..... but i cannot make up what it is or not in relation to the Ruslan setup.

I only see a kind of grenade with probally a extra coil on the tube.
I see no kacher or tesla,...  instead i think i see a ingnition coil from a car
i see a spark cap and a big capacitor
i see some elecronics.( to the right- looks like a pushpull circuit) .. which ( as i m not clear) is connected to the bobine
And i see a small board with a TO220 transistor/ mosfet what might causes the spark gap to interrupt

If you have related info please share,..  due it is not very usefull when we don 't know what is going on..
I can post a lot of vids showing all kinds of bulbs get powered on


greetings

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19596 on: April 28, 2018, 11:20:32 AM »
AG,

I watched it,..... but i cannot make up what it is or not in relation to the Ruslan setup.


greetings

This device is using a pulsed TV flyback transformer, microwave cap  to produce HV to flash light the low powered flouro lamp. As with all these videos that purport to show a self-running device with the classic tried and tested 9V battery latching starter circuit  ::) , it cannot be ruled out that a hidden power supply is being used. Therefore, this type of poorly presented demo self-runner claim is of little use to us. Most of us could easily knock-up this demo using a small nicad or lithium hidden battery pack. However, this video from his collection is more interesting and may form the basis of his self-runner if genuine.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19597 on: April 28, 2018, 11:55:51 AM »
This device is using a pulsed TV flyback transformer, microwave cap  to produce HV to flash light the low powered flouro lamp. As with all these videos that purport to show a self-running device with the classic tried and tested 9V battery latching starter circuit  ::) , it cannot be ruled out that a hidden power supply is being used. Therefore, this type of poorly presented demo self-runner claim is of little use to us. Most of us could easily knock-up this demo using a small nicad or lithium hidden battery pack. However, this video from his collection is more interesting and may form the basis of his self-runner if genuine.

I must agree with you on this one regarding the lithium batery..  altough i strongly have a feeling this guy is doing things in the right direction.
As also the attached vid can t be manupilated with hidden battery pack's.

To bad there is no more explanation or subtittle..... due i would asume there is not much of rocket sience to create in a wire going trough the torroids?

Maybe some interesting observation is the Aluminium foil.... there are more claims also made by Ruslan or Akula that Aluminium used as wire (i.e. antenna) in combination with copper.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19598 on: April 28, 2018, 12:49:15 PM »

To bad there is no more explanation or subtittle..... due i would asume there is not much of rocket sience to create in a wire going trough the torroids?


Agreed. Just a single turn 1:! transformer but when inserted into an ali tube inside a grenade coil - similar setup to the Kapagen - then maybe the rocket starts to rock?? :-\

I have a strong hunch that persevering with the Ruslan setup as presented is a waste of time. If I were to resume experimenting, I would introduce some fuel in the form of ferrite.  This is the direction I would tend to work in.


 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19599 on: April 28, 2018, 12:59:22 PM »
The point I was getting at the EHT is DC and not very high in that circuit, he had a few others where he used a Diode Capacitor tripling circuit pulse the capacitor would control the width (peek voltage). but you still need timing for sucking peek current from the ground.


apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19600 on: April 28, 2018, 01:27:09 PM »
Agreed. Just a single turn 1:! transformer but when inserted into an ali tube inside a grenade coil - similar setup to the Kapagen - then maybe the rocket starts to rock?? :-\

I have a strong hunch that persevering with the Ruslan setup as presented is a waste of time. If I were to resume experimenting, I would introduce some fuel in the form of ferrite.  This is the direction I would tend to work in.

Well,..    Hoppy i do understand you are close related to Nick and the many years you team up by now,.....
I do agree the Ruslan device might have a bit to much parameters to be in control for the result.
But i also believe that the key item..  the kacher process and its interupting part in usefull for more related devices also.
About the MRA project,... quit interesting but also a long road to go...

I m still hoping someday some Russian dude will post some usefull stuff with a decent explanation..
After that all balls will start to roll


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19601 on: April 28, 2018, 02:47:13 PM »
  As that last device that Hoppy has linked to is NOT a self runner. You would have to trust that their readings are correct. And for me the only way to even consider it being something useful, is if it self runs.
In any case, probably not one person will try to replicate that device.
 
  I will stick with and focus only on the Akula/Ruslan, or Stalker type replication, until all fields are covered.
 
  To call something a fake, you'll need to provide more proof than just mere speculation about hidden power sources. In my case, Wesley's word on Akula's device was proof enough for me.

  I believe in the ability to tap the Aether, in a useful way, and that is my goal. Yet, I trust no one, until I see the results, for myself. And there is only one way for that to happen, which is to build up a replication.
  There is not one person that has actually built a true and exact replication of any of the self runners, as yet.
   But, I guess that "variety is the spice of life". Or so they say...

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19602 on: April 28, 2018, 04:12:41 PM »
Hi have you seen this stuff?  sling your yoke out and try using this (experiment).

https://www.youtube.com/watch?v=LuD5lb6FydA

Hoppy and Nick look real UFO orbiting Earth !

https://www.youtube.com/watch?v=wWXCfJKHjYE
https://www.youtube.com/watch?v=H7iIsoLujDA

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19603 on: April 28, 2018, 05:09:59 PM »
Well,..    Hoppy i do understand you are close related to Nick and the many years you team up by now,.....

You mean like Yin and Yan.  ;D ;)

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19604 on: April 28, 2018, 05:25:56 PM »
You mean like Yin and Yan.  ;D ;)

No  ;D  more like  Cheech  & Chong