Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718934 times)

bitbo

  • Newbie
  • *
  • Posts: 30
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16590 on: January 30, 2017, 04:18:27 PM »
I did not analyze it that deeply to notice the correlation with the Kacher waveforms.  I just peeked in here and noticed the unmistakable resemblance to saturation current waveforms.
If it correlates with other waveforms than all the more credit to your observational powers.
This is the classical picture of the voltage waveform vs. the current waveform in a primary winding of a saturating transformer driven by a sine voltage source.
In the primary of a transformer, the phase between voltage and current depends on the loading of the secondary.  Ideally, without any such loading, the primary V vs. I phase should be at 90º (zero real power).  With heavy loading, that phase approaches 0º.
The "antiphase" is just an artifact of scope probe connection.  If one probe was reversed then they would be in-phase.
Most likely that's it, but AFAIR there is also a ferro rod at the grenade.


To All,
sorry to warm up old things, but i came across this
video, which still is not clear to me: (see attachment)
- At the top scope shot the HF is not present
- At the middle scope shot the HF is present[/size]
- At the bottom scope shot, where he opened wide the x-axis one can see that it is not a oscilloscope sampling problem.


I am curious if that is influence from Kacher or another coil due to the fact that this HF influence
is not visible over the complete signal (just when voltage and/or current is present)


For me it looks like that there is some kind of HF interrupter in between ????


What do you think ?


bitbo

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16591 on: January 30, 2017, 05:06:40 PM »
Agreed Nick!

Please keep posts to topic.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16592 on: January 30, 2017, 10:44:35 PM »
Agreed Nick!

Please keep posts to topic.
Bitbo I think it goes unstable at peek current in your output driver stage try getting some caps across the top supply input of the coil and where your Emitter feed is got from and as close as you can or across it's feed. Big paper caps none electrolytic like 2x 4.7 mfd, and use ferrite sleeves on base gate drivers too.

Bitbo you can break the unit down as you test it with a scope like driving you grenade coil and scoping the output and seeing what you get, if all is well you might be able to see the harmonics at resonant frequency's if not it's not tuned up correctly.

that's what i think !

zalmoxis

  • Newbie
  • *
  • Posts: 39
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16593 on: January 31, 2017, 12:06:01 PM »
@NickZ This topic is not dead!
Guys here are some .. achievements

ok .. let's start .. push-pull has 2 or 3 sweet spots where is pushing energy into the inductor ..
i push what comes out from the toroidal transformer into the inductor coil thru 330nF i also tested with 100nF but lower capacity lower the BULB light is .. the grenade is built like this  2.5mm square wire 52:52:26:26:13:13  (38 meter wire and i have left UNCUT around 1.8-2 meters out of the grenade)  the inductor is built with same type wire 26:26:26 (19 meter wire) The grenade coil is not built like you do .. see attached image.
the inductor circuit is sucking around 500mA!! - 7Amps. When the bulb lights bright it is sucking 6-7Amps (without Tesla ON)
When i start tesla coils and start messing with the tesla potentiometers .. sync phase frequency .. etc .. nothing happens to the BULB .. i do get some more .. noise on the oscilloscope some spikes of higher voltage than the sine wave.
I also use a grund wire of ±15 meters of 4mm square copper wire.
Into the tesla i push 33 volt or 80 volt i have to output voltages from the DC/DC. When i push 80volt the ampermeter connected to the inductor starts showing dumb numbers .. if i connect my hand to ground wire .. the ampermeter show lower amps number with the same bulb output light .. interesting .. but i can not tell you that those reading amps numbers are true .. because of high static field in the room the multimeter can foul me.
The inductor coil is getting really warm/hot .. into some NOT MELTING limit haha. Grenade remains cold with bulb fully light @ 75watt incandescent bulb !!
I can not do any more tests without an oscilloscope with 2 or 4 inputs .. i will try to play with some microwave oven diode on the inductor or grenade .
What i've achieved is a working high frequency air core transformer  ;D
more experiments to be done with some new caps next week.

The oscilloscope images were taken from the output of the toroidal transformer with just a BULB load (no light, low voltage, high amps)

zalmoxis

  • Newbie
  • *
  • Posts: 39
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16594 on: January 31, 2017, 12:09:59 PM »
Grenade coil oscilloscope images with bulb fully bright

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16595 on: January 31, 2017, 05:42:16 PM »
This is a test rig I made to tune and peek a Tesla coil this coil is one I made to experiment with a few years a go now it likes 1.67 mhx aprox, i used a 74HS14 os osc with a 1nf tuning cap so i can get a base frequency of 432 hz multipal f of 8 and 9 and 432hz with no remainder  ;)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16596 on: January 31, 2017, 06:08:34 PM »
This is a test rig I made to tune and peek a Tesla coil this coil is one I made to experiment with a few years a go now it likes 1.67 mhx aprox, i used a 74HS14 os osc with a 1nf tuning cap so i can get a base frequency of 432 hz multipal f of 8 and 9 and 432hz with no remainder  ;)

Wonder what coil like this would do to the room air when Tesla interrupter is attached and tuned to the maximum ionisation around the coil... :) We require static the Tesla coil like from https://en.wikipedia.org/wiki/Van_de_Graaff_generator but in controlled fashion so the charges can be collected on the grenade coil.

Cheers!

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16597 on: January 31, 2017, 06:43:05 PM »
Wonder what coil like this would do to the room air when Tesla interrupter is attached and tuned to the maximum ionisation around the coil... :) We require static the Tesla coil like from https://en.wikipedia.org/wiki/Van_de_Graaff_generator but in controlled fashion so the charges can be collected on the grenade coil.

Cheers!
it's interesting you should ask that as if i put it  on it's side next to my grenade coil the static is absorbed by the other coil around the grenade and the resonant frequency drops to 1.2 mhz .

Also if I power the grenade seperatly and monitor the output i get 3 waveform harmonics just like the grenade shape but sine waves. But a different resonant f to the Tesla coil. (10m 5m 2.5m x2)

One question for you many rigs use old tv lopt for the static with a positive out thus an acceleration simulation in hight but this coil is fluctuating pos/neg ac wont that have a canceling effect ?

boonk

  • Newbie
  • *
  • Posts: 46
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16598 on: January 31, 2017, 09:21:14 PM »

boonk

  • Newbie
  • *
  • Posts: 46
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16599 on: February 01, 2017, 09:38:00 AM »
** his circuit -
« Last Edit: February 01, 2017, 11:38:06 AM by boonk »

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16600 on: February 01, 2017, 10:12:52 AM »
..new : https://www.youtube.com/watch?v=YkyeKCnzU3Y
Ok, circuit -
Hi,

Do he have video with self running demonstration?
Teaching others without showing device on demo video is not worth for spending lots of time while trying to replicate...

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16601 on: February 01, 2017, 12:45:44 PM »
Hi,

Do he have video with self running demonstration?
Teaching others without showing device on demo video is not worth for spending lots of time while trying to replicate...

One question for you many rigs use old tv lopt for the static with a positive out ''thus an acceleration simulation in height and of static potential one would expect'', but this type of coil is fluctuating pos/neg ac wont that have a canceling effect ?

steadyfield

  • Newbie
  • *
  • Posts: 38
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16602 on: February 01, 2017, 04:29:24 PM »
Hi, all!
I have finished the grenade coil with 37.5m 2.5mm^2 wire. And I'm gonna wind the 'induction coil' on the 2nd layer of the grenade with 18.75m 2.5mm^2 wire. Now I have three questions in related to the device.

1 - In regard to the 18.75m 'induction coil' on the grenade, I wonder how many layers are needed and how many turns for each layer are needed??? I have seen some schematics informing that there should be 2 layers for the induction coil while some other schematics showing that there should be 3 layers.

2 - How is the induction coil wound? As far as I know, there are 2 ways to wind the coil. The first one - wind the first layer as usual, and return to the start point of the first layer, then wind the second layer. Another way - wind the first layer, and then start winding the second layer from the end of the first layer. I wonder which way is correct.

3 - After I finish winding the induction coil, I wonder how I can test the natural resonant frequency of the grenade coil that I should tune the kacher for?

I would be appreciated if these questions were answered.

Thanks.


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16603 on: February 01, 2017, 05:47:37 PM »
Hi, all!
I have finished the grenade coil with 37.5m 2.5mm^2 wire. And I'm gonna wind the 'induction coil' on the 2nd layer of the grenade with 18.75m 2.5mm^2 wire. Now I have three questions in related to the device.

1 - In regard to the 18.75m 'induction coil' on the grenade, I wonder how many layers are needed and how many turns for each layer are needed??? I have seen some schematics informing that there should be 2 layers for the induction coil while some other schematics showing that there should be 3 layers.

2 - How is the induction coil wound? As far as I know, there are 2 ways to wind the coil. The first one - wind the first layer as usual, and return to the start point of the first layer, then wind the second layer. Another way - wind the first layer, and then start winding the second layer from the end of the first layer. I wonder which way is correct.

3 - After I finish winding the induction coil, I wonder how I can test the natural resonant frequency of the grenade coil that I should tune the kacher for?

I would be appreciated if these questions were answered.

Thanks.
Haw much cable in meters is on the first 2 layers ? do you know what that is ?


if all else fails down load this pdf.

https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FE2wEZhfsuwwDHsDFCDCclpygCN2fsMm4Jfscppreav0%3D%3A%2F%D0%A0%D0%B5%D0%B7%D0%BE%D0%BD%D0%B0%D1%82%D0%BE%D1%80%20%D0%B8%20%D0%B8%D0%BD%D0%B4%D1%83%D0%BA%D1%82%D0%BE%D1%80..pdf&name=%D0%A0%D0%B5%D0%B7%D0%BE%D0%BD%D0%B0%D1%82%D0%BE%D1%80%20%D0%B8%20%D0%B8%D0%BD%D0%B4%D1%83%D0%BA%D1%82%D0%BE%D1%80..pdf&c=589211f97a7c

steadyfield

  • Newbie
  • *
  • Posts: 38
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16604 on: February 02, 2017, 02:43:00 AM »
Haw much cable in meters is on the first 2 layers ? do you know what that is ?


if all else fails down load this pdf.

https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FE2wEZhfsuwwDHsDFCDCclpygCN2fsMm4Jfscppreav0%3D%3A%2F%D0%A0%D0%B5%D0%B7%D0%BE%D0%BD%D0%B0%D1%82%D0%BE%D1%80%20%D0%B8%20%D0%B8%D0%BD%D0%B4%D1%83%D0%BA%D1%82%D0%BE%D1%80..pdf&name=%D0%A0%D0%B5%D0%B7%D0%BE%D0%BD%D0%B0%D1%82%D0%BE%D1%80%20%D0%B8%20%D0%B8%D0%BD%D0%B4%D1%83%D0%BA%D1%82%D0%BE%D1%80..pdf&c=589211f97a7c


Hi,
There are approx. 53 turns  for the 1st layer and 52 turns for the 2nd layer.

Thanks for the link of Сергей STALKER schematic you posted. But as far as I know, the grenade coil configuration of STALKER differs from that of Ruslan/Akula's. For example the length of the induction coil from the STALKER is L/4 but for Ruslan/Akula's the length of induction coil is L/2 where L=37.5m . And the way the 6 layers grenade is wound also differs from Ruslan's, as is shown in STALKER's winding schematic. Currently, for the configuration of the grenade and its induction coil, I would like to focus on the Ruslan's configuration only. And those questions I asked are for the Ruslan's configuration rather than STALKER's.

Thanks anyway.