Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715936 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16410 on: December 28, 2016, 07:45:36 PM »
OK. Thanks Geo.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16411 on: December 29, 2016, 12:58:53 AM »
OK. Thanks Geo.
Geo Hi one question I have to ask, while I was doing some experiments I noticed a lot of heat from my original grenade coil wound with PVC insulated cable on PVC drain pipe ;) (cheep job) I was wondering how or what did you use to wind your device on ?

It might be an idea to use a postal tube but i don't think they supply in small quantities.  Other wise the unit will die of short time sag and i wouldn't wish that on any one  :D

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16412 on: December 29, 2016, 06:00:14 AM »
Hi Tomtech

Can you describe with a few words how does he modulate his output? I speak about the attached video. Thanks
Hi
As we see the arrangement of the circuit kacher we have two kinds of operating mode:
- One of them is known as the multiplier voltage number of consecutive windings and the number of windings is reduced frequency and vice versa.
Thick wire coil primary winding CCw a secondary winding Cw , while the lower portion It has a positive pole (which it is a permanent positive power source) while a negative portion thereof is broken.
in short, we get oscillations where we see the form of a sinusoidal signal near the coil.
- the second mode : obtaining electromagnetic field (would compare to the concert stage where the microphone is placed near the speaker called a loop feedback) :D
in the case inverts the polarity of the primary winding,but that's not all it is also necessary kind of loop conduit extending inside the tube "I guess that is part of the drain current" Let's go back to the primary coil
the number of windings is not accidental by reduction of the gap between the windings tune the length wave , On the oscilloscope we see the nature of the modulation commonly called fish
 We will also need use a radio receiver will serve as a monitoring or detection,should be able to hear the squeal at a given frequency.
 I realize that my description is unprofessional excuse me I tried but I is not getting for the better :D
Does anyone of you has already carried out this type of experience and what do you think?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16413 on: December 29, 2016, 11:25:20 AM »
Hi Hoppy,

Mains earth wire is completely disconnected from PSU 24V in the recording. Only Phase and Neutral are used to power it.
Ground ( Earth ) is another pin of 0.5M in.
Even asked a cousin to bring a  Back up UPS for the test last night, not connected to mains, just from backup battery operation.
Ground connection of UPS was as well disconnected. It as well and getting the awesome results.

Geo,

If you are able to use the UPS again, try raising or lowering it to various heights above ground with wood blocks or cardboard boxes to fine tune / vary lamp brightness.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16414 on: December 29, 2016, 11:53:50 AM »
Geo,

If you are able to use the UPS again, try raising or lowering it to various heights above ground with wood blocks or cardboard boxes to fine tune / vary lamp brightness.
Hoppy are you going to put yours in a tree house or use it on a hover craft ? :D I know ask him for a guarantee !  ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16415 on: December 29, 2016, 12:22:21 PM »
Hoppy are you going to put yours in a tree house or use it on a hover craft ? :D I know ask him for a guarantee !  ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D

You sound well fuelled and firing on all cylinders Alien.  ;D ;)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16416 on: December 29, 2016, 12:59:29 PM »
I realize that my description is unprofessional excuse me I tried but I is not getting for the better :D
Does anyone of you has already carried out this type of experience and what do you think?

Your description is fine ;)
I find interesting any technique that induces beats at low frequencies. There is something on to it. Ruslan tunes with a similar manner his grenade. Beats show sw interaction. I wonder if this behavior has to do with the cw ccw grenade winding direction. Even if it is one wire, they are two different coils with two different self resonant frequencies. A slight variation in length will give a slight frequency difference. This difference will be shown as a waveform modulated by this difference (beat). It looks like that this beat is an evidence of the right tuning.       

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16417 on: December 29, 2016, 02:35:11 PM »
Geo,

If you are able to use the UPS again, try raising or lowering it to various heights above ground with wood blocks or cardboard boxes to fine tune / vary lamp brightness.

Hoppy,

I managed to do the test, No difference observed.
All sorts of heights tested.
Even placed it on the part flat roof of my house and still operating.

Today will be trying it out with the Akula version Kacher which i have shown in vid.
It will be sharing the signals of Push-pull driver on the outputs of IR2110.
Lets see how this one works :).

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16418 on: December 29, 2016, 02:39:23 PM »
Geo Hi one question I have to ask, while I was doing some experiments I noticed a lot of heat from my original grenade coil wound with PVC insulated cable on PVC drain pipe ;) (cheep job) I was wondering how or what did you use to wind your device on ?

It might be an idea to use a postal tube but i don't think they supply in small quantities.  Other wise the unit will die of short time sag and i wouldn't wish that on any one  :D

Hi AG,

My first grenade was wound on normal water PVC 50mm diameter.
the PVC at the very end where there the wires come out became brittle because of heat some time ago.
but still good. 
New Grenade is of same diameter but of a much better heat resistant PVC.
I think Carbon Fiber tubes like that will be the best to handle this situation if it becomes hot inside.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16419 on: December 29, 2016, 03:36:48 PM »
 Hi, AG
You can stick cardboard on PVC pipe but beware that it will increase the thickness of  the pipe and you will change the parameter of the coil.
You can glue paper or cardboard or prespaper on PVC pipe for secondary Tesla and Grenade coil, will have a high frequency .
You can use this calculator:

http://gorchilin.com/calculator/reactor?l=40&d=1.5&D=50&L=0.25&G=1&C=0&E=1&dt=0

I had a surprise in my case , the wire was 2.4 mm Sq not 2,5 and the PVC pipe was 1,6 mm thickness not 2mm like Ruslan device.

  the most important is if you use the calculator is that two lines on the graph to meet.
  so, measure copper wire without insulation and with isolation, measure PVC tube thickness, use the computer and see if it is closer to reality

This is the graph of my coil:


Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16420 on: December 29, 2016, 04:31:01 PM »
I think Carbon Fiber tubes like that will be the best to handle this situation if it becomes hot inside.

Dear GeoFusion.

Hmmm.... Perhaps not !

Carbon is electrically conductive it would severely reduce the coils " Q " factor.

Kind regards, Graham.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16421 on: December 29, 2016, 04:51:28 PM »
I think Geo refer to   cardboard not carbon  fibre !!!

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16422 on: December 29, 2016, 05:00:12 PM »
Hoppy,

I managed to do the test, No difference observed.
All sorts of heights tested.
Even placed it on the part flat roof of my house and still operating.

Today will be trying it out with the Akula version Kacher which i have shown in vid.
It will be sharing the signals of Push-pull driver on the outputs of IR2110.
Lets see how this one works :) .

Thanks for trying that Geo. It would make no difference with a mains connected PSU or UPS but should with just a battery powering the device. However, the battery cannot be lifted and held at various heights in hands and would need to be raised and supported on dry wood blocks or cardboard boxes. Your roof would also not be a suitable support as its footprint to ground is huge. The object of this exercise is to look into the possibility of capacitance from ground to battery providing a return path for HV / HF current, not as you appreciate, a practical method for tuning. If absolutely no difference was seen to the waveform when scoping (mains isolated) across the lamp, then this IMO would be a significant observation.

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16423 on: December 29, 2016, 05:01:43 PM »
Hi, AG
You can stick cardboard on PVC pipe but beware that it will increase the thickness of  the pipe and you will change the parameter of the coil.
You can glue paper or cardboard or prespaper on PVC pipe for secondary Tesla and Grenade coil, will have a high frequency .
You can use this calculator:

http://gorchilin.com/calculator/reactor?l=40&d=1.5&D=50&L=0.25&G=1&C=0&E=1&dt=0

I had a surprise in my case , the wire was 2.4 mm Sq not 2,5 and the PVC pipe was 1,6 mm thickness not 2mm like Ruslan device.

  the most important is if you use the calculator is that two lines on the graph to meet.
  so, measure copper wire without insulation and with isolation, measure PVC tube thickness, use the computer and see if it is closer to reality

This is the graph of my coil:

Good day Conico

Damn fine job............ this is the resonance *within* resonance or -double resonance- which many have spoken of........

Question:  How did you relate the Total length(802mm) given in the Calculator results  (single layer solenoid - one direction winding) and apply it to the Grenade coil (multi-layer solenoid- with reverse windings)?

I will attach this US patent ............. again................

This patent pretty much sums-up whats really going on here.........just imagine a multilayer solenoid in place of the Flat reactor coils in the patent.

take care, peace
lost_bro

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16424 on: December 29, 2016, 05:39:30 PM »
Hi AG,

My first grenade was wound on normal water PVC 50mm diameter.
the PVC at the very end where there the wires come out became brittle because of heat some time ago.
but still good. 
New Grenade is of same diameter but of a much better heat resistant PVC.
I think Carbon Fiber tubes like that will be the best to handle this situation if it becomes hot inside.
Thanks for the information both Geo and Conico  :D ;)

Any one seen this ?
We need one in Russian!
« Last Edit: December 29, 2016, 10:52:03 PM by AlienGrey »