Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718242 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18585 on: December 02, 2017, 10:12:40 AM »
Hoppy is that a joke or a cry of desperation ? read Magpowers last posting again, If you would pls.


 ??? Magpwr wrote: "I am no longer involved in this replication task." So in my opinion its fair to ask if he is working on any others.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18586 on: December 02, 2017, 12:37:56 PM »
??? Magpwr wrote: "I am no longer involved in this replication task." So in my opinion its fair to ask if he is working on any others.
Good point, Magpower is a good man as others lets hope so, it least he is watching what going on.

AG

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18587 on: December 02, 2017, 12:51:33 PM »
Hi Mags,

Are you attempting to replicate any of the claimed self-runners?

Hello Hoppy,

No i am not doing anything in the area of OU after running out of luck on creativity.

Last best achieved was 10khz circuit operation but output 80khz "sine-wave" using parametric oscillator circuit using LM393 as front end to small toroid coil(sensor) in parallel with 10ohms only with with kacher activated but no OU.
Above circuit i was using divide by 3 counter (50% duty shown in my youtube:sanjev21) after hex inverter after LM393N.Derived from Akula circuit using frequency divider 4017 in block diagram.
But Geofusion demo revealed something very unusual for me at his "Kacher Antenna".

You might be already aware more turns at transformer or kacher/tesla coil would produce higher voltage but current would decrease.
For Geofusion case i was seeing orange spark at Antenna compared to the spark taken at top of tesla or kacher coil violet colour.

It's just too bad due to lack of proper measuring equipment for Geofusion is unable to reveal pwm frequency/duty cycle and frequency of tesla coil (probe at a distant).

Not to forget i was using IGBT(similar to Akula) driven at 15volts peak instead of MOSFET which is easy to be damaged.

So long story short due to insufficient further input i am unable to come up with anything new in my head or even perform a wave form generater freezed comparison related to pwm /kacher frequency from Geofusion.





 

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18588 on: December 02, 2017, 04:07:47 PM »
Hello Hoppy,

No i am not doing anything in the area of OU after running out of luck on creativity.

Last best achieved was 10khz circuit operation but output 80khz "sine-wave" using parametric oscillator circuit using LM393 as front end to small toroid coil(sensor) in parallel with 10ohms only with with kacher activated but no OU.
Above circuit i was using divide by 3 counter (50% duty shown in my youtube:sanjev21) after hex inverter after LM393N.Derived from Akula circuit using frequency divider 4017 in block diagram.
But Geofusion demo revealed something very unusual for me at his "Kacher Antenna".

You might be already aware more turns at transformer or kacher/tesla coil would produce higher voltage but current would decrease.
For Geofusion case i was seeing orange spark at Antenna compared to the spark taken at top of tesla or kacher coil violet colour.

It's just too bad due to lack of proper measuring equipment for Geofusion is unable to reveal pwm frequency/duty cycle and frequency of tesla coil (probe at a distant).

Not to forget i was using IGBT(similar to Akula) driven at 15volts peak instead of MOSFET which is easy to be damaged.

So long story short due to insufficient further input i am unable to come up with anything new in my head or even perform a wave form generater freezed comparison related to pwm /kacher frequency from Geofusion.

Hi magpwr,

Well, I do have the right measuring equips to see what the frequencies which things are and
even a probe if needed to see what happens to the field near the Antenna and grenade.

Btw, the Kacher, Yes without the ferrite choke and the antenna you can see the normal violet color,
But it's the whole configuration of how you connect the ferrite piece and the antenna, especially the direction! is very important
and the distance to the inductor wounded ontop of grenade. this brings amps in the high voltage end. even without the grenade it is
manageable to get those orange arcs. Has to do very less about how the freq should be and yet good amount of power pumped in,
duty cycle or so. but it's  all about the winding directions.
This was already done with simple kacher circuit, still on vidoes for view.
without that result I am unable to get the manifestation which was presented in lastest videos.
It show's how the Tesla coil/kacher is actualy calling upon the charges which that will be accelerated within the
induction pulsed inductor on grenade. Frequencies can differ everymoment, It was everytime on each setup different but
getting it to do that , there are methods.

lets say the last time it was working on bench, was reading 21khz pwm over toroid and about 880khz freq tesla coil antenna.
with the tapping points on the secondary of tesla coil, it changes values and might get better results on harmonics of it.
but I assure you, freq at some point is to overclock the energy coming in that is it, is part of how I see it and has something more to it.

I'll give you a tip, the series resonance does not have to be on point ( Top and best series resonance area with the 3T and cap)
 for it to resonate with incoming charges from antenna,
 this is where many don't understand and it was hard for me to figure this one out while doing  wicked experimentation.
It has sweet spots, Imagine the magnetic field bubble and how the antenna is sitting in it, and accelerate.
Nickz is close by doing this, he is hitting those sweet spots. where things get very fragile and even the hand creates capacitance.

cheers~

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18589 on: December 02, 2017, 06:21:07 PM »
https://www.youtube.com/watch?v=5Nk1KLkfYfk
I have approached  them  some time ago.
In my mind they have no agenda no plan an fainting memories of  a father  who died making no money on his invention. 
I was simply ask to  donate money,  but if the amount of money  will be sufficient enough  than   I'm going to get all of the secrets  available .


Another words I understood it as:
-we want  to  make technology  available  to  humanity
-we need money  and we have team, we have web page.
-we do not give information  about any progress form the past  and  from the present time as this is  our proprietary achievement.
-However if you pay us enough of money than we are  willing to stop working on it as you have got everything what we know,
 but you must remember that if you get yourself into any results  promising profitable activity in this area than
 we need  part of it as  we are  the family of  that great man  whose work  you used. 

summary:
There is no work  no real value and no  development.
After few weeks  of exchanging information  I have got myself  into a.... conclusion that
yes... it is a  group of people family members  called Team.- with no  technical skills  and no work in progress.
Whatever is donated is used for life expenses of the people behind it.
But of course this is my impression  and you may  have different one.
 
Wesley

PS: by the way  real value for free   look  here
  https://www.youtube.com/watch?v=SEQTer29Vq4&t=12s

This is new video:
https://youtu.be/2wVuoNt354o
-motors,
-Magnetic Levitation,
-Human ❤ Levitation
-Superconductivity,
-Aurora Borealis,
-magnetic pressure
-temperature based   experiments
-levitation of a woman
« Last Edit: December 03, 2017, 04:10:32 AM by stivep »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18590 on: December 02, 2017, 08:20:02 PM »
   Geo:
   To compare notes, my kacher  is also running between 850KHz, to 1.1MHz. Ferrite inside can raise the frequency to 1.1MHz.

   But, the induction circuits running frequency need to be adjusted to every bulb added, on my device. I can't just keep adding bulbs without readjusting the running frequency. But, it seams that for me, the higher the wattage bulbs used, the lower the frequency needs to be. And I can't go lower than 13KHz, as that is my TL494's lower frequency limit.
   So, my 3 200w bulbs seam to be needing a lower frequency, one that is lower than my 13KHz limit. Therefore, I'm using lower wattage bulbs, for now, as the Kacher has an easier time obtaining the sync there.
   There is only one point, or sweet spot where the hand movements, as well as the Kacher's interaction is noticed. And it's there that the magic happens. The question is, what will it take to self run?

   I'm building up a 12v battery bank from laptops batteries. A 12v battery bank , to go along with my 12v, 7ah battery, for 24v total voltage. We'll see how it goes.
   As I charge the batteries from my solar panel, I guess you could call it free energy, of sorts, already.
  Hopefully the batteries will just be used to kick start the contraption, and not for running off of.
  I am also waiting for a new PS to be brought to me from the U.S. But, that's a month away, so for now I'll use batteries, instead.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18591 on: December 04, 2017, 10:12:13 AM »
 
   There is only one point, or sweet spot where the hand movements, as well as the Kacher's interaction is noticed. And it's there that the magic happens. The question is, what will it take to self run?


Nick,

Are you looping back yet? Try disconnecting one of the push push-pull mosfets, then re-tune for better 'effect'.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18592 on: December 04, 2017, 12:47:42 PM »
And what does cutting off the push pull do ? its just a frequency game changer.

Better still try the TK way charge up a high voltage and dump it into the katcher primary as a pulse
connect the kacher output into resonant Tesla transformer and collect the output of its secondary
you might get some where then. 

AG


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18593 on: December 04, 2017, 02:03:46 PM »
   Hoppy:
   No, I have not tried to feed back to the input, yet. 
   However, I'm not too interested in disconnecting a fet to see what happens. As Apecore has already done that test for you, and posted his results in a video. 
  Why don't you get the dust and cobwebs off of your device, and play around with running it on one fet...
   Like AG mentioned, running on just one fet, it's just going run at a different frequency, not a big game changer.
 
   I don't have a 24v PS that can serve for the feed back loop, as mine burnt out.
   I will soon try to use batteries for the input source, and use an 18v 6A laptop adapter for the feed back loop.
But,  I already know what will happen.
The system has to be able to do more than just barely light some bulbs, first, for it to be able to self run itself.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18594 on: December 04, 2017, 02:34:17 PM »
   
The system has to be able to do more than just barely light some bulbs, first, for it to be able to self run itself.

Why is that necessarily the case?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18595 on: December 04, 2017, 03:09:58 PM »
   After watching all the guys that have gotten to that point with no results to show for. That is why I think that that is the case.
   If you really thought that it would work that way, you'd do more about it, than what you have been doing, lately.
   
   I'll connect up a feed back path, soon, and let everyone know how well it worked out. But, don't hold your breath.


   AG, is full of suggestions and advice, but does he try any of them himself, first? And just keeps pointing to other unrelated devices, which he again won't bother to replicate. That's ok, but it's still distracting from the focus of this thread, and what we are actually  doing here. At least those few guys that are still actually doing something about it all.
  The guys that are just watchers,  just keep watching, while sitting on their hands. 
« Last Edit: December 04, 2017, 08:07:39 PM by NickZ »

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18596 on: December 04, 2017, 04:46:14 PM »

  AG, is full of suggestions and advice, but he does try any of them himself, first. And just keeps pointing to other unrelated devices, which he again won't bother to replicate. That's ok, but it's still distracting from the focus of this thread, and what we are actually  doing here. At least to those few guys that are still actually doing something about it all.
  The guys that are just watchers,  just keep watching, while sitting on their hands.
Whoooooo!

well as it happens i have been experimenting, I'm pretty sure after the katcher it needs to go into a tripler module to boost the voltage up to a +ve level 3 or 4 kv, Ive wound a ferrox transformer and its fed by 2 fets to give 1.25kv from 12volts, I can get 3.5kv with a 50 50 cycle but it needs to be pulsed.

So as I don't blow my electronics up I'm experimenting with a 12v large relay coil, I made up a variable freq osc to give a triangle wave from a cmos 555 and feeding it into a LM358 differential  amp to give a perfect width control for pulse tests on the relay large silver contacts and coil charge pump circuit not done the charge pump bit yet.

Also perhaps i can find out Nelsons little secret or not as the case might be.

But I should be able to test for correct drive and output gain if any.

AG

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18597 on: December 04, 2017, 04:47:36 PM »
The system has to be able to do more than just barely light some bulbs, first, for it to be able to self run itself.

Hi Nick. I agree that is probably true. It seems not very likely at all that the system will self sustain
when self looping if you are not seeing a very notable OU effect when the system is not self looped.

All the best...


Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18598 on: December 04, 2017, 05:07:05 PM »
   After watching all the guys that have gotten to that point with no results to show for. That is why I think that that is the case.
   If you really thought that it would work that way, you'd do more about it, than what you have been doing, lately.
   

Nick,

I have no real idea how it should be built and tuned for self-running. I'm just throwing in thoughts like others. You have no idea what I've been doing lately.  ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18599 on: December 04, 2017, 08:16:24 PM »
   Well, Hoppy you do have an idea of how it's supposed to work. Ideas are only useful if they are backed by tests. Each to his own.