Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719166 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15570 on: November 01, 2016, 05:32:12 PM »
  Hoppy:
   I'm not trying to reduce any output on the push-pull, it's working ok, it's just the amount of voltage and current now going through my full bridge which is connected to the 28t coil, that leads to the Kacher's input. Now the Kacher's input can get too high, and is burning up some components on the Kacher circuit. I need to control the input to the Kacher, but not by dropping the push-pull's output.

   What I've seen in most all the homemade push pull TL494 controller boards, is that the output at the bulbs is reduced and limited to about 120w, or so.  From the 24v, 5A, draw from a PS or batteries, such as what Geo is showing. 
   
   I don't know what my induction circuits is drawing, as the idea is to make it self run, regardless, even without limiting controllers.
   The Mazilli is running without controller restrictions, and with no heat build up on the circuit components. 
   Later, I'll see if a TL494 board to fet driver type circuit really works any better. After new years, or so. 
So far, that has not been the case with our members, here, as they are all showing low outputs, low lumin levels, and no OU. Besides unstable operations, caused by possible HV interference, and not one self running, as yet.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15571 on: November 01, 2016, 05:57:39 PM »
   Hoppy:
   Yes, proper choke levels, are what I'm looking into. So far I've replaced two different chokes (of the one board chokes) to a bigger toroid choke with thicker wire coils turns. Which did help to control the previous overheating of that choke. Now the Kacher's 25v 1000uf cap blew it's top, though, and will need replacing. Still too high a voltage going to the Kacher circuit, it can handle 24v, not much higher.
 I also have another 3/4 inch yellow choke with 8 turns on, after the full bridge rectifier capacitor, which is going to the Kacher.  Need a bigger choke?  I also placed another 1 inch choke at the Kacher input, with 12t on it.  But, I've removed it, afterwards.
Maybe I need to put it back.  At one point I was obtaining 1 inch streamers at the antenna coil... which further did some damage to the grenade coils next to it.  So, I need to tone it down a bit...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15572 on: November 01, 2016, 06:17:18 PM »
Without PWM control and pulse timing it is enough to place 1 additional transistor on base of the katcher transistor then output of it goes to the ground. When this transistor will be turned on the katcher will stop. This is what was seen in Andrian's katcher circuit with extra transistor in middle of PCB.

   T:  Adrian's Kacher is showing no signs of having PWM controller and pulse timing. So, how is he doing it with just a transistor?
Or is he?   Is there any schematic or diagram of his set up showing his Kacher circuit posted yet?

   Does anyone have the photos of Adrian's system?  I saw some very clear pictures of his system posted here a while back and I'd be interested in downloading them, if possible.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15573 on: November 01, 2016, 06:45:18 PM »
   Hoppy:
   Yes, proper choke levels, are what I'm looking into. So far I've replaced two different chokes (of the one board chokes) to a bigger toroid choke with thicker wire coils turns. Which did help to control the previous overheating of that choke. Now the Kacher's 25v 1000uf cap blew it's top, though, and will need replacing. Still too high a voltage going to the Kacher circuit, it can handle 24v, not much higher.
 I also have another 3/4 inch yellow choke with 8 turns on, after the full bridge rectifier capacitor, which is going to the Kacher.  Need a bigger choke?  I also placed another 1 inch choke at the Kacher input, with 12t on it.  But, I've removed it, afterwards.
Maybe I need to put it back.  At one point I was obtaining 1 inch streamers at the antenna coil... which further did some damage to the grenade coils next to it.  So, I need to tone it down a bit...

Its the two halves of the choke in the Kacher circuit, not the push-pull that conico and I are referring to. Your Kacher' cap needs to have a much higher voltage rating. Its the current that's causing your transistor to get hot. This is where the chokes help to limit the peak currents.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15574 on: November 01, 2016, 06:50:00 PM »
question to Wesley:
Quote
"I make a note that you never answer my key question about why these ex-USSR replication do require earth-wire connection to obtain the effect, why they do not 3rd party witness test running say 500W during 6 hours non-stop and why they do not inside Faraday cage" the answer is counterpoise.:

Good point.
My theory was never finished to the point of consistent leading  concept. 1/4 wavelength  needs  counterpoise.
Body of car antenna is a balance -counterpoise to that antenna.  if you want to radiate you need to resonate at first.
 That would make sense when talking about  electromagnetic wave RF. 
Nature needs balance. electron has mass. Mass in motion can  have inertia. Inertia can only exist if there is not constant acceleration but e.g: it is stimulating impulse from nanosecond generator that allows that inertia to be present.

 
 
So electrostatic pump  is the pump where major  attraction to the ground electrons is  done by electrostatic high voltage potential.
The stimulating impulses are delivered from nanosecond generator
The accumulation of initializing force energy is done by  electron motion ,
The initializing force  comes from our battery  in that first second  interval of time.

 
Similar to 15 girls pushing car till the point  where that car in motion  needs only one girl and than one finger of   that girl to compensate he losses
the load( light-bulbs) are  connected to secondary winding of a transformer  where first winding of that transformer is connected between ground and nanosecond generator impulses HV output.
That transformer is our resonance circuit ( series resonance LRC circuit )- lets call it RLC
However  because the secondary winding of that transformer is coupled to that   primary LRC circuit in Near Field
by  ferrite core  than whatever the change is present in that secondary winding  it impacts back by BEMF  the stability of   RLC circuit.

In a simple language flickering of the lightbulbs  due to instability is caused by changes of LRC  in that circuit during  given time frame .

 

 
So the key for TARIEL KAPANADZE , Ruslan Akula  Adrian Guska was to use tungsten based incandescent light bulbs as a load.- as  such load parameters  changes only at first  milliseconds when load is getting hot. 
In most of the cases the battery is still connected to the device and experimenter has full control over changing parameters of resistive R component of secondary winding resonance circuit   parameters.
 
That was only not so clear . with latest  device. made by Adrian Guska
By that we may think of the reason why Guska decided to  screw in lighbulbs  only after he started  the device.
Interesting  is that Adrian Guska had a problem with stability, when the last lighbulb was connected..
That conforms the fact that  system has reactive  character. To much of  R  in RLC circuit changes circuit parameters..

Russians do not test it inside Faraday cage"  because they are Russians  they do not have Faraday
Cage.
Also there is no way on you tube to present the device for 6 hours.
Interesting is that Akula and Ruslan refused my offer to visit them and conform that their devices work as desired
Adrian Guska told us that so far he has to much problem with SBU. But I spoke to him only few days ago.

Wesley

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15575 on: November 01, 2016, 06:56:37 PM »
In akula's katcher http://imgur.com/a/6Bevd the transistors Q2 and Q3 are doing this. The output of that goes to the katcher transistor.
In regards to Skype, I still did not see your contact request...

Good Day T-1000

Quick question:
Is this not redundant, (Akula Q2, Q3 transistors etc.) when using the Oleg/Ruslan/Sergie variable pulse width packet generator circuit that was discussed  a year or so ago?  It looks to me that the Oleg/Ruslan/Sergie or modified variation of it will offer superior control considering that the packet generation width and phase timing is totally adjustable.......

take care,peace
lost_bro



Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15576 on: November 01, 2016, 07:01:47 PM »

   What I've seen in most all the homemade push pull TL494 controller boards, is that the output at the bulbs is reduced and limited to about 120w, or so.  From the 24v, 5A, draw from a PS or batteries, such as what Geo is showing. 
   
   I don't know what my induction circuits is drawing, as the idea is to make it self run, regardless, even without limiting controllers.
   

Watch the very beginning where he shows a 1A reading. That is what his push-pull is drawing before the Kacher is switched-on. Does his Kacher pull the other 4A or is this shared by the push-pull?

C'mon Nick. By now you should know what your push-pull is drawing, as you have both a meter and a scope. If Geo can do it, so can you!

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15577 on: November 01, 2016, 07:02:47 PM »
Good Day T-1000

Quick question:
Is this not redundant, (Akula Q2, Q3 transistors etc.) when using the Oleg/Ruslan/Sergie variable pulse width packet generator circuit that was discussed  a year or so ago?  It looks to me that the Oleg/Ruslan/Sergie or modified variation of it will offer superior control considering that the packet generation width and phase timing is totally adjustable.......

take care,peace
lost_bro

Please resize your image.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15578 on: November 01, 2016, 07:12:10 PM »
   T:  Adrian's Kacher is showing no signs of having PWM controller and pulse timing. So, how is he doing it with just a transistor?
Or is he?   Is there any schematic or diagram of his set up showing his Kacher circuit posted yet?

   Does anyone have the photos of Adrian's system?  I saw some very clear pictures of his system posted here a while back and I'd be interested in downloading them, if possible.

Yes, NickZ, look that movie:

https://www.youtube.com/watch?v=_0GGu_j7WTw&feature=youtu.be

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15579 on: November 01, 2016, 07:29:09 PM »
Hi All,

Nick,
As the picture shows,... printboard left TL494 and TC4420 pushpull drivers and right the mentioned schematic Akula 0083 wich T-1000 also posted.

The scope shot is from the grenade output,..  btw it is all hooked up as the Akula0083 schematic, only my kacher primary is still connected to the 24Volts.
Also i rewind my primairy 2 x 12 turns on the yoke in a bifilar way,.......... this cleans the drain pulses in a very positive way,....  i don't have snubbers installed only draining it in a cap wich is being fed back in the main battery.


I have one problem,.....  I can't get the kacher interuptor puls on the left side of the sinewave top?
Somebody some suggestions?

Also no significant OU till now,....  unless tryed many things and all kinds of tuning.

I want to address because we are still discussing about the reason the "effect" is appearing.
As Hoppy several times pointed out it does mainly appear by the HF interference on the gates of the Push pull fets.
I have rebuild my push pull (shortned wire's etc.) and my gate signal is clean even with kachter continuesly running.
And as a result i ve not been able to get the Geo "Effect"again.

So small rap up about my progress.
If someone has a idea how to move the kacher spikes,...  your welcome.

Cheers

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15580 on: November 01, 2016, 07:38:48 PM »
''Hero Member
*****
Posts: 3187
View Profile  Personal Message (Offline)

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15519 on: October 30, 2016, 01:13:38 PM »
Quote
Quote from: AlienGrey on October 30, 2016, 01:10:20 PM
the grenade coil, if you wind to the left you get 'amps' to the right you get 'volts', but if your not on it's wave length you get 'naff all!. Also the 3 turn coil, isn't that feed back ?
I don't know.  I don't understand why winding direction would make that difference.''

I'll try to answer :Way we use coils wound in maner cw ccw?
If we have a coil like grenade coil, half cw and half ccw and a signal at resonance , we can see is 50 times more voltage on each part matched with the total coil.
This is from Mr. Utkin's documents PDF, it was post years ago .

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15581 on: November 01, 2016, 07:40:51 PM »
I think we have just drifted off a bit, I  think we have to spike the Katcher tesla coil with a pulse on and off at the exact time and phase look at the original akuls circuit the 74hc14 drives the |Katcher control circuit on the bottom right of Akula's original circuit that part of the electronics has full trigger and control of the switching .

A G

lacphong

  • Newbie
  • *
  • Posts: 21
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15582 on: November 01, 2016, 07:44:40 PM »

Hi magpwr,

Thank you for all the hints...  :)

Man you got me all confused now, I thought URFA-ibrahim is the way to go...  :-\

Anyway, if I'm not mistaken, the video where you took the screenshot from, Akula was showing how to find the resonance frequency of the coil, then using a spectrum analyzer to find the harmonics frequency of it, which is the 3rd harmonics.  Then he showed that when the frequencies are harmonic of each other, they will line up like seen on the scope.  Am I correct?  Now the question is; which harmonics should I use, and does it matter?  I see a lot of talking about 3rd, 60th and 63rd so far.

Here is what I'm planning to do:

1.  Find the resonance frequency of the grenade coil, let assume it's 55kHz.
2.  Then I have to set push-pull, and the 3 turns + .47uf cap to resonate at 3rd harmonics below 55kHz, which is 18.33kHz.
3.  The resonance frequency then would need to be at the 60th or 63rd harmonics of the 18.33kHz.

Am I missing anything here magpwr?

Thanks much in advance.
LP




hi lacphong,

I have already mentioned i am using only Akula circuit which is actually a not obvious parametric driver/oscillator which is using sub-harmonics of the resonances frequency.In a way L/C plays important role like adding more or less winding since it's harder to get exact capacitance value.

{
Just ignore URFA-ibrahim as well.I have achieve this feat before URFA even before i came know about parametric osillator.
In order achieve URFA effect(waste of time).
Let's say your L/c resonance is around 14.4khz from the 3 turns from the yoke.Your pwm generator would need to be running at twice the frequency at around 28.8khz.At this point you will hardly notice bulbs are lit at all.Then once you apply correct telsa frequency with the proper cut-off circuit.You are able to achieve his effect in no time.But like i said it's waste of time.
}

Many are made fools because of Akula older unstable design without using Earth.In that experiment base on obvervation and calculations Akula is actually using L/C resonance from the 3 turns.

But many fools did not know that the resonance frequency of the inner coil tesla/mini kapanadze like coil is actually "matematically few times"  higher than the resonance frequency of around 55khz from the 3 turns yoke. :D :D

That is Akula older device using lower frequency in order to get/drive higher frequency mathematically tuned at higher frequencies.
I have attached a old screenshot from Akula for your reference.

If you got a signal generator-sine wave then capture/frequency  a given frequency and then find out what is the right higher frequency for the smaller amplitude without altering the horz position in digital scope only.

I am very sure this earlier device is the one that made many look like fools eg:Ruslan along with many others likely thought that this was the way by using resonance all the way for this device. ;D

But do take note i am no longer here to teach but let others know that they are the fools in following Ruslan a prankster. :-X

--------------------------------------------------
Just ignore this delusional fool S9 whom i am very very sure got no electronics circuit designing.Just like the previous fool Atommix whom is able to generate composition in the megabyte. :D :D :D

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15583 on: November 01, 2016, 07:49:30 PM »
''Hero Member
*****
Posts: 3187
View Profile  Personal Message (Offline)

Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15519 on: October 30, 2016, 01:13:38 PM »
Quote
Quote from: AlienGrey on October 30, 2016, 01:10:20 PM
the grenade coil, if you wind to the left you get 'amps' to the right you get 'volts', but if your not on it's wave length you get 'naff all!. Also the 3 turn coil, isn't that feed back ?
I don't know.  I don't understand why winding direction would make that difference.''

I'll try to answer :Way we use coils wound in maner cw ccw?
If we have a coil like grenade coil, half cw and half ccw and a signal at resonance , we can see is 50 times more voltage on each part matched with the total coil.
This is from Mr. Utkin's documents PDF, it was post years ago .
It's Flemings Left-hand and right-hand rule depending on if it's a generator or a motor. and exciting the electrons.one way you get amps the other voltage. it's all basic stuff.

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15584 on: November 01, 2016, 08:23:34 PM »
for apecore,


TC4420 is non inverting driver, you don't have a ''signal --the driver start later'' in left part of sinusoidal signal
 Itsu have the same problem with ucc non-inverting, he makes a movie with that problem.
Maybe you must use an inverting driver TC4429