Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719668 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18615 on: December 11, 2017, 03:24:50 PM »
   Ruslan's video is showing his KACHER circuit right next to his ground connection that goes to the bottom end of his Kacher secondary coil.  That's why it's confusing.
  The ground line is NOT going to the transistor base, nor emitter.  Yet, it would be the same as if it was on the transistor's base.  So which is it, really...
  Good thing that you're not confused by that old Ruslan video.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18616 on: December 11, 2017, 10:54:01 PM »
   Ruslan's video is showing his KACHER circuit right next to his ground connection that goes to the bottom end of his Kacher secondary coil.  That's why it's confusing.
  The ground line is NOT going to the transistor base, nor emitter.  Yet, it would be the same as if it was on the transistor's base.  So which is it, really...
  Good thing that you're not confused by that old Ruslan video.
I think your using the old self oscillating circuit, the problem with that is you cant alter the pulse width recovery time, and that circuit does not turn the 2SC transistor too well so it gets hot as it's running all the time. the Akula circuit is a pulse driver with a better control of the output transistor is what he is saying.

I have found an old styal circuit you could try a diode in the emitter circuit see if it turns off any better but it's an analogue bias type circuit I couldn't get any where with it as it's unreliable.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18617 on: December 12, 2017, 05:03:52 AM »
  AG:
  Your diagram is not showing any earth ground going to the diode nor to the transistor emitter.
  As I've mentioned, I've already tried it several ways, and see no difference in the Kacher signal.
  I have no problem with the kacher transistor getting hot, if I did, I'd just turn the fan on. Most of the time I don't need to use the fan.

  Itsu: I seam to have burned out the 15v voltage regulator which feeds the mosfet drivers.
 Is there a problem to substitute it with a 12v voltage regulator? As I don't have any of the same 15v regulators on hand. What will that change do to the Kacher's running frequency? Will it lower it, or raise it? Or neither? 
  I'd like to be able to lower the Kacher's frequency, if possible. As the current fet drivers 13.5KHz lower limit may be too high when using the higher wattage 400w to 600w bulbs as the load.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18618 on: December 12, 2017, 10:03:14 AM »
Nick to be honest I played about with that cuircuit (self oscillating in that circuit your using) i found if using it as a Tesla coil you get a nice narrow pulse dring the coil but as soon as you use it in the circuit your using and draw current from it it's drive turns to a sine wave and is useless for the effect. Also the earth needs to be on the base of the Tesla winding, look at the pulse on your scope FROM A DISTANCE! is it's not a narrow pulse your wasting your time.

Also re the 15 volt reg  note the mosfet driver can drive over an amp into the C load of gates use a bigger 15v reg I use a 12v driven from 15 volts and it gets warm and its an S version on a heat sink you need big caps across the mosfet driver too.

Anyway most of the circuits are BS none of them work with that configuration.


 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18619 on: December 12, 2017, 10:24:48 AM »
If I were you I would not get too bogged down with this device or any of it's circuits.

I found this you might want to explore the avenue from the past and see what you can find on google


Between 1897 and 1901 John Sealy Edward Townsend discovered the process of Free Energy, were free electrons are accelerated in an electric field between two electrodes. As the electrons are accelerating they are ionising more atoms that liberates more electrons that are moving toward the anode (the positive (+)). The ionized atom moves toward the catode (the negative (-)).This is known as the Electron avalanche also known as Townsend discharge.

Have fun ! ;)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18620 on: December 12, 2017, 11:12:32 AM »
  AG:
  Your diagram is not showing any earth ground going to the diode nor to the transistor emitter.
  As I've mentioned, I've already tried it several ways, and see no difference in the Kacher signal.
  I have no problem with the kacher transistor getting hot, if I did, I'd just turn the fan on. Most of the time I don't need to use the fan.

  Itsu: I seam to have burned out the 15v voltage regulator which feeds the mosfet drivers.
 Is there a problem to substitute it with a 12v voltage regulator? As I don't have any of the same 15v regulators on hand. What will that change do to the Kacher's running frequency? Will it lower it, or raise it? Or neither? 
  I'd like to be able to lower the Kacher's frequency, if possible. As the current fet drivers 13.5KHz lower limit may be too high when using the higher wattage 400w to 600w bulbs as the load.



Nick,

i don't think it will be a problem to replace it with a 12 V regulator.
I don't see how it could influence the Kacher running frequency either.

Not sure what you mean by "the current fet drivers 13.5KHz lower limit", as i don't see such a limitation in the TC4420 data sheet.

To lower the Kacher frequency, you could add some turns to its secondary.

Itsu


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18621 on: December 12, 2017, 12:06:49 PM »

Nick,

i don't think it will be a problem to replace it with a 12 V regulator.
I don't see how it could influence the Kacher running frequency either.

Not sure what you mean by "the current fet drivers 13.5KHz lower limit", as i don't see such a limitation in the TC4420 data sheet.

To lower the Kacher frequency, you could add some turns to its secondary.

Itsu
Note if Nick is powering the TL494 with 15v it is an RC device lowering to 15v to 12V I suspect will lower F too.

plaxius

  • Newbie
  • *
  • Posts: 27
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18622 on: December 12, 2017, 12:42:09 PM »
  AG:
  Your diagram is not showing any earth ground going to the diode nor to the transistor emitter.
  As I've mentioned, I've already tried it several ways, and see no difference in the Kacher signal.
  I have no problem with the kacher transistor getting hot, if I did, I'd just turn the fan on. Most of the time I don't need to use the fan.

  Itsu: I seam to have burned out the 15v voltage regulator which feeds the mosfet drivers.
 Is there a problem to substitute it with a 12v voltage regulator? As I don't have any of the same 15v regulators on hand. What will that change do to the Kacher's running frequency? Will it lower it, or raise it? Or neither? 
  I'd like to be able to lower the Kacher's frequency, if possible. As the current fet drivers 13.5KHz lower limit may be too high when using the higher wattage 400w to 600w bulbs as the load.


[size=78%]Nick, I recommend using a DC-DC buck of this type.[/size]
[size=78%]
[/size]
https://es.aliexpress.com/item/DC-DC-Buck-Converter-Step-Down-Module-LM2596-Power-Supply-Output-1-5V-35V-DIY-Part/32737337535.html?src=google&albslr=225409384&isdl=y&aff_short_key=UneMJZVf&source=%7Bifdyn:dyn%7D%7Bifpla:pla%7D%7Bifdbm:DBM&albch=DID%7D&src=google&albch=shopping&acnt=494-037-6276&isdl=y&albcp=913280151&albag=47655558845&slnk=&trgt=388120373908&plac=&crea=es32737337535&netw=g&device=c&mtctp=&gclid=EAIaIQobChMI8Z_qkrKE2AIVAlcNCh082AWdEAQYAiABEgJnr_D_BwE

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18623 on: December 12, 2017, 03:29:55 PM »
   AG:
   As mentioned, I have NO problem using the simple Kacher circuit. It works for me. It also worked for Ruslan, Roma, Adrian, etz.
   I have shown the "effect" in a video, with my Kacher/grenade running on the Mazilli circuit lighting 4 100w bulbs.
It was with the same Kacher and grenade coils, as I have on now. My newer and more recent TL494/TC4420 circuit can't seam to produce the same degree of the "effect", as yet. The rest of the device being the same.
   
    There is no such thing as a narrow pulse, with the simple Kacher circuit. It outputs a sine wave, which I CAN control between 850KHz to 1.1MHz.  The mentioned 13.5KHz lower frequency limit of the induction circuits is controlled by the 102 tuning cap on the TL494, not by the fet drivers.
 
   None of the guys here that have built the controlable Kacher circuit have shown it working to self run itself, yet.
 Or even being able to light several hundred watts worth of bulbs while showing the same "effect" generation. Like 500w to 1000w worth of bulbs.  So, I'll just wait and see what happens with them, before going that route.
   
   It's best to build something yourself which works, that way you can prove your ideas to yourself. As just throwing out advice without backing it with a working device is not very convincing.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18624 on: December 12, 2017, 04:13:27 PM »
On the subject of earth ground, the attached video clip of Kapanadze's 200W garage device (witnessed working by Wesley) shows an interesting ground cable, looking like a flat twin type cable with possibly a hessian / cloth sheath. Can anyboby identify exactly what cable type this is?

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18625 on: December 12, 2017, 04:37:21 PM »
Earth ground copper

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18626 on: December 13, 2017, 01:31:48 PM »
   AG:
   As mentioned, I have NO problem using the simple Kacher circuit. It works for me. It also worked for Ruslan, Roma, Adrian, etz.
   I have shown the "effect" in a video, with my Kacher/grenade running on the Mazilli circuit lighting 4 100w bulbs.
It was with the same Kacher and grenade coils, as I have on now. My newer and more recent TL494/TC4420 circuit can't seam to produce the same degree of the "effect", as yet. The rest of the device being the same.
   
    There is no such thing as a narrow pulse, with the simple Kacher circuit. It outputs a sine wave, which I CAN control between 850KHz to 1.1MHz.  The mentioned 13.5KHz lower frequency limit of the induction circuits is controlled by the 102 tuning cap on the TL494, not by the fet drivers.
 
   None of the guys here that have built the controlable Kacher circuit have shown it working to self run itself, yet.
 Or even being able to light several hundred watts worth of bulbs while showing the same "effect" generation. Like 500w to 1000w worth of bulbs.  So, I'll just wait and see what happens with them, before going that route.
   
   It's best to build something yourself which works, that way you can prove your ideas to yourself. As just throwing out advice without backing it with a working device is not very convincing.
Interesting but what if its just ferro resonance ?  look up 'avalanche' phenomena I sent you see here example https://www.youtube.com/watch?v=Jqptq7A9cGU

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18627 on: December 13, 2017, 07:33:14 PM »
Interesting but what if its just ferro resonance ?  look up 'avalanche' phenomena I sent you see here example https://www.youtube.com/watch?v=Jqptq7A9cGU


   I see nothing about "avalanche phenomena" in that video.
  Using either AC nor DC he can only barely light the small bulb.
While I can light a 100w bulb with just my Kacher. And lower wattage bulb even brighter.
  But, the idea is not to light bulbs with HV, but to interrupt the magnetic field, with the HV pulses, instead.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18628 on: December 13, 2017, 07:54:54 PM »
Hang on a moment  :o

So how much current is your device drawing when its running your full load ?

in the film he is showing the green spark that's the avalanche effect that depends on gap and energy and frequency if you look it up. The effect is donkey years old

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18629 on: December 13, 2017, 09:22:48 PM »

[size=78%]Nick, I recommend using a DC-DC buck of this type.[/size]
[size=78%]
[/size]
https://es.aliexpress.com/item/DC-DC-Buck-Converter-Step-Down-Module-LM2596-Power-Supply-Output-1-5V-35V-DIY-Part/32737337535.html?src=google&albslr=225409384&isdl=y&aff_short_key=UneMJZVf&source=%7Bifdyn:dyn%7D%7Bifpla:pla%7D%7Bifdbm:DBM&albch=DID%7D&src=google&albch=shopping&acnt=494-037-6276&isdl=y&albcp=913280151&albag=47655558845&slnk=&trgt=388120373908&plac=&crea=es32737337535&netw=g&device=c&mtctp=&gclid=EAIaIQobChMI8Z_qkrKE2AIVAlcNCh082AWdEAQYAiABEgJnr_D_BwE


  These cheap converters can only output 2 amps.  Not enough for the induction circuit.
I suppose that it could be used for the Kacher's input by itself, if needed. Probably takes a month to deliver it.

   I'm working on making a 24v battery bank for now out of lithium ion batteries.
   My new PS will be delivered in about two more weeks.