Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715668 times)

Ed morbus

  • Full Member
  • ***
  • Posts: 131
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15990 on: November 22, 2016, 06:50:14 PM »
Thanks for the New Video Wesley

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15991 on: November 22, 2016, 07:39:58 PM »
Does anyone know how this transformer (yoke) was reeling? There are cw and ccw windings? The picture is from Adrian's movie.

Hi Conico,

If we see that yoke from center tap on that pic,
we see coil from centertap go CCW left and to the right from tap is CW.
This is but just another way how to use yoke core configuration I see here. all forms are welcome.
In pic, 3-4Turns is ment to connect to Inductor on top of grenade. ( primary  on Grenade)
And there is 28T as we know also on the yoke.
on a Russian Blog of Adrain which is now private, sadly...
He was telling he used 37.5meters grenade.
on recent videos talks about Kacher's freq is about 2mhz.
Ofcourse every land is different from  the other so the tuning will be a bit different , but not much.



conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15992 on: November 22, 2016, 07:54:32 PM »
 so,  I can try cw ,ccw winding on my yoke. In that picture are 6 turns cw and 6 ccw and  the middle goes to +12v and then are 28 turns and 3 turns. I will try that winding.
 Thank you!

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15993 on: November 22, 2016, 08:01:01 PM »

 My thought is to introduce the microprocessor into the signal generation portion of these devices so that all combinations can be explored quickly, perhaps even charted and the elusive overunity effect can be triangulated thru data charts. or maybe not.

Bat1Robin2,

My thought even further,...for instance using Rasperry or E_blocks  for control and measurement.
Making the whole system based on microcontrolling.

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15994 on: November 22, 2016, 08:12:22 PM »
so,  I can try cw ,ccw winding on my yoke. In that picture are 6 turns cw and 6 ccw and  the middle goes to +12v and then are 28 turns and 3 turns. I will try that winding.
 Thank you!

Try it, let me know how it works. ;)
28T  are same direction of 3T coil.

Edit*
Adrian guska's coil is 37.5m
18.75M 3 layer inductor.
enjoy.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15995 on: November 22, 2016, 11:31:06 PM »

The advantage of McFreey's  MO over Tk, Ruslan, Akula's is that the former is based on proven phenomena such as:
1) spin axis polarization by magnetic field,
2) directional polarization of beta decay products emission,
3) induction,
4) and Lorentz confinement of charges particles.

The only component of his theory that is not proven is the stimulated emission of fast electrons (a cascade event).


f..k someone just took all of the thought out of my brain and placed it here:
http://www.free-energy-info.tuks.nl/McFreey.pdf

and that was after Lithuania experiment( with ferrite - means with  no eddy current  flow in one piece of metal as ferrite is made out of metal filings in billions electrically and mechanically insulated particles
I need to analyze it deeper....................... so far no comments.
Thank you

Wesley


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15996 on: November 23, 2016, 01:14:17 AM »
Bat1Robin2,

My thought even further,...for instance using Rasperry or E_blocks  for control and measurement.
Making the whole system based on microcontrolling.
He, He! tried it with a pic, it will modify your code and do strange things, try it in a lead box !!!

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15997 on: November 23, 2016, 01:21:07 AM »
Try it, let me know how it works. ;)
28T  are same direction of 3T coil.

Edit*
Adrian guska's coil is 37.5m
18.75M 3 layer inductor.
enjoy.
Geo what if you fired both Fets at the same time like this ____¬___¬  at your 1.7mhz rate or do you think that's what's going on ?  just a thought.

AG

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15998 on: November 23, 2016, 02:14:53 AM »
   Conico:
   Adrian was using a 12v system, if you are going to use a 24v system, you'll need to make twice the number of turns, 12, and 12 turns. Or at least 8 or 10 on each side of the center tap, depending on who's set up you are going to try to replicate.
   
  My yoke is 12, 12 primary, 28t secondary, 3 turns (other) secondary, 24v system. All coils wound clockwise. When all coils are on, the diameter is 3 1/2 inches wide.

  Hoppy:  I just checked on my system, and there is a small change in frequency when the Kacher circuit is turned on, as compared to when it's not on. Slightly higher frequency is noticed. However, the voltage does go up substantially, with the Kacher's interaction.
No spikes noticed on my scope, even with no earth ground line connected.

   Verpies: Can you explain what you mean by using the magnet on a stick, to test what exactly?
I understand about the hand affecting things, but not sure what the magnet test would prove. 
  Once I tune the yoke coil's frequency using a magnetite magnet on the core, I no longer hold it, so my hand is not near the device.
  I thought that the NMR resonant frequency needs to be much higher, than what we are dealing with on these devices. As the induction circuit is running at about 15-28KHz, and Kacher frequency around 1 to 2 MHz. Does NMR work at those frequencies?
   

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15999 on: November 23, 2016, 02:48:30 AM »
f..k someone just took all of the thought out of my brain and placed it here:
http://www.free-energy-info.tuks.nl/McFreey.pdf
Be aware, that two versions of these papers exist.
1) Older, based only on NMR
2) Newer, based on NAR


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16000 on: November 23, 2016, 03:20:37 AM »
Verpies: Can you explain what you mean by using the magnet on a stick, to test what exactly?
I understand about the hand affecting things, but not sure what the magnet test would prove.
NMR can be proven/disproven by bringing a strong nonconductive permanent magnet to the working device on a long plastic stick (not a hand).  The conditions for NMR are usually very narrow, so external magnetic flux will disturb them and the device will stop working  immediately.

As the induction circuit is running at about 15-28KHz, and Kacher frequency around 1 to 2 MHz. Does NMR work at those frequencies?
Yes, because the NMR Larmor frequency depends on the magnetic flux density and material.
In Earth's weak magnetic field the EFNMR frequencies are around 40Hz and in the presence of stronger artificial magnetic fields the NMR frequencies are in the kHz to MHz range.

The FWHM frequency of the nuclear resonance is very narrow (5ppm for Zinc, 100ppm for copper) and can be easily disturbed by bringing a permanent magnet in the vicinity of the gain medium. 
Which also gives us a way to locate the gain medium in a working device.

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16001 on: November 23, 2016, 03:58:41 AM »
https://youtu.be/zXuWHQ0wSRk

Wesley

Good day Wesley

Thanks for your time and effort, always appreciate your video translations.
Looks like this one is the real deal..........

take care, peace
lost_bro

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16002 on: November 23, 2016, 09:59:20 AM »

  Hoppy:  I just checked on my system, and there is a small change in frequency when the Kacher circuit is turned on, as compared to when it's not on. Slightly higher frequency is noticed. However, the voltage does go up substantially, with the Kacher's interaction.
No spikes noticed on my scope, even with no earth ground line connected.


Thanks Nick. This is what I observed back when I had my system up and running. I think the slight change of frequency is due to the loading on the Mazilli. With the push-pull setup, I found the 'effect' much enhanced, where I could cleanly turn the bulb fully on and off just by hand movements. Investigation into this showed that push-pull gate and drain waveforms were badly distorted and spiked. The mosfet driver supply rail, as in most of the published circuit schematics, is from a linear 3-pin voltage regulator, which in turn is fed from the main PSU. When I isolated this supply from the main supply rail and star grounded the two supplies, the waveforms  improved considerably.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16003 on: November 23, 2016, 01:13:53 PM »
Thanks Nick. This is what I observed back when I had my system up and running. I think the slight change of frequency is due to the loading on the Mazilli. With the push-pull setup, I found the 'effect' much enhanced, where I could cleanly turn the bulb fully on and off just by hand movements. Investigation into this showed that push-pull gate and drain waveforms were badly distorted and spiked. The mosfet driver supply rail, as in most of the published circuit schematics, is from a linear 3-pin voltage regulator, which in turn is fed from the main PSU. When I isolated this supply from the main supply rail and star grounded the two supplies, the waveforms  improved considerably.
Hoppy your a Starr, I bet you only come out at night  ;D ;D

Mean while i'm trying to plug this idea!

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #16004 on: November 23, 2016, 04:33:31 PM »
Hoppy your a Starr, I bet you only come out at night  ;D ;D

Mean while i'm trying to plug this idea!

Like a glow in the dark?

AG,
Your Plug_me,.. as i can see on the picture you are charging caps with the negative puls from the secondairy tesla by rectifying it.
The sparkplug will puls the antenna coil adressing the emf puls at the grenade?
Did you synchronised your spark frequenty with the pushpull frequenty/ grenade resonance frequenty?

Modif: 16:54:.. AG, the car sparkplug has a internal resistance this might reduce your spark intensity.