Language: 
To browser these website, it's necessary to store cookies on your computer.
The cookies contain no personal information, they are required for program control.
  the storage of cookies while browsing this website, on Login and Register.

GDPR and DSGVO law

Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Google Search

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 10198932 times)

Offline Hoppy

  • Hero Member
  • *****
  • Posts: 4324
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15420 on: October 25, 2016, 07:59:00 PM »
can some one explain this , he is getting 220 volt from Stubblefield  like coil and 20amp from outer coil.
https://www.youtube.com/watch?v=-lpbyzTQZag
 
how can this help us in our research any ideas  ,which side to get 220 volt and 20 amp together

                                                             outer coil =20amp

                                                           Stubblefield coil= 220volt
                                                          -----------------------------------
                                                              metal
                                                         ---------------------------------
Hv ---------------> <----------------------====================-----------------------hv
                        sparkgap                  -----------------------------------
                                                               metal
                                                         ------------------------------------
                                                           Stubblefield coil= 220volt

                                                              outer coil   =20amp

The outer coil when loaded to pull 20A will show a very low voltage across the load. Its not 20A @ 220V.

Offline Acca

  • Hero Member
  • *****
  • Posts: 576
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15421 on: October 25, 2016, 08:30:02 PM »
Here are some photos of
 Adrian Guska Free Energy Device

Offline dewetw

  • Newbie
  • *
  • Posts: 35
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15422 on: October 25, 2016, 10:42:43 PM »
conico

Thanks for the feedback, I will have a look.


Bat1Robin2

Hey man, cool gnome  8)

I have to say you are a brave man placing the probe on the inside of the antenna at full working voltages. You are right, I was measuring the voltage applied to the tesla primary vs the voltage transmitted by the antenna. This is thus not a representation of power going into the tesla coil as such. It is however a representation of how power is “transported” through the system. When loading the output with the ground LEDs there was no decrease in the grenade LEDs output, nor did it seem to load the input from the function generator. But I will keep on doing some more experiments.

Offline URFA

  • Jr. Member
  • **
  • Posts: 70
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15423 on: October 25, 2016, 11:33:44 PM »
"You have to learn how the electromagnetic waves are acting in a high frequency transformer system. Then you have to bring the Kacher and the receiver coil in resonance  When you are ready then, Only then you can build the small circuit with the mosfet to hit the positive or the negative phase of the wave.(Like Pomah) Or vice versa. Hit the positive  phase of the wave to receiver(Grenade coil)  with kacher or tesla coil.(Like Ruslan or Akula) Thats it!!! You can see of yourself the overunity you wish."

 Regards.

https://www.youtube.com/watch?v=td0wvG6ZGfE


Ibrahim.


Offline AlienGrey

  • Hero Member
  • *****
  • Posts: 3665
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15424 on: October 26, 2016, 12:34:26 AM »
http://realstrannik.com/media/kunena/attachments/999/WO2016082013A1.pdf
http://realstrannik.com/media/kunena/attachments/702/document.pdf

This guys one patent with circuit diagram.

 The invention relates to an electron accelerator generator that comprises an electronic circuit
powered by the electricity mains by means of a socket (1), two bridge rectifiers, a transformer (4),
two electrolytic capacitors (7, 8), a bipolar transistor (9), a 110 V or 220 V Zener diode (10), a
11000 Ohm/10 W current limiting resistor for the Zener made of metal oxide or wire (11), a 600
Ohm/45 W wire resistor (12), a bank of six or more mega-capacitors connected in series of 20 to
1000 Farads/18 V each (13), an MOC 3012 photocoupler (14), two 4N25 photocouplers (15, 16),
an LM 555 integrated circuit (17), a TIC 226 TRIAC or equivalent (18), an IGBT module for 1000
V/200 A or greater (19), a 330 Ohm/1 W metal-oxide resistor (20), a 220 Ohm/1 W metal-oxide
resistor (21), a 3300 Ohm/1 W metal-oxide resistor (22), a 1000 Ohm/1 W metal-oxide resistor
(23), a 1000 Ohm/1 W metal-oxide resistor (24), a 100 Ohm/1 W metal-oxide resistor (25)
connected to the LM 555 integrated circuit (17), in which this circuit as a whole supplies any
external load, the power of which is greater than the input power of the generator. 

patent claim
input =120 volt @ 0.6 amp=72 watt
output=120 volt @ 40 amp= 5400 watt


Basically how fast you can discharge a capacitor  that is more power.
Ha Ha is this a joke, how much do you think the caps will cost ?? and do you know any one who has got one working ?
I suppose you could make a 12 or 24 volt version, it would still cost a packet though!

Offline AlienGrey

  • Hero Member
  • *****
  • Posts: 3665
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15425 on: October 26, 2016, 03:25:43 AM »
S9 please republish the link your talking about.

Offline NickZ

  • Hero Member
  • *****
  • Posts: 5150
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15426 on: October 26, 2016, 06:49:26 AM »
  GeoFusion:
  After reviewing your last videos, it looks like you might have lost the ability to light the bigger 300-500w bulbs, when you changed your bridge rectifier to the simpler two diode type.  Could that be so? 
  Watch that you don't touch the big white AC capacitor, with 250v on it, as it could knock you out.  I did that on my full bridge rectifier's capacitor (400v, 200uf), and it was no fun.
 
  Also, I believe that one of the reasons that you can't light the bulbs any brighter, than what looks to be about 25%, or so, on the bigger bulb, may be due to the diode that you placed on the PS.  The diode may be limiting the output from the PS to only 3-5A, instead of 15A that the PS can provide. So, I would recommend that you should try a bigger 15 amp diode, instead, or one that matches the output levels of your PS. IF you place only a 3 amp diode, on a 15A PS, and are drawing 4A from the push-pull by itself, and another 2-3amps from the Kacher circuit, for a total of about 6 to 7amps or so, that may be why the diodes are burning out. And the output lumin levels only drops with each additional bulb. Placing any additional bulb(s) which are only all sharing the SAME limited output from the PS, that can also drop the output voltage levels, as well.  Or not?
Ruslan is using higher capacity diodes on his PS now, also.
 
   I can wait for your feed back loop to be connected up, and you showing what it can do.
I'm still holding my breath, and I'm starting to turn blue. 
Just kidding.
  Nice new push-pull and Kacher driver circuits.
  Please say hello to your Serb friends, for me. And give them my thanks for helping you out on those new drivers circuits.

Offline Hoppy

  • Hero Member
  • *****
  • Posts: 4324
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15427 on: October 26, 2016, 10:19:34 AM »
  The diode may be limiting the output from the PS to only 3-5A, instead of 15A that the PS can provide. So, I would recommend that you should try a bigger 15 amp diode, instead, or one that matches the output levels of your PS.

Nick,

The diode will not limit current from the PSU. If the load demands 15A then a 3-5A diode will be overrated and burn-out.

Offline Hoppy

  • Hero Member
  • *****
  • Posts: 4324
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15428 on: October 26, 2016, 11:25:40 AM »
"You have to learn how the electromagnetic waves are acting in a high frequency transformer system. Then you have to bring the Kacher and the receiver coil in resonance  When you are ready then, Only then you can build the small circuit with the mosfet to hit the positive or the negative phase of the wave.(Like Pomah) Or vice versa. Hit the positive  phase of the wave to receiver(Grenade coil)  with kacher or tesla coil.(Like Ruslan or Akula) Thats it!!! You can see of yourself the overunity you wish."

 Regards.

https://www.youtube.com/watch?v=td0wvG6ZGfE


Ibrahim.


What is the current drawn by your lamp load and the average voltage across your lamp load?

Offline Jeg

  • Hero Member
  • *****
  • Posts: 1539
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15429 on: October 26, 2016, 11:40:19 AM »



Talking about replications I was tipped on something in Ruslan videos which relates to the grenade coil output in https://www.youtube.com/watch?v=ZZrB3pCRu8s#t=502
 Ruslan was charging output caps (around 1uF) with up to 1000V from grenade then taking out power with impulse step-down inverter (~15kHz) to the load over ferrite ring, diode bridge and output caps.In short, the inverter just like in Don Smith circuit. :)
I think this is next step for ongoing experiments when you have instant charging caps on the grenade output...

Hi T1000
Thanks for bringing this again. Do you know anything more of his inverter? I have seen a drawing which presents a pulse train with intervals of lower frequency. His transformer is of 300T 0.75mm wire, and 50T secondary. I suspect that he tunes his secondary to the low frequency intervals as I have done this before while experimenting with D.Smith.   

Offline Jeg

  • Hero Member
  • *****
  • Posts: 1539
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15430 on: October 26, 2016, 11:45:02 AM »
Found it

Offline Utopia Now

  • Full Member
  • ***
  • Posts: 100
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15431 on: October 26, 2016, 12:30:48 PM »
Hallo Ibrahim,
Quote
"You have to learn how the electromagnetic waves are acting in a high frequency transformer system.
 Then you have to bring the Kacher and the receiver coil in resonance
  When you are ready then, Only then you can build the small circuit with the mosfet to hit the positive or the negative phase of the wave.(Like Pomah) Or vice versa.
Hit the positive  phase of the wave to receiver(Grenade coil)  with kacher or tesla coil.(Like Ruslan or Akula) Thats it!!! You can see of yourself the overunity you wish."
https://www.youtube.com/watch?v=td0wvG6ZGfE

 Regards.  Ibrahim.

It looks Wonderful, 
Do you have the schematic  to the setup in the video  .. it is  good to have  "a" result  because from there on you can optimize  things ( results ) i guess.
Do you have scoop screen shots

You say : " You have to learn how the electromagnetic waves are acting in a high frequency transformer system."   What do you think should we specificaly look for  or  notice or take  care of   ... ?

Any way  Thanks Ibrahim    ... Amazing  :)

Utopia  Now

Offline AlienGrey

  • Hero Member
  • *****
  • Posts: 3665
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15432 on: October 26, 2016, 01:13:21 PM »
Adrian's tuning of his tesla coil, notice the former has as far as I can see 14 Turns of wire, each one with a tap nodule for simple tuning.

AG

Offline justawatt

  • Sr. Member
  • ****
  • Posts: 290
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15433 on: October 26, 2016, 02:30:36 PM »
Ha Ha is this a joke, how much do you think the caps will cost ?? and do you know any one who has got one working ?
I suppose you could make a 12 or 24 volt version, it would still cost a packet though!

https://www.youtube.com/watch?v=7F-F8tnUSsM

proof of concept he is using 40 watt solar panel to MPPT controller super capacitor as battery side of MPPT and output of MPPT to load battery with 1500 watt inverter and load of inverter to 1 kw rice cooker.

If this is normally done of that same battery with inverter alone will drain the battery in first 8 min completely.

so may be replacing with solar panel with output from who ever replicating ruslan device ,this circuit might help them to self loop it
 

Offline AlienGrey

  • Hero Member
  • *****
  • Posts: 3665
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15434 on: October 26, 2016, 03:24:20 PM »
It's a bit misleading, solar panel then up converter circuit to charge control as panel can reach 25volts  then super capacitors in series as 2.7v ones will blow up if not, then low power MOSFET charge controller. then it might work if you have some sun ;).

A G