Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715873 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18495 on: November 11, 2017, 08:55:36 PM »
   Well, that means that it was working, but maybe without the proper snubbers. So it goes into avalanche and can easily burn he FETs. Or not?  You didn't spend much time tuning it, afterwards.


Yes, it was working well in terms of the 'effect' and I had no real problem tuning into it. It was at this point that I found that I could disconnect one side of the push-pull and still get the effect. I did not burn the mosfets as I was using TVS protection.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18496 on: November 11, 2017, 09:08:03 PM »
Hoppy i agree 100%.
It would be easy to see if the power IN (Amps) to the pushpull device would increase at the moment the kacher is activated.
Seems to me the only way to clear_up this chapter about "the effect"

Best regards

Yes, this why I keep on to Nick about the importance of monitoring supply voltage and current to get a good handle on power consumption. In my opinion, the 'effect can only be considered significant, if it can be shown that it improves the device efficiency. In my case, I could see no evidence of this.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18498 on: November 12, 2017, 05:02:12 AM »
Hi all :)

About the device, Just a recap on some what I experienced and some good tips.
The pushpull or any other HF drivers for mosfets to able to do the same action and I say,
just make sure there are no filter caps right after the IC (TL494 as example) which makes freq for you which feeds the drivers for the Fets
 on the driver board, that kills the operation completely. This is the reason why I shared the exact same diagram long time ago.
the TL494 and the IR2110 config.

The point of output.
The Kacher or better to say Tesla coil is what manifests this energy at the output. More to say, has the full control of this energy which we
all are looking to see manifest at the output.
What I do believe now is that small tweak recently I did with closer antenna to
bifilar inductor is what made me to understand this more clearer also. ( this is only for this method , there are more ways )
Imagine the tuning has to be such condition with Antenna's harvestation of the charged particles ( Ions/,radiant and positrons which are anti electrons ) and having it to be right in the zone of the magnetic field which the bifilar inductor has generated which it will resonate to the antenna incoming charges,
(not the full resonance of the bifilar it self )
distance of Antenna  close to the bifilar is crucial depending the Kv range it produces.
This made the difference in my latest recording about the test that has been done without 28T from toriod/yoke and only the 3T series.
By this time it is already shown on video and even scope readings on what we expect what kacher should be doing.
Since it calls upon the charged particles being excited by the interruption cycles of
the Tesla coil/ Kacher operations. So the Cycle needs to be interrupted, (Dead Time).
Also repeated so much times per time to manifest it even more.
So it should not be generating normal Sinus waves, but interrupted ones at the peak of each and cut off after and repeat.
Better to say to generate spikes.

With that new dead time controller I am able to get a bit more lumins out from that 300W bulb in previous recording.
This is only Tesla coil at work here.
The rate of power into the series resonance coming pushpull /yoke to 3T series cap  which is generating the HF magnetic field is
insufficient to even light or even burn the filament of the 300W bulb. Also already shown on recording.

 Right now there is also greater white arcs  present and they do not only burn but give nasty shocks.
Regular setting is pure plasma stream which burns.
Look, if the kacher can produce just abit this " white arc " you will see light manifestation. which I had many times befor.

The amount of amps IN with kacher determines  the amount of turns of Primary and diameter of copper if to see increase of decrease.
The IN amps can vary in many ways depending the setup.
What's interesting here is when the effect is running, the amount of Amps IN is set amazingly to a point which I still do not understand fully
and what happens is everytime to put load it will show where it will not increase Amps IN
but it shows that it has a threshold until where it will  start to decrease Amps IN  after,
so the  more load you add the lesser Amps IN you will see at IN and this is where you can determine
the amount stored energy it created/ harvested and accelerated within the field of control.

Think I shed some more light on the subject to understand what we are looking for.

           
             Cheerz~

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18499 on: November 12, 2017, 10:53:03 AM »
Hi all :)


What's interesting here is when the effect is running, the amount of Amps IN is set amazingly to a point which I still do not understand fully
and what happens is everytime to put load it will show where it will not increase Amps IN
but it shows that it has a threshold until where it will  start to decrease Amps IN  after,
so the  more load you add the lesser Amps IN you will see at IN and this is where you can determine
the amount stored energy it created/ harvested and accelerated within the field of control.
           
             Cheerz~

Hi Geo,

Thanks for your update. Read up on LC tank circuits for an explanation.

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18500 on: November 12, 2017, 02:00:39 PM »
Hi Geo,

Thanks for your update. Read up on LC tank circuits for an explanation.

The Tesla bifilar coil should be considered as COIL + Capacity its a form of TANK Circuit that is design to resonate on its own. That coil will freely vibrate to its own resonant frequency when induced from any suitable primary induction coil, whether its arbitrary frequency or resonant driving primary.  When we can get the resonance on the Bifilar capcoil then it will vibrate on its own in a longer time before it dissipate.
Just sharing.

Will

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18501 on: November 12, 2017, 02:05:29 PM »
   Geo:
   Have you connected the rest of your system up? Such as the 28t coil, tuning caps, rectifier, etz...

   Can you show us what your voltage readings are at the output bulbs, and your TL494 running frequency, Kacher's running frequency, etz...

   My device works a bit differently, and can light the big bulbs on just the induction circuits, no problem. The nearness of the yoke to the grenade coils makes no difference on my set up, and also the hand movement can't completely kill the output, either. Nor can the hand movements near the antenna make as big a difference, as on your device.
  Also, my voltages at the TL board (drains) go UP with each added bulb, also the amp draw goes up, while the light (lumin levels) at the bulbs goes down with each additional bulb. I'm mentioning this as a comparison, to try to understand what is happening and why these things are happening, and what to look for and tune to for the best results.
 
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18502 on: November 12, 2017, 04:23:48 PM »
The Tesla bifilar coil should be considered as COIL + Capacity its a form of TANK Circuit that is design to resonate on its own. That coil will freely vibrate to its own resonant frequency when induced from any suitable primary induction coil, whether its arbitrary frequency or resonant driving primary.  When we can get the resonance on the Bifilar capcoil then it will vibrate on its own in a longer time before it dissipate.
Just sharing.

Will
Hi I'm a bit confused by your post could you please explain some of the vagueness in your post please, is the bifilar device (as i'm sure many have not wound the yoke in that fashion) referring by any chance to the Ferrite yoke or Torrid and whats a cap coil please explain? I'm sure your post is of interest to many, once some of us understand the translation.

Also I have just noticed in Geo's post he appears to refer to the 'bifilare' winding as part of the grenade, I'm still a bit confused here as no part of the grenade is intact bifilar wound as such any chance we can define which section of the grenade is bifilar wound ?
Bifilar wound the winding of two coils wound  side by side with the strands side by side see coil, see illustration so as not to
cause confusion.

kind regards
Many thanks AG
« Last Edit: November 12, 2017, 10:28:31 PM by AlienGrey »

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18503 on: November 13, 2017, 05:15:34 AM »
Hi AG,
Check the pic below, that's the Bifilar ( Tesla bifilar ) I was talking about.
see the Purple highlighted box ;).

Cheerz

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18504 on: November 13, 2017, 07:51:19 AM »
Hi Geo
Many thanks for clearing up that valued bit of information.

Mine is wound just like that, however i did insert a space between the katcher
and that winding you refer to with some 3mm strimmer PVC to try and keep the heat down.

If that is any help to any one.

regards AG

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18505 on: November 14, 2017, 04:09:47 PM »
Hi I'm a bit confused by your post could you please explain some of the vagueness in your post please, is the bifilar device (as i'm sure many have not wound the yoke in that fashion) referring by any chance to the Ferrite yoke or Torrid and whats a cap coil please explain? I'm sure your post is of interest to many, once some of us understand the translation.
Many thanks AG

I call it cap coil. Tesla bifilar is considered coil when we think of its 1st half, the other half is capacity when the bemf(self Induction) start to kick. In a sense its a tank circuit that needs to vibrate freely(resonance) and away from exciter.

Will

r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18506 on: November 14, 2017, 05:52:09 PM »
Spark GAP =/= Spark gap (differences)
what is going on ?
https://youtu.be/ZEKS4KlsNsA

and next video with bulb and ferrite core.
https://youtu.be/FnhR_DhApE8
https://youtu.be/T00o-Y7cEmY

All videos only connect spark from zvs/flyback 12V battery car to modulation coil. Granata connected directly to light bulb. No earth ground.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18507 on: November 14, 2017, 10:31:12 PM »
Spark GAP =/= Spark gap (differences)
what is going on ?
https://youtu.be/ZEKS4KlsNsA

and next video with bulb and ferrite core.
https://youtu.be/FnhR_DhApE8
https://youtu.be/T00o-Y7cEmY

All videos only connect spark from zvs/flyback 12V battery car to modulation coil. Granata connected directly to light bulb. No earth ground.

Hi r2fpl. It looks like normal induction to me. Some spark plugs have a resistor in them
which can limit the current, and the open air thick copper wire spark gap he used
would likely conduct more current when he adjusted it to the smaller gap distance. The other
'American' spark gap tube he used may just have too wide of a gap. His cell phone might not last
too long if he keeps putting it right on top of the grenade winding while powering it with
a high voltage spark gap. :)

I have seen odd behavior with spark gaps sometimes however. I have placed a spark gap
on the high voltage side of a light bulb with the light bulb connected to ground on the other side,
and it didn't light up very bright, but when I moved the spark gap between the ground wire and the
light bulb instead, or added another spark gap there, the light bulb lit up brighter. Not sure why
that was, but I found it odd anyway... ;D

All the best...


r2fpl

  • Hero Member
  • *****
  • Posts: 744
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18508 on: November 15, 2017, 08:19:27 AM »
Void:  :)  I did not know that there was a resistor in the spark plug :(

Belfior

  • Hero Member
  • *****
  • Posts: 534
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18509 on: November 15, 2017, 09:43:39 AM »
I call it cap coil. Tesla bifilar is considered coil when we think of its 1st half, the other half is capacity when the bemf(self Induction) start to kick. In a sense its a tank circuit that needs to vibrate freely(resonance) and away from exciter.

Will

Jacks Noskills has a theory on the coilcap.

http://overunity.com/17119/pulling-energy-from-the-ambient-energy-field-using-a-coil-capacitor/dlattach/attach/165237/