Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718137 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17175 on: May 13, 2017, 02:29:43 AM »
  Ed:
  That cap got hot one day a while back, from me reversing the polarities, but it didn't burst, it just got hot and bulged the top a bit.
I read on my meter that there was 15v going the drivers, so there's no over-voltage there. But, it would still be good to replace that cap, anyway, just to be sure that it's not faulty.  I'll also check the gates signal using a 12v battery, to see it the signal cleans up, as there is no AC noise in the signal from a battery. But, there's always some stray AC from the grid on the floors tables, etz... especially in my salty, humid climate.

  T-1000: I'll let you know about how it goes with my gate signals with my yoke disconnected, tomorrow.  Here, it's all done tomorrow...
when possible.
  Just kidding,  but I'll check.

   I just watched apecore's previous video, the video in answer to Hoppy's questions concerning having one or two fets on.  And I can see that he was getting the same effects on his scope as I'm seeing. And, he WAS getting the sync when turning on his Kacher. With both or even just one of the fets running.  Interesting.

   So T, what's new and exciting with your or Geo's set up? It would be good to see some scope shots from Geo's device sometime,
to see what his signals look like. Something he has not shown, lately,  when possible.

   This thread had gone dormant, so I thought I'd wake it up, again...

   
   

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17176 on: May 13, 2017, 03:06:54 AM »
Nick,
Your scope shot shows your yoke drive signals are not proper duty cycle down to about 25% each rather than 50/50. When the katcher fet fires it is the designed to be during the fet drive of the yoke which at only 25% you might miss it so start at 50/50 then you cant miss it on timing.  Also there are frequencies that will be wildly out of control like that. Sweep the drive frequency around until you find a stable area. You scope sync knob will also need to be played with as the waveform changes. 25-30 khz area to start then sweep around.  My fet were more likely to blow at lower than 20 khz ranges.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17177 on: May 13, 2017, 03:26:16 AM »
look closely at the drive signals and how the katcher firing stops the yoke drive signal. Which make the katcher circuit a pulse width control. No real power is gathered from the katcher circuit its 98% the yoke drive but its needed to modify the duty cycle.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17178 on: May 13, 2017, 03:27:46 AM »
This is before power on main ouputs. everything else is the same as above but notice the pulse width change.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17179 on: May 13, 2017, 05:37:51 PM »
Nice display, are the lamps LED and aren't the wires from your drivers to your coils rather long......
I'm not so sure 50% 50% drive won't destroy the effect. Although who am I, but just a few things I have noticed.

Also is the TX power supply powering the device or feed back power?

kind regards  AG

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17180 on: May 14, 2017, 01:44:01 AM »
The atx computer power supply is only powering the 5 volt ICs. Its only 50 /50 drive until the Tesla circuit kicks then the side effect shuts off the active yoke drive fet. Tesla drive signal is more of a control mechanism of pulse width not a power contributor. Look at scope shots. No the lamps are not led they are all 60 or 40 watt incandescent bulbs.  The top trace representing the pulse width reduction on yoke drive caused by the bottom trace firing and ringing the bell sorta speak of the tesla circuit at 1.25mhz.  My point is the fet of the yoke must be on at the time the bell rings or it wont happen.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17181 on: May 15, 2017, 03:42:26 PM »
  Bat1Robin2:
  Your bulbs still look pretty dim. So, whatever effect the Kacher is doing to your circuit, it does not seem to help much at the output.
It may be causing more of an interference to the signal, instead, as you have no control of the duty cycle when that happens.

   Last night I burnt out my 12 and 15v filters and voltage regulators on the TL494 board, from connecting the input reversed.
Oh well, just a little set back to fix what I just did. I hope that the rest of the TL board is still ok.
    I had tried switching (or reversing) the primary coil of the yoke to see what would happen, but I don't know yet, until I can get the voltage regulators replaced and working again. I do have a couple more of those regulators, and will replace the burnt out ones today along with a couple of the filter caps that exploded in my face. Sounded like a firecraker going off...

   T-1000: I disconnected the yoke connections to the TL494 circuit, and the TL board and fet drivers do produce a cleaner signal that way.
 But, I'll know more about that when I get the device working again.
   Below are some scope shots of the TL board signal, without the yoke connections. 

   

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17182 on: May 15, 2017, 08:45:34 PM »

   Last night I burnt out my 12 and 15v filters and voltage regulators on the TL494 board, from connecting the input reversed.
Oh well, just a little set back to fix what I just did. I hope that the rest of the TL board is still ok.
 

Hi Nick,

Place a diode in series with your voltage regulator supply when you replace them.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17183 on: May 15, 2017, 10:52:43 PM »
Hi all. Long time no talk. Have been really busy and haven't checked in here in a long while.
It's nice to see many people still hacking away at this puzzle.  :)
I read back a bit in this thread and it seems stivep visited Kapanadze again recently? If so, that sounds interesting...
Read something here from stivep about the Kapanadze process supposedly working via current amplification, and impulses
such as a sparkgap and earth ground being required, plus capacitors for energy storage  Hmm... Sounds like not much more info than
was being thrown around in the last few years? Narrowing it down like that that maybe helps keep things simpler however...

Anything new from Akula and Ruslan these days?
I saw that Ruslan has a newer video about 'fart pants energy' or something like that.  Sounds promising... ;D

P.S. Any indication the length of the earth ground wire may be critical in Kapanadze's setup,
or does it appear that any length of earth ground wire works in Kapanadze's setup?
Knowing if earth ground wire length is supposed to be important or not in Kapanadze's devices could help narrow things further...

All the best...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17184 on: May 16, 2017, 12:02:54 AM »
Hi Nick,

Place a diode in series with your voltage regulator supply when you replace them.

   Hoppy:
   Can you explain a bit as to just what the diode is supposed to do. And also, what type of diode do you recommend?
   Looks like the rest of my TL board is ok, just both voltage regulators and some of the filter caps blew out. However I only have a single 12v regulator left to replace the blown one, but I don't have any more of the 15v regulators. Which means that I have to order some, and that can take a while. Or I can run the TL board and fet drivers on just 12v, for now. Which is what I'm about to do.
   This happened after I reversed the yoke's primary connections to the fets. I wanted to see if there was any change in the way that the gate signals look on the scope. But, the reversing of the input polarity was my fault, again. That was the second time that I made that mistake.
   
   Stivep did not really add much to what is already known about the Kapanadze device. We need specific details, and schematics, to know just how the TK device works, and to be able to reproduce it. Of course, that is just what TK doesn't want us to do. At least not yet. Such a waste.
  Even having all the detail, it's still a bitch to get these contraptions to self run. Not for the faint of heart...

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17185 on: May 16, 2017, 12:24:30 AM »
@Nickz: Ok on all that. Yes, still sounds like a mystery... :)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17186 on: May 16, 2017, 12:49:31 AM »
Hi all. Long time no talk. Have been really busy and haven't checked in here in a long while.
It's nice to see many people still hacking away at this puzzle.  :)
I read back a bit in this thread and it seems stivep visited Kapanadze again recently? If so, that sounds interesting...
Read something here from stivep about the Kapanadze process supposedly working via current amplification, and impulses
such as a sparkgap and earth ground being required, plus capacitors for energy storage  Hmm... Sounds like not much more info than
was being thrown around in the last few years? Narrowing it down like that that maybe helps keep things simpler however...

Anything new from Akula and Ruslan these days?
I saw that Ruslan has a newer video about 'fart pants energy' or something like that.  Sounds promising... ;D

P.S. Any indication the length of the earth ground wire may be critical in Kapanadze's setup,
or does it appear that any length of earth ground wire works in Kapanadze's setup?
Knowing if earth ground wire length is supposed to be important or not in Kapanadze's devices could help narrow things further...

All the best...
Ever thought it could be a harmonic of the grenade tuned frequency 'wave' or fraction of it ?

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17187 on: May 16, 2017, 01:21:04 AM »
Ever thought it could be a harmonic of the grenade tuned frequency 'wave' or fraction of it ?

Yes, of course, and such an idea has been discussed here in the past...
I was kind of more wondering if Kapanadze had made any comments about that to stivep or in his
previous videos, or if anyone has noticed whether the length of the earth ground wire in Kapandaze's demos 
seems to be just fairly random or not...

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17188 on: May 16, 2017, 02:36:26 PM »
   Hoppy:
   Can you explain a bit as to just what the diode is supposed to do. And also, what type of diode do you recommend?
   

Nick,

The regulators are rated typically at 1 or 1.5A, so a 1A 1N4000 or similar diode in series with the supply will simply provide reverse polarity protection in the event that you accidentally reverse the supply to the regulators.

If you destroyed the regulators just by reversing the yokes primary connections, then its understandable as this would have spiked the regulators and caps if done whilst the yoke was powered-up. I assume that you are supplying the yoke primary direct from your source power supply and not from a voltage regulator?

The learning curve involves a fair bit of smoking.  ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #17189 on: May 16, 2017, 04:06:21 PM »
   Hoppy:
   Ok, thanks. 
   I'll get the regulators and filters replaced soon.  I already did replace them a couple of days ago, but with ones that I had burnt out previously. As I forgot to check them before doing so, as they looked new, but weren't. Me bad... it was late at night, and with low light levels. Oh well.
 But there was no smoke, the filter caps just exploded in my face.
   Anyways, I was able to get some interaction and sync from the Kacher to the induction circuit, before this happened. Which was the first time I've seen that with the TL board.  That's the good news.