Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718075 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18480 on: November 11, 2017, 04:38:44 AM »
   Davidwolff:
   The total draw from both input sources is about 7 amps, at 18v.
   If I use all the output from the 6A laptop adapter, it cuts out, due to it's over-current protection circuit. So, at the setting on the device, I would think that it's drawing about 5A. While the Kacher is possibly using most of the 2A input from it's 18v wall adapter. For a total of about 7A, at 18v, or about 126 watts for both circuits.
  The 600w is the output load from bulbs, and not the output coming from anywhere.

DavidWolff

  • Jr. Member
  • **
  • Posts: 75
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18481 on: November 11, 2017, 08:46:40 AM »
Hello Nick thanks for the information.

I think it might be an idea here to obtain a dimmer perhaps a variac  and another 3 same type light bulbs
and compare lamp brilliance till equal and then measure the voltage and current.

Would that be possible to do Nick here ?

Best wishes Dave

 

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18482 on: November 11, 2017, 10:42:13 AM »
   Davidwolff:
   The total draw from both input sources is about 7 amps, at 18v.
   If I use all the output from the 6A laptop adapter, it cuts out, due to it's over-current protection circuit. So, at the setting on the device, I would think that it's drawing about 5A. While the Kacher is possibly using most of the 2A input from it's 18v wall adapter. For a total of about 7A, at 18v, or about 126 watts for both circuits.
  The 600w is the output load from bulbs, and not the output coming from anywhere.

Nick,

The 600W is not the power output, its just the total power rating of the bulbs. I'm correcting you here as this is very misleading and as written could be interpreted by some readers that your device is running OU! I realise that you understand that your device is not running OU but please choose your words more carefully when reporting on power levels.

Thanks for posting your latest video. I find it interesting that you cannot yet show a strong interraction between the Kacher and its affect on bulb brightness. As I reported, when my device was up and running, I had a very strong reaction like Geo. I put the interraction down to feedback on the power rail affecting the push-pull as both my push-pull and Kacher were running from a single power supply. If I read your post correctly, you have separate power supplies and this would be effectively isolating the push-pull and Kacher power rails. This may explain why you are not seeing the interraction. Nevertheless, I did have to tune carefully to get maximum effect.

Belfior

  • Hero Member
  • *****
  • Posts: 534
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18483 on: November 11, 2017, 10:56:53 AM »
What Nikc said was just that. "The 600w is the output load from bulbs, and not the output coming from anywhere."

That means 600W worth of bulbs as load and there is no 600W power output coming out. Sure we can fight about the wattage and is there a 600W load if you just power it with 120W, but in no point he was saying he got OU. Maybe people should read these posts with their eyes and not with their calculators?


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18484 on: November 11, 2017, 11:09:17 AM »
Nice going Nick,

you now have enough run time without the MOSFETs heating up to do some further tuning.

I do notice you seem to have a 3s delay between your video and your sound, can that be right?
At 01:09 into the video you mention the word "Kacher" and there i start hearing the Radio Moscow sound, while at 01:12 you actually flip the switch to the kacher looking at the neon bulbs.

Anyway, looking good.

Itsu
« Last Edit: November 11, 2017, 01:42:52 PM by itsu »

DavidWolff

  • Jr. Member
  • **
  • Posts: 75
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18485 on: November 11, 2017, 03:15:52 PM »
Hello I have read a good many of your comments and i'm trying to figure out a couple of things here.
May be I should mention I was impressed with Geo's latest video and his comments.
What I don't understand is Nicks Katcher appears to do nothing.
It would be interesting to get a scope shot pick up with frequency to see whats going on, if possible

Dave

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18486 on: November 11, 2017, 03:36:26 PM »
if any one is interested regarding the katcher, is it's voltage, one way I found was to use a 50 micro amp meter
but you would need one 20 meg ohm resister  per 1 Kvolt  so a FSD you would need 5 and the scale divided
into 5 equal sections, I also used a fast UV diode and cap across the meter coil to turn it into DC.

so each 1/5th section would be 1kv don't forget to isolate it in a plastic box. health and safety.

If that helps at all

Itsu

Hi if your interested I found some SIC shottky avalanche diodes 1200v 11a  type C4D08120A they can easy replace the КД226A  AND КД226? in the nano pulse generator output section.

I also see your point about the Tesla coil, I went to a pals his coil was charging everything that was metal in close proximity and was just playing havoc with anything electronic.
 

AG
« Last Edit: November 11, 2017, 05:38:59 PM by AlienGrey »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18487 on: November 11, 2017, 03:37:46 PM »
   Itsu:
   The reason it sounds like there is a delay, when the RM is being heard, is because that sound is actually coming from the induction circuits. And not until I turn on the Kacher will you hear the real RM signal.
   I tune the device's induction circuits to where it makes that somewhat similar ringing as the RM sound on the induction circuits, first, which is actually the KFC signal. So that I know where the interaction point is at for the Kacher. But, that KFC sound is not exactly the same tone as the actual RM signal, until I turn on the Kacher circuit. I was wondering about that myself when I viewed the video. As I could not hear that sound coming from the induction circuits when I was making the video, until I watched the video myself.
 My hearing is not that good at some of the higher frequency tones, as I'm 65 years old.

   Now I need to further improve the interaction, which has not been very easy to do. As I really need a new 24v PS, to continue on. Since the lower the input signal is, the harder it is to find the sweet spot. And there is only one extremely narrow point on my device where it happens, a minutely narrow point, which is very hard to find at times.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18488 on: November 11, 2017, 03:52:59 PM »
Hello Nick thanks for the information.

I think it might be an idea here to obtain a dimmer perhaps a variac  and another 3 same type light bulbs
and compare lamp brilliance till equal and then measure the voltage and current.

Would that be possible to do Nick here ?

Best wishes Dave


  Dave:  Well, no. I don't have nor need a variac nor three other bulbs to know that there is no way that the system will be equal in output as grid powered bulbs. Nowhere near. Nor has any else shown that to be the case. Including Akula, Ruslan, Stalker, etz...
  When Ruslan shows his 4000w device in the field, he only has a fraction of that output power, showing at that point. The same with all other self runners. As the wattage as written on the bulbs is NO indication of the actual output being displayed. Nor will watt meters read the output levels properly, at these much higher frequencies.
 Personally I don't care what the input to output readings are. I care about how many lumins are available, and if the device can self run. That's what important to me.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18489 on: November 11, 2017, 04:26:07 PM »
Nick,

The 600W is not the power output, its just the total power rating of the bulbs. I'm correcting you here as this is very misleading and as written could be interpreted by some readers that your device is running OU! I realise that you understand that your device is not running OU but please choose your words more carefully when reporting on power levels.

Thanks for posting your latest video. I find it interesting that you cannot yet show a strong interraction between the Kacher and its affect on bulb brightness. As I reported, when my device was up and running, I had a very strong reaction like Geo. I put the interraction down to feedback on the power rail affecting the push-pull as both my push-pull and Kacher were running from a single power supply. If I read your post correctly, you have separate power supplies and this would be effectively isolating the push-pull and Kacher power rails. This may explain why you are not seeing the interraction. Nevertheless, I did have to tune carefully to get maximum effect.

  Well Hoppy, the reason that both you and Geo were noticing a stronger interaction is because you were using much lower wattage bulbs. Or did you have a 600w load on?  NO...
  I can also show a much higher interaction, if using smaller loads, but not yet with the much higher wattage bulbs.
But, "it will come"...   and remember that I'm only using 126w of input. Not the 240w that the 24v, 10A Ps can provide.
Yet, I will show a better interaction in my next video. In the mean time, I'm doing what I can with the input sources that I have on hand.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18490 on: November 11, 2017, 08:00:05 PM »
  Well Hoppy, the reason that both you and Geo were noticing a stronger interaction is because you were using much lower wattage bulbs. Or did you have a 600w load on?  NO...
 

Like you, I tried various power rated bulbs, even including a 1000W halogen strip and in all cases , I could see a strong interraction effect, albeit that the higher the wattage, the less light output. I could almost extinguish the bulbs with hand capacitance on the Kacher. As I have pointed out several times in the past, I traced the effect down to the push-pull being affected by the Kacher's interference on my supply rail that was common to both the Kacher and push-pull. It was on this realisation, that with help of instrumentation, I showed that the 'effect' was not indicative of anything special relating to greater throughput efficiency.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18491 on: November 11, 2017, 08:05:47 PM »
Make sure you watch this video.
Oh try and pick this apart

https://www.youtube.com/watch?v=FUemx2ZabOw&list=PLukRhLVuz1rkYkKA6J7mkv--YliAulFFx


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18492 on: November 11, 2017, 08:14:38 PM »
Like you, I tried various power rated bulbs, even including a 1000W halogen strip and in all cases , I could see a strong interraction effect, albeit that the higher the wattage, the less light output. I could almost extinguish the bulbs with hand capacitance on the Kacher. As I have pointed out several times in the past, I traced the effect down to the push-pull being affected by the Kacher's interference on my supply rail that was common to both the Kacher and push-pull. It was on this realization, that with help of instrumentation, I showed that the 'effect' was not indicative of anything special relating to greater throughput efficiency.
Hoppy I had much the same effect when I was testing and tuning although i was getting a ferrox resonance oscillation peek at certain frequency's increasing with an earth. so its not uncommon, and in a thunder storm it was brilliant.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18493 on: November 11, 2017, 08:15:49 PM »
Like you, I tried various power rated bulbs, even including a 1000W halogen strip and in all cases , I could see a strong interraction effect, albeit that the higher the wattage, the less light output. I could almost extinguish the bulbs with hand capacitance on the Kacher. As I have pointed out several times in the past, I traced the effect down to the push-pull being affected by the Kacher's interference on my supply rail that was common to both the Kacher and push-pull. It was on this realisation, that with help of instrumentation, I showed that the 'effect' was not indicative of anything special relating to greater throughput efficiency.

Hoppy i agree 100%.
It would be easy to see if the power IN (Amps) to the pushpull device would increase at the moment the kacher is activated.
Seems to me the only way to clear_up this chapter about "the effect"

Best regards

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #18494 on: November 11, 2017, 08:19:15 PM »
   Well, that means that it was working, but maybe without the proper snubbers. So it goes into avalanche and can easily burn he FETs. Or not?  You didn't spend much time tuning it, afterwards.

 That RM sound, with hand movement affecting the signals means that you were close. With interactions going on.
   But, notice how Ruslan's devices are fairly silent when in true resonance. They seam to run at a higher frequency. One you can't hear.   Maybe a dog can hear it, like 27khz,