Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718108 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19500 on: April 15, 2018, 04:16:30 PM »
  Sorry Sergh, but you are not at all convincing. You could say that about any and all self runners.
  Keep guessing... but please PROVE your point, by showing HOW Ruslan faked it with what you think are hidden batteries.
  Talk is cheap...
  Remember that Ruslan is showing an outside in the field video lighting up 4000w worth of bulbs.
  Where is the hidden batteries that will run 4000w loads.
   Guess again...

   Adrian also has shown a field video with the same type of device that is a replication of Stalker's device, which was also a replication of the schematic that I posted. Using just the simple Kacher circuit and induction circuits that is shown in the posted schematic.
   
   Wesley (Stivep) has gone to see Akula and has personally witnessed the second Akula device self running.
So, I trust Wesley's confirmation that that is a working device, and it IS self running.

  IF you are here to talk about fakes, you are just wasting your time, and ours. Please show some proof, instead.
  If is obvious that you think that there is no such thing as self running generators. So, why are you here?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19501 on: April 15, 2018, 06:00:46 PM »
   
   Wesley (Stivep) has gone to see Akula and has personally witnessed the second Akula device self running.
So, I trust Wesley's confirmation that that is a working device, and it IS self running.


Nick,

Wesley may have believed he saw a self-runner but he has never to my knowledge been allowed to make a close and invasive examination using instrumentation of either Akula's or Kapanadze's devices Therefore, he cannot be absolutely sure and prove that these devices beyond reasonable doubt were self-runners, any more than I can be absolutely sure and prove that they are fakes. It simply all boils down to opinion and nothing more. I'm not writing this to resurrect the fake v genuine argument, so lets just ignore future posts that express opinion that this or that device is fake, as we cannot stop them being posted.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19502 on: April 15, 2018, 06:15:15 PM »
Nick,

Wesley may have believed he saw a self-runner but he has never to my knowledge been allowed to make a close and invasive examination using instrumentation of either Akula's or Kapanadze's devices Therefore, he cannot be absolutely sure and prove that these devices beyond reasonable doubt were self-runners, any more than I can be absolutely sure and prove that they are fakes. It simply all boils down to opinion and nothing more. I'm not writing this to resurrect the fake v genuine argument, so lets just ignore future posts that express opinion that this or that device is fake, as we cannot stop them being posted.

Hoppy i do agree on that.

Probally those people who do claim this unverified statements had some bad moments......  burned some fets or run out of beer.

You are right,...  we should consider invest effort in the claims that are proven and showed to be real.


Greetings

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19503 on: April 15, 2018, 07:49:31 PM »

You are right,...  we should consider invest effort in the claims that are proven and showed to be real.

Greetings

Indeed! "A lie can travel half way round the world while the truth is putting on its shoes" -  Charles Spurgeon.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19504 on: April 15, 2018, 09:45:54 PM »
   There is already more than enough proof for me already.

  I was hoping that we could build some test circuit together, as that is the only way that we can prove that something works, as shown, or not. But, I can see now why the Russians are so much further ahead on this.
And  why no gringos have come even close to what they've already accomplished.
Yet, Wesley was the only one that went to see Akula's device in person. And I have to trust somebody.
Or,  I'll just be watching more videos, and not doing anything about it. Like some guys here, unfortunately.
   As the saying goes, each to his own.

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19505 on: April 15, 2018, 10:22:39 PM »
  Sorry Sergh, but you are not at all convincing. You could say that about any and all self runners.

I'm sorry, but there's a problem. Ruslan, Akula do not write as competent electronics engineers.

Meanwhile, competent in electronics and physics people have been to the Russian CE forums, but none of them offered a overunity device.

The problem of all OU forums is that clever, honest, qualified people leave the OU topic, disappointed in the competence of the rest of the members and a lot of fake.

PS: LiPo batteries for drones can be small, but powerful
https://www.youtube.com/watch?v=gz3hCqjk4yc

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19506 on: April 16, 2018, 12:59:06 AM »
Well it looks like Lo-ion stuck up the pipe could be pun for some ! but it's getting a bit of a play boy joke dom't you think?
Lets cast our minds back to the original vid he got it from eh! let's look how it could be wound ! I assume the winding under
the yellow tape is a multiple 0f 8hz and the 'white' winding is confusing your brain and it's wound 'complex bifular' to compress
the wave.   

The idea does work                               

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19507 on: April 18, 2018, 05:51:20 PM »
  Hoppy, Itsu:
  I have been trying to repair my fairly new feed back power supply, which has blown.
  Although I had ordered a 110-220v to 24v PS, I got only the 110v to 24v one. And this one has a fan, which really I did not want.
  Anyway, so I over voltaged it, and burnt up the bigger filter caps, which blew their oil all over. I have since replaced the two big 240v, 470uf caps, and pulled out and tested the switching transistor (mosfet) which seams to be ok. But, only 7v is getting to that mosfet (single fet), and it won't switch. Any ideas as to what to do about it would be great.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19508 on: April 18, 2018, 06:30:46 PM »
  Hoppy, Itsu:
  I have been trying to repair my fairly new feed back power supply, which has blown.
  Although I had ordered a 110-220v to 24v PS, I got only the 110v to 24v one. And this one has a fan, which really I did not want.
  Anyway, so I over voltaged it, and burnt up the bigger filter caps, which blew their oil all over. I have since replaced the two big 240v, 470uf caps, and pulled out and tested the switching transistor (mosfet) which seams to be ok. But, only 7v is getting to that mosfet (single fet), and it won't switch. Any ideas as to what to do about it would be great.

Nick,

For starters what DC voltage do you read across the caps and how did you test the mosfet?

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19509 on: April 19, 2018, 12:52:29 AM »
Guys I'm sick and tired from this Russian targeted  disinformation here.
I'm a  VERY GOOD friend of many Russians  (few of them  in Academy of Russian Science.)
but Putin's  dogs  are everywhere now.The delusional, psychopathic, tyrant.
Megalomaniac whose psychopathological condition is characterized by delusional fantasies of power, relevance, omnipotence, and by inflated self-esteem and a need for acquiring  total power and control.
Showing Historically narcissistic personality disorder. We are dealing with  scared to death Criminal living in constant fear of being  eliminated by his criminal (mafia)enterprise members   
The guy who has no safe  heaven  and no place to hide. He must  be in power for the rest of his life as a Tzar(king) of Russia .
Definitely my wife has got better education in  more prestigious facility  than Putin . (in area of psychology)

So some   of them  are:
Discrediting, posing as  FE researcher - one big fake agenda .
I can tell you that I'm 100%  sure that energy conversion device that works  . -  it works as self runner and it exists.
However there is no free lunch.
We do pay only for the device and the energy used is at the cost of nature.
The device must "refill"  "pump into" the amount of energy that is used per unit of time.
The only difference is That the device acts  after all conversion took place, as  ( if I can compare it  to ) a valve.

I did compare it many times to  gravity  force  activated  by mouth ( one single impulse) to suck gasoline/ water/ whatever fluid  at given viscosity  - from the "car tank"
Note: ( one single impulse)- in our case for electrostatic concept devices  can be expressed as e.g  one single impulse/or/ train of impulses from HV spark module for domestic heater and so on.
It is initial energy that must be delivered by us  at our cost  (Think of it as  starting "car engine" but you do not pay for  gasoline)
You first must build  the engine and pay for it, than deliver energy  to the starter from the battery
The fuel is  stolen by us from nature..
We did it before many  times (e.g solar, river flow ..wind )
Tariel was giving presentation to me for free,and to our friend( scientist) from England ( aquarium2) for over 20k spend in total. 
Both of us are true critical, advanced, experienced  and educated in  area of this particular science and we both spend money. By that we would not  create Russian  lies here.
I tell you more .  All of the houses that I have  are worth  less than the value of my lab if I was to buy it new.
In 2010 I have had one multimeter  for $50.
All of these years - what was that for?
What gave me a fuel to struggle  and collect equipment ?
I'm not wealthy guy, but  I can manage well.
-Gushhhhh ...............................
Simple common sense  guys?
Think ...
-do I look  like I live in a dream?
(I have over 500 different  instruments) https://www.eetimes.com/document.asp?doc_id=1296462

 
So right below I will not be so kind and polite  and I do apologize  for that:
Русские тролли :
назвать Вас по имени, быдло очень вежливо, но это просто оскорбление животных.

Wesley

 



     
« Last Edit: April 19, 2018, 03:24:33 AM by stivep »

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19510 on: April 19, 2018, 07:22:41 AM »
  Hoppy, Itsu:
  I have been trying to repair my fairly new feed back power supply, which has blown.
  Although I had ordered a 110-220v to 24v PS, I got only the 110v to 24v one. And this one has a fan, which really I did not want.
  Anyway, so I over voltaged it, and burnt up the bigger filter caps, which blew their oil all over. I have since replaced the two big 240v, 470uf caps, and pulled out and tested the switching transistor (mosfet) which seams to be ok. But, only 7v is getting to that mosfet (single fet), and it won't switch. Any ideas as to what to do about it would be great.
Nick Hi !
I use to get loads of this stuff in for repair and (3 phase controllers (much easier to earn money on ) Anyway your text says 'universal' any way looking at your bare board I see a switch by the large caps!  what you need to do first is check the voltage going to the chip !
if it's a spray on blob, your working a 'bit' in the dark but no bother.

Now how good at electronics are you ? each time you power the thing up you need to discharge the caps or other contraption of choice, connect a bulb across it!!!

because I can step you through some repair tricks if your interested but i don't want you
to bad mouth me if you kill your self because you need to make a list of what you do as if we fix it you have to put it back.
I have to say that, but your a big boy now you can do it and learn a new trick in your arsenal about how PW-P works first hand.

Any way first of all find what the chip supply voltage should be with your meter and then trace back to see what the switch does
withe the capacitors.

Or find the main dropper resistor (disconnect any mains input first)  and power the chip with your variable power supply
monitor the Fets Gate or IGBT's Base input see if control goes active (but it might have other lock outs other than under voltage)
what your trying to do is see if the device still alive.
« Last Edit: April 19, 2018, 01:00:32 PM by AlienGrey »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19511 on: April 19, 2018, 04:06:15 PM »
Nick,

For starters what DC voltage do you read across the caps and how did you test the mosfet?

  The problem seams to be in the input filters and full bridge rectifier at the very input of the PS. I replaced the yellow 0.1uf cap, already, but it still won't fire up. There is also a small brown cap next to the NTC, which has a number on it, of 392, which might be bad. Only about 4v DC come out of the bridge rectifier. So, the same is on the big filter caps.

  I tested the power mosfet by pulling it out and tested it with a multi meter, same as I do the IRFP260N fets that I use on the induction circuit of my device. It is not shorted out, and seams ok.
   The voltage at the 240v caps is very low, about 4v. Same as on the mosfet gate.
   The switch on the side is for changing from 12v to 24v output. Not for changing the input voltage.
   It looks like there is not enough voltage going into the device through the input filters, and rectifier. Although it is getting 120v from the mains. Voltage at the full bridge rectifier DC side is very low, 4v,  and can mean that that rectifier may be bad.
   I'm not very good at trouble shooting and repairing bad electronics. But, hopefully I'll get this PS working again.

   AG: what "chip" are you talking about?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19512 on: April 19, 2018, 04:32:01 PM »
Nick,

Sounds like you have a blown FWBR. If you decide to replace this, then do not power up by plugging in directly to the mains. Get hold of a mains lamp holder and connect this in series with the live conductor. With say a 60W bulb in series, you will see if there is a short circuit, as the bulb will fully light and you will save futher damage to the PSU. If all is OK, the lamp will flash on connection and go very dim or out, assuming there is no load on the output. There could still be damage but an overvoltage at the input often just takes out the caps and FWBR. You should measure around 170V across the caps assuming they are connected in parallel. If in series, then half that across each. Be very careful as these caps will hurt you if connections are accidentally touched!

The PWM chip is seated on the rectangular green strip, bottom RHS of PCB and can look like a black blob.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19513 on: April 19, 2018, 05:10:27 PM »
   Yes, I hope that it all it needs. I've already replaced the two big 470uf caps, and the 0.1uf input filter cap.
   My older PS is 110v to 220v, so the rectifier is different, and can't be used to replace the one on the new PS.
   I'll look for another 110v rectifier in my junk pile, first, one that fits the PCB on the new PS. And report back.
   The small green rectangular board has a chip on it, but no black blob.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19514 on: April 19, 2018, 06:46:35 PM »
Nick,

Sounds like you have a blown FWBR. If you decide to replace this, then do not power up by plugging in directly to the mains. Get hold of a mains lamp holder and connect this in series with the live conductor. With say a 60W bulb in series, you will see if there is a short circuit, as the bulb will fully light and you will save futher damage to the PSU. If all is OK, the lamp will flash on connection and go very dim or out, assuming there is no load on the output. There could still be damage but an overvoltage at the input often just takes out the caps and FWBR. You should measure around 170V across the caps assuming they are connected in parallel. If in series, then half that across each. Be very careful as these caps will hurt you if connections are accidentally touched!

The PWM chip is seated on the rectangular green strip, bottom RHS of PCB and can look like a black blob.
Yes that's what I think and yes the blob on the green board does the housekeeping can you put a 15w night light bulb across the caps if you have that switch on 110v and you put 240v on it did you see any arching ? you could have had nearly 900v you need to test everything on the board
I bet the PW TX didn't like that but if your lick you might get away with it, but test everything else for damage .

You can test fets if you put voltage across gate and sauce with a meter or a cap meter should be about 2nf and make sure it turns on  and off,
or we will be sending Hoppy out  ;D ;D

PS be sure to check out those blue tings!