Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715681 times)

zalmoxis

  • Newbie
  • *
  • Posts: 39
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17295 on: June 03, 2017, 11:15:27 PM »

Hi zalmoxis,

the grenade self resonance was show many times before in this thread and differs from each build.

Here a 0 - 15Mhz spectrum of my (38m) grenade showing severall selfresonance frequencies:


Itsu
Good day to all!
Awesome, Itsu what happens when you hit your grenade at 1.7Mhz tesla/kacher and play with push-pull freq?

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17296 on: June 04, 2017, 12:22:03 AM »
my first public video  ;D https://yadi.sk/i/WKGwoV_s3Jkm8t
At this moment I'm stuck, i don't know what else to test/tune .. i've tried different yokes ferrite rings , with middle tap, and tesla byfilar winding .. i can't get the amplification effect. I use a 15m 16mm^2 ground wire.

Can you please post your first public video in youtube as it is meant by you to be public anyhow?
Можете ли вы опубликовать свое первое общедоступное видео на YouTube, поскольку  оно предназначено  вами, чтобы быть общедоступным в любом случае?


Yandex - "is thought to be"- the dark art of Russian blackmail / spies of  Russian internet company own by  Arkady Yurievich Volozh,
where every download is registered  , IP address is collected and  in some of the material the tracking  activity back-key is included.
That means that from now the downloaded    content  is embedded to registry  and may work,  for "Yandeks " customer.
Such as Алисей Усманов .


I have got the bug by use of Yandex  few days ago that required me to immediately ( 3 seconds) to activate  my mechanical kill switch and  program wiped  my  Restore Point History  so whatever Yandex
 did to it  could not be  reversed.  The only option was to  reinstall operating system . That was no pain as I go on line with "clean disc".  (however all data is lost anyhow.)
The problem is that most of you will never know about it.
Your new restore points will be created but start time would be the Yandex time and your personal data might become Yandex customer  involuntary share-on .


I would really  appreciate you to go to You Tube with your valuable to all of us material.
Я действительно благодарен вам за то, что вы отправитесь в You Tube со своим ценным материалом для всех нас.
 Would you be so kind also to share on youtube again with us a video from Sergey: https://yadi.sk/i/jqjH477n3JknSj

Thank you

Wesley
all above expresses  my personal opinion only  :) ( US constitution free speech rights)



---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
"""""
I'll give and update when the time comes.
« Last Edit: June 04, 2017, 03:06:17 AM by stivep »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17297 on: June 04, 2017, 01:54:38 AM »
   Stivep:
   Reminds me if what Microsoft did to my PC. All my files were wiped out and a new version of Windows 10 reinstalled. With no warning about that at all. I turned on my PC one morning to find this surprise.
   Looks like a free version of Windows 10, was not so free after all. They can do what they want with it, giving no warning. I'd hate to think of what else they can do to ones emails and forum post, even here on OU.com.
  Similar thing with youtube, perhaps.
  Trust no one, and carry a big stick... Such is life.

   Anything else that you can add about your visit with Tariel? Anything new related to his device, perhaps?

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17298 on: June 04, 2017, 11:22:07 AM »
Good day all:

Well, I posted my question and then Itsu answered it before I made the post.......

so Itsu, the remaining question is,  seeing that you used the tracking gen. to get the Resonant frequency for your Grenade configuration:  If you *pulse* the Grenade with *white_noise* or some similar broad spectrum signal, do you get peaks corresponding to the same tracking generator *dips*?

Thanks in advance,

take care, peace

lost_bro


I did that before "sort off" using my FG sweeping and the scope, it produced outputs like shown below (this is an old picture).

It will take some "setting up", so will try it with the present grenade (different one as used in the below picture) lateron, but i guess it will produce a similar signal with the SA shown peaks/dips.

Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17299 on: June 04, 2017, 11:26:54 AM »
Good day to all!
Awesome, Itsu what happens when you hit your grenade at 1.7Mhz tesla/kacher and play with push-pull freq?


Zalmoxis,

i have disassebled my Ruslan setup, so cannot run my kacher, but i did that before without any noticeable effect.
You will have to search back into this thread to see those results.

Itsu

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17300 on: June 04, 2017, 03:45:17 PM »
   To make it easier to find Itsu's results, as well as mine, here below are the links to both Itsu's youtube channel, as well as my youtube channel.

   Itsu: https://www.youtube.com/user/itsusable

   Nick Zec:  https://www.youtube.com/channel/UChwfL5U16oZ20H6zuW-LIHg

   I am totally against secrecy, or posting false or incomplete information or schematics, to keep us barking up the wrong tree.
   I have heard that Ruslan will NEVER disclose his secret.
   I will respect the source of that information, unless the person wishes to share that himself.

   Lossless champs circuit, provided by Verpies, below.
   Keep in mind that although Itsu built the circuit correctly, according to directions from Verpies, it had very limited output at the bulbs. Nor was tested to self run. 
   Verpies can also explain where that information and schematic came from, as well, if he chooses to do so, again. But, I believe that it came from the William McFreely PDF file, which I've since lost. It dealt with a different subject than energy from the Aether, although I may be wrong, or partially wrong there. Verpies can best further explain it's source and purpose.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17301 on: June 04, 2017, 05:09:50 PM »

Zalmoxis,

i have disassebled my Ruslan setup, so cannot run my kacher, but i did that before without any noticeable effect.
You will have to search back into this thread to see those results.

Itsu


   Itsu:  I almost cried when I heard that you did that... 
  Remember that Akula showed his second self running device able to run even without a ground line. Although not as well, and while overheating the components without the 12v battery nor ground line connected.

   I believe, now,  that T-1000 is correct in saying that no one is totally sharing just exactly how their self running devices are working.
   For fear of the consequences, or due to the loss of monetary gain.  Sad, but possibly true.
   I suppose that it's all up to us now, as it always has been.
   I will however continue to be truthful and impartial in my results, be they positive or negative.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17302 on: June 04, 2017, 06:37:45 PM »
Verpies can also explain where that information and schematic came from, as well, if he chooses to do so, again.
I designed this circuit and I drew this schematic.

Keep in mind that although Itsu built the circuit correctly, according to directions from Verpies, it had very limited output at the bulbs.
Actually he had more output at the secondary of a yoke transformer than he wanted.
He experienced a low output out of his grenade coil.

So it seems the component, that determines the magnitude of the output, is the transformer - not this driver circuit.

But, I believe that it came from the William McFreely PDF file, which I've since lost. It dealt with a different subject than energy from the Aether, although I may be wrong, or partially wrong there. Verpies can best further explain it's source and purpose.
No, it is a generic driver circuit invented by me to avoid losing the energy contained in the inductive spikes, as heat in dissipative snubbers and instead recycling it back into the power supply.  The spike energy can destroy transistors. This circuit is not a FE circuit but it could be a part of one.

McFreey Modus Operandi relies on shaped orthogonal AC and DC magnetic fields in a spool device containing copper or brass as the gain medium in which beta current is stimulated.  It does not rely on the lossless clamp driver.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17303 on: June 04, 2017, 07:01:57 PM »
Good day all:

Well, I posted my question and then Itsu answered it before I made the post.......

so Itsu, the remaining question is,  seeing that you used the tracking gen. to get the Resonant frequency for your Grenade configuration:  If you *pulse* the Grenade with *white_noise* or some similar broad spectrum signal, do you get peaks corresponding to the same tracking generator *dips*?

Thanks in advance,

take care, peace
lost_bro


lost_bro,

here i use my old method of determining the resonance frequencies of the grenade.
I have my FG loosly coupled with the grenade by a cliplead wire wrapped 2 turns on the thickest part of the grenade
I sweep the FG in 10s from 10Khz to 10MHz, so we see on the scope this frequency range at 1Mhz /div.

It shows roughly the same dips as with the SA, but now as amplitude peaks at 950Khz, 1.7Mhz and 2.6Mhz.

Moving the FG coupling point has some influence on these peaks, so i consider the SA method the better one.

Regards Itsu

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17304 on: June 04, 2017, 07:29:32 PM »
Hi Ape,

nice setup you have, but still some remarks if you don't mind.

You mention to have to connect the clamp wires reversed and that you might have the wrong schematic.
I doubt there are wrong versions around, so perhaps you can show which diagram you have followed.
The version i know of and which i have successfully followed was shown here:

http://www.overunityresearch.com/index.php?topic=1526.msg33035#msg33035    (use firefox to chrome to show the diagrams).

Another remark is about the used big electrolytic capacitors (i understand you use them as C3 and C4 in the above linked diagram)
They are not good performers at high frequencies, so they should be paralleled by some film like capacitors (i use 10nF silver mica caps)

Finally, the long wires used in your setup.
Both for going to the yoke and also between the MOSFET drivers and MOSFETs.
The extra wiring builds up stray capacitance and inductance causing unwanted oscillations etc.
Keep them as short as possible.
I personnaly fix the drivers to the MOSFET leads by soldering the drivers ground leads directly onto the MOSFET source lead.
Good luck with you experiments.

Itsu


Itsu,

Thanks for the comments.
Improvement is always welcome,  so keep the comments going.

Yes,  thats the same version i have used.

To clarify the connection of the clamp i added a picture... i checked it double, but connecting it as in the circuit, the clamp will effect my gates and both FET's fire at same time.
So it cost me a couple of days trying to improve my push pull circuit ,......but at the end Lost_Bro suggested to reverse the clamp.
So i did and the results you have seen on my vid.

So its not my intention to say Verpies circuit is fault, but maybe or better there must be a explanation why i have a good clamp effect in reversed connection.



Also thanks for the S.A. protocol, again some usefull tips.
As i am analysing lots of grenades these days lately and see a lot of different resonance points in different sorts of grenade configurations.
Even the types which are not regular circulating on forums etc. have potential.


Greetings



zalmoxis

  • Newbie
  • *
  • Posts: 39
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17305 on: June 04, 2017, 08:57:50 PM »
Good day !
I have came across 2 videos and i want to share them with you .. probably is just "old news"
https://www.youtube.com/watch?v=poC07RRRCfo
https://www.youtube.com/watch?v=3WUPIWmE-SQ

He is not using a "standard" grenade , The length of the wire is 56 m.
In the first video he is exciting the inductor with a signal generator, he found a frequency sweet spot where he gets "bubbles" on the output of the grenade, around 15.43kHz.
In the second video he has replaced the signal generator with the push-pull, yoke, series cap and he found again the "bubbles" in the system. But using the yoke that effect is dependent on the PSU voltage.
The grenade has no tesla coil connected, so this effect is not dependent on some pulser ..
I don't know who the guy is or what he accomplished.
I don't have access right now at the workbench, I want to ask if anyone have found the same bubble effect  on the grenade or on the inductor.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17306 on: June 04, 2017, 09:40:52 PM »

Itsu,

Thanks for the comments.
Improvement is always welcome,  so keep the comments going.

Yes,  thats the same version i have used.

To clarify the connection of the clamp i added a picture... i checked it double, but connecting it as in the circuit, the clamp will effect my gates and both FET's fire at same time.
So it cost me a couple of days trying to improve my push pull circuit ,......but at the end Lost_Bro suggested to reverse the clamp.
So i did and the results you have seen on my vid.

So its not my intention to say Verpies circuit is fault, but maybe or better there must be a explanation why i have a good clamp effect in reversed connection.



Also thanks for the S.A. protocol, again some usefull tips.
As i am analysing lots of grenades these days lately and see a lot of different resonance points in different sorts of grenade configurations.
Even the types which are not regular circulating on forums etc. have potential.


Greetings


Ape,

i am lost as to how you have connected your circuit now.
It looks to me you have +24V on the minus terminals of the big electrolytic caps, but that cannot be thru.
So perhaps you could modify the diagram as presented by Nick to show your new connections.
Otherwise good luck with this setup as it seems to do what it suppose to do.

Itsu

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17307 on: June 04, 2017, 11:26:37 PM »

Ape,

i am lost as to how you have connected your circuit now.
It looks to me you have +24V on the minus terminals of the big electrolytic caps, but that cannot be thru.
So perhaps you could modify the diagram as presented by Nick to show your new connections.
Otherwise good luck with this setup as it seems to do what it suppose to do.

Itsu


Itsu,

The only change is the connection of the clamps.



Regards

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17308 on: June 05, 2017, 12:51:31 AM »
   Itsu and All:
   Perhaps you can help me out, if possible. As I'm still having mayor problems with my set up, and I can't seen to find the cause. At one time you helped me with my Mazilli circuit overheating, and now I have a similar issue, but with the TL494/Tc4420 drivers.
   To explain how I have things connected:
   I have connected the positive rail of my 24, 10A PSU directly through the choke and then going to the center tap of the yoke. The primary coil of the yoke going out to the center pin of the three pin IRFP260P mosfet. And the negative rail of the PSU to the right pin of the mosfets. Is that correct? Or not?
   I have also connected the 1000k resistor as well as the facing 18v zener diodes between the left pin of the mosfet (gate) and the right pin of the mosfets.
   I also have the MUR1530 diodes going from the right pin of the fets to the center pin. This with the diodes facing me, as well as the fets.
   If needed I can post a close up of my driver circuits, or anything else on the device which may help. I just can't see what I've done wrong. But, this thing has gone haywire, (and me too) even without the yoke connections from the yoke primary to the fets disconnected, to see if the fets stay cool when I try this test, which they do stay stone cold.
  It must be something simple, but I've spent much time overlooking the cause of this frustrating situation.

  Verpies: Thanks for the correction as to the lossless clamp circuit. I may have to make one myself, If I can't get this fet overheating problem solved, before I pull the rest of my hair out. As it is acting like a short circuit, while yet, I can still light some bulbs. But, I have no output on my 3t coil circuit at this time.



  EDIT: Verpies, at one time I mentioned what I had read about the TC4420 mosfet drivers from their data sheet concerning their function of impeding the fets from being both on at the same time. You mentioned that their job was not that, but to add current to the fets, instead.
   Below is the description you posted from the lossless clamp, point #5:
   "Pins #6 of the UCC27511 drivers (U1 and U2) are used to ensure that two power MOSFETs (Q1 and Q2) are not conducting both at the same time. The voltage on pin #6 must be above 2.4V in order for the driver to be enabled (this happens only when the opposite MOSFET stops conducting. This is sensed by R6 and R8)".

   So, I ask you again, is that not the same function provided by the TC4420 fet drivers, besides providing additional current to the mosfets?
   And could this be why apecore's fets are now not firing at the same time, along with the lossless clamp, as they were previously.
   My fets are still both on at the same time, at times. Depending on the duty cycle, and frequency controller settings.
Varying the setting by only slightly on my device, can cause them to both fire at the same time, still.
   
   

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17309 on: June 05, 2017, 03:39:33 AM »
  Post deleted, I will wait to see if there is any replies to my last post.
« Last Edit: June 05, 2017, 08:05:23 AM by NickZ »