Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719094 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15450 on: October 27, 2016, 06:37:19 PM »
hi Sequental.9,

Why fear death if you know heaven is not easily accessible. :D

If you studied history long enough you will find that we humans do tend to make same mistakes over and over again.This is a hard fact in real life. :D

I do know parts of London will be flooded in the future as well as many other countries around the world.

Just accept it and move on for the better or the worst.Why bother pondering over and over.Just relax.
Climate change is irreversible as long as the human population keeps growing.

You are actually killing this topic although i don't really care.
  Imagin if you will our planet starting off as a huge water globe floating in space it is  like many of the other planets, it then becomes coated in a solid earth like crust, of course the planet is much smaller back then, but as the crust heats up it starts to heat the water inside our planet which ultimately ends up on the outside, hence where all the sea water has come from !

AG

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15451 on: October 27, 2016, 06:51:55 PM »
S9,

Why don't you start your own thread to present your ideas?  Not only is it very rude to take over an existing thread, it also causes a lot of confusion for those trying to follow the original intent of the thread.  If your ideas are worth anything then they should have a separate thread.  Of course if you think they are so worthless you feel this is the only way for them to get any attention then I guess trying to take over another thread or two is what you feel you have to do.

Hi Carroll.

Interesting!

How about we open a new thread? There's a lot of hijack talk..... but when you think about it there's little resemblance to the original Dally device to the devices being discussed presently.

Choose moderator/s..... take a vote?

Nice to see some old faces back again too.    :)

Just a thought.

Kind regards, Graham.

citfta

  • Hero Member
  • *****
  • Posts: 1050
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15452 on: October 27, 2016, 07:14:12 PM »
Hi Graham,

It doesn't really matter to me that much.  I am not a regular contributor to this thread anyway.  I just think it is pretty rude to jump into an existing thread and start putting a lot of stuff there that doesn't seem to fit with the topic of the thread.  If a topic has any value of its own then it should have a separate thread so as not to get confused with the original discussion.  But that is just my opinion.  Of course there are some threads that from the beginning are pretty open and that is fine also as long as that is what they were meant to be.

Take care,
Carroll

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15453 on: October 27, 2016, 07:57:16 PM »
Hi Graham,

It doesn't really matter to me that much.  I am not a regular contributor to this thread anyway.  I just think it is pretty rude to jump into an existing thread and start putting a lot of stuff there that doesn't seem to fit with the topic of the thread.  If a topic has any value of its own then it should have a separate thread so as not to get confused with the original discussion.  But that is just my opinion.  Of course there are some threads that from the beginning are pretty open and that is fine also as long as that is what they were meant to be.

Take care,
Carroll
I agree but how do we stop it or police it, and won't he do the same on that one ?
It does look a bit like he is using the site to either disrupt it or publish his art work.

regards A||G

citfta

  • Hero Member
  • *****
  • Posts: 1050
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15454 on: October 27, 2016, 08:17:08 PM »
Hi AG,

My suggestion in a previous post was that S9 should start his own thread.  Then he can post whatever he wants without polluting other threads and disrupting the discussions on those threads.  Of course he appears to have totally ignored that suggestion which indicates to me he doesn't think his ideas are worth a thread of their own.

Respectfully,
Carroll

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15455 on: October 27, 2016, 08:21:22 PM »
I agree but how do we stop it or police it, and won't he do the same on that one ?
It does look a bit like he is using the site to either disrupt it or publish his art work.

regards A||G

Dear  AlienGrey.

That's what a moderator does, a kind of policeman.

I have to agree with Carroll though, freedom of expression is very important and should not be stifled. Sequental.9 should start a new thread to expound his theories?

Kind regards, Graham.

dewetw

  • Newbie
  • *
  • Posts: 35
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15456 on: October 27, 2016, 09:14:10 PM »
PM
PM
PM
PM
PM

I sent an important message via PM to those on this thread that is willing to stick to the topic and contribute.

You've got mail! Please go read it ;)


lacphong

  • Newbie
  • *
  • Posts: 21
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15457 on: October 28, 2016, 04:15:00 AM »
Thank you for the info magpwr, I think I will buy the smaller one :)

Totally agree with you that, this project is more of a "prove of concept" educational purpose only.  It's very hard for anyone to get any commercial value from it...it's almost impossible to get a patent on any FE device, and it will extremely hard to convince people that the device even exist... :D

I'm planning to use a Class E Tesla coil, but looking forward to see your "one of a kind" Tesla coil design.  :)

Oh btw.  Are you setting up your device according to a diagram drew by Ibrahim?

Thanks,
LP




hi lacphong,

I took a quick measurement the inner diameter of my nanocrystalline toroid is around 10cm.Yes it is expensive item where efficiency is the "primary objective".

I may have forgotten to mention in the past the center tap using smaller toroid nanocrystalline(white plastic casing) is the one that lowers the presence of unwanted harmonics/ripples in output coil waveform besides the snubber.

--------------------
Related to tesla coil circuit i have just completed designing a one of a kind  "prototype ultra high efficiency simple tela coil driver circuit" which produce to around 6.5kVpp at mere 20volts at 2Amps for around 110turns(resonance frequency~1.85Mhz test coil).
This result into 59volts per turn.Take note interrupter is not implemented yet which will lower 2Amps to around 1Amps depending on interrupter duty settings.

I able to go higher voltage like 30volts all the way to 150volts but interrupter is highly recomended.

Since this project  got no real commercial value in itself hence i am able to release this prototype circuit design in my youtube channel:sanjev21 within 48hours. :D

I am somewhat disappointed by all the existing tesla coil driver design as found in the internet.Either it's bad but really simple design or considered too complex for some for using pll or etc.

So look out for it and be amazed.

That's all for now.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15458 on: October 28, 2016, 05:00:36 AM »
Thank you for the info magpwr, I think I will buy the smaller one :)

Totally agree with you that, this project is more of a "prove of concept" educational purpose only.  It's very hard for anyone to get any commercial value from it...it's almost impossible to get a patent on any FE device, and it will extremely hard to convince people that the device even exist... :D

I'm planning to use a Class E Tesla coil, but looking forward to see your "one of a kind" Tesla coil design.  :)

Oh btw.  Are you setting up your device according to a diagram drew by Ibrahim?

Thanks,
LP

hi lacphong,

I have already mentioned i am using only Akula circuit which is actually a not obvious parametric driver/oscillator which is using sub-harmonics of the resonances frequency.In a way L/C plays important role like adding more or less winding since it's harder to get exact capacitance value.

{
Just ignore URFA-ibrahim as well.I have achieve this feat before URFA even before i came know about parametric osillator.
In order achieve URFA effect(waste of time).
Let's say your L/c resonance is around 14.4khz from the 3 turns from the yoke.Your pwm generator would need to be running at twice the frequency at around 28.8khz.At this point you will hardly notice bulbs are lit at all.Then once you apply correct telsa frequency with the proper cut-off circuit.You are able to achieve his effect in no time.But like i said it's waste of time.
}

Many are made fools because of Akula older unstable design without using Earth.In that experiment base on obvervation and calculations Akula is actually using L/C resonance from the 3 turns.

But many fools did not know that the resonance frequency of the inner coil tesla/mini kapanadze like coil is actually "matematically few times"  higher than the resonance frequency of around 55khz from the 3 turns yoke. :D :D

That is Akula older device using lower frequency in order to get/drive higher frequency mathematically tuned at higher frequencies.
I have attached a old screenshot from Akula for your reference.

If you got a signal generator-sine wave then capture/frequency  a given frequency and then find out what is the right higher frequency for the smaller amplitude without altering the horz position in digital scope only.

I am very sure this earlier device is the one that made many look like fools eg:Ruslan along with many others likely thought that this was the way by using resonance all the way for this device. ;D

But do take note i am no longer here to teach but let others know that they are the fools in following Ruslan a prankster. :-X

--------------------------------------------------
Just ignore this delusional fool S9 whom i am very very sure got no electronics circuit designing.Just like the previous fool Atommix whom is able to generate composition in the megabyte. :D :D :D

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15459 on: October 28, 2016, 09:51:12 AM »
Mags,

Good to see you back posting but please refrain from calling people fools just because you feel more knowledgeable in the 'art' than most others.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15460 on: October 28, 2016, 11:55:34 AM »
Hi guys. To Verpies or anyone else who feels familiar with this.

I would like to produce a pulse train with controllable time intervals with the less ic's. In the attached image i use two 555. The left one resets the right one and produces the effect i want, but i am not sure if it is a valuable method. What is your opinion?

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15461 on: October 28, 2016, 12:16:51 PM »
I would like to produce a pulse train with controllable time intervals with the less ic's. In the attached image i use two 555. The left one resets the right one and produces the effect i want, but i am not sure if it is a valuable method. What is your opinion?
If by "controllable" you mean manual control, then you could use the dual TLC556 timer to decrease the package count (one half wired as an astable, that triggers the other half wired as a monostable).

But if I were you, I'd prefer an all-digital method (not relying on RC time constants) built around the 74HC40103 chips, because they are so cheap and can be wired without any programming down to 30ns resolution. 
The time intervals can be controlled with DIP switches + diodes or the 74HCT595 registers connected to an old computer (in lieu of the manual DIP switches).  The latter option is less expensive than switches ...surprisingly.

...and if programming is acceptable to you, then you could do everything in one 8-pin chip like the PIC 12F1612.  I am sure this  guy would help you with the program if you ask him.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15462 on: October 28, 2016, 12:31:16 PM »
nn

« Last Edit: October 28, 2016, 03:36:48 PM by AlienGrey »

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15463 on: October 28, 2016, 12:43:58 PM »
Both are possible.
A fixed crystal oscillator can be easily bought for couple of bucks ( e.g. here ) or substituted with a PLL if a synchronization with an external signal is needed.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15464 on: October 28, 2016, 12:55:29 PM »
If by "controllable" you mean manual control, then you could use the dual TLC556 timer to decrease the package count (one half wired as an astable, that triggers the other half wired as a monostable).

But if I were you, I'd prefer an all-digital method (not relying on RC time constants) built around the 74HC40103 chips, because they are so cheap and can be wired without any programming down to 30ns resolution. 
The time intervals can be controlled with DIP switches + diodes or the 74HCT595 registers connected to an old computer (in lieu of the manual DIP switches).  The latter option is less expensive than switches ...surprisingly.

...and if programming is acceptable to you, then you could do everything in one 8-pin chip like the PIC 12F1612.  I am sure this  guy would help you with the program if you ask him.

Thanks a lot Verpies. I will consider all the variables you mentioned before proceeding.

ps. (Even i think i already have some 556. I'll try to design it today and ask you again if something go wrong. )