Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719023 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15030 on: September 23, 2016, 06:00:51 PM »
Open with pdf browser - so simple !!  :D

......
All: Does anybody have good experience and know to work with some Electronic CAD packages like Altium, PCAD. OrCad, AutoCAD, Target3001, Spectra, Topor and can make professional engineer schematics and design PCB layout/s on two sides (upper side must be ground plane) for all of these schematics ?

It will be real help to all BTG builders - all around the world !!

Hi Enjoykin I don't recognise any PCB cads i n your list I use old version of Aries proteus if that's any help sorry about PDF I missed the links or they were blocked, ok now
but thanks for diagrams, sometimes it's best to make a perferated under board hard-wired links under-card to iron out bugs first before going for full proto PCB. from my observation.

A G

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15031 on: September 23, 2016, 07:12:39 PM »
   apecore:
   For one thing there is not one person that has actually made a true and accurate replication, exactly as seen in Ruslan's videos, or schematics,  so it's hard to judge all the different versions and various replication as to why they are not self running.
   
   I think that Geo may be close, and possibly so am I, but more and more tuning IS needed. As this is an extremely complicated device, and is not for the faint of heart.

   I am at the point that T-1000 suggested a long time ago, to allow for the self running effect, by connecting up a feed back loop.
First see if the system will run itself with NO load on it. Then progressively adding more and more load to the already self running circuits. That is what I'm up to.

  Conico:  Well... Thanks for that posting a picture of your device replication. A picture, is worth a thousand words.
  Welcome to this thread and to our ongoing tests and discussions, where some of us are focused on our versions of this particular TopRuslan 7 type of replication.

lacphong

  • Newbie
  • *
  • Posts: 21
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15032 on: September 23, 2016, 08:46:15 PM »

Thank you Enjoykin2017 for all the translation.


Open with pdf browser - so simple !!  :D

......
All: Does anybody have good experience and know to work with some Electronic CAD packages like Altium, PCAD. OrCad, AutoCAD, Target3001, Spectra, Topor and can make professional engineer schematics and design PCB layout/s on two sides (upper side must be ground plane) for all of these schematics ?

It will be real help to all BTG builders - all around the world !!


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15033 on: September 23, 2016, 10:07:14 PM »

conico,

nice setup.


Quote
IRFP260 burn because it can not resist at 512v Vpp

i am puzzeled by that, do you mean there is 512Vpp on the drains of these MOSFETs?
If you are using a 24V supply, there should be ideally 48V max there, with some spikes perhaps 100V.
So what does this 512Vpp looks like?  (scopeshot)
Do you use snubbering to fight these spikes? (if any)

Perhaps you should look into this lossless clamp design from verpies.

572Vpp looks a normal resonance voltage on the inductor/wima caps via the 3t secondary of the yoke with 24V input.


Itsu

Enjoykin2017

  • Jr. Member
  • **
  • Posts: 68
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15034 on: September 23, 2016, 10:08:13 PM »
Here is something to think about - what pulsed high tensity electric field does to already present magnetic field? The proof is all over places, including GeoFusion sync effect replication you guys already experienced... :)
And to create that EM pulse on the Tesla coil/nanopulser it does not take much power but the result may be much greater when combined with ions from the air.

Cheers!

I need «Relata Refero» for some people here !!

I have explicitly said «intrinsic electrical displacement or intrinsic charge displacement»
Intrinsic means inside electron shell !!

I said that because my dear Mr.Yuriy V.Leonov thought that «electric field displacement inside electron shell could produce magnetic field».

So in two words dear Yuriy V.Leonov think that source of Magnetic Field is Electric field which is totaly wrong and he was deluded by fact that around conductor exist Magnetic Field while through conductor running Electron Conduction Current.!!

Another question about known Laboratory fact is: «Why none magnetic field exist around conductor , near aboslute zero temperature , (several Kelvins higher) , while flowing Electron Conduction current of 1 x 106 A and higher ??»

How to understand that fact and how to explain what is going on in that case ??

Yes i have already explained in my earlier posts for those who are able to think without mind blockade.
..........................

Now we know from Tesla´s notes that he had used 12 Million volts as accelerating DC voltage for his massive copper primary. Right ?? Yes.

Then take a clean paper and pensil and calculate yourself electrons speed of bunch of electrons (unipolar impulse) with initial velocity voltage U=12 million volts.

Ve = 5,95 x 105 √ U (m/sec).

It is far higher than speed of photons or precise speed of electrical matter (electron filling) in free space.

Then find my earlier post where i have explicitly shown and calculated inertial forces and calculate forces with given Ve.

So will be fully clear that both electron filling matter (Electrical matter plus Magnetic dipole matter) will be released out of electron shell with giant inertia forces and will continue to fly with superluminal velocities.

Now RADIANT matter could be particular «intrinsic matter» of magnetic-dipole matter or maybe new monopolar aggregate state of uncoupled magnetic-dipole matter.

I have study Russian translation of very interesting book «Оккультная химия - Ч. Ледбитер» - an investigation by CLEAIRVOYANT MAGNIFICATION into the ATOM structure and some intrinsic Atom compaunds. Real researcher in Free Energy area should be read and make deep analyse of data from this book.

Reg.
Enjoykin

Enjoykin2017

  • Jr. Member
  • **
  • Posts: 68
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15035 on: September 23, 2016, 10:19:03 PM »
How is ferrite ring transformer wound in * Преобразователь для питания ТТ или качера.pdf = Power converter or Switch power supply for TT or Katcher. ? What is the output power ?[/size]

Try this way !!  :)

Enjoykin2017

  • Jr. Member
  • **
  • Posts: 68
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15036 on: September 23, 2016, 10:29:23 PM »
   What I'm seeing is that even with what we are calling the "amplification effect", the bulbs are not lit to anywhere close to the lumin levels of normal grid powered bulbs.  This goes for ALL self runners. Including the Akula and Ruslan devices, and any other replication efforts. OU is not a prerequisite for self running!!! 
  Stop looking for OU,  as OU does not exists, and never did, never has, and never will. 
  So, what I get from studying about all this is, is simply to keep experimenting, until the moment of truth. 
  Forget about input to output measurements, and focus on the self running effect, instead.

My dear South-American Serb Nik Zec - if OU does not exist why thaт a lot of very inteligent people who made successful OU devices were brutally killed by governements special services all around the world ??

by chance ??  :o

I don´t think so !!

Second , what about known facts from famous Thomson´s Philadelphia experiment from 1872 year , or Joseph Henry experiment from 1842 years ?

Do you still thinking - OU effect does not exist and OU devices are technical mirage ?

.........................................
From the Gerry Vassilatos book "LOST SCIENCE"

This energy had been accidentally generated in 1872 by Thomson and Houston. Not waves, but rays. Electrical rays. A forgotten phenomenon. Unidirectional electric impulses of great power radiated electric rays, not waves. These rays penetrated all kinds of matter, whether stone and steel alike. The resultant sparks could be drawn from every insulated metal object in the
large building in which the experiment was being performed. Not radiowaves, but electric rays.

Later in that century, Nikola Tesla accidentally observed the same electric ray production. He studied the phenomenon exclusively, developing impulse generators and electric ray projectors. When Tesla speaking of electric rays which evidenced a light-like nature he referred to this phenomenon. Not radiowaves, but electric rays. New light. Dr. Rife had rediscovered this phenomenon. Tesla spoke of his own "millimeter rays", mentioning their "bacteriocidal" value. This same phenomenon had vindicated Tesla's words. Therapeutic properties were demonstrated when precisely controlled
.

From the Peter A. Lindemann, book The Free Energy Secrets of Cold Electricity,"

Tesla was truly mystified by this strange new phenomenon, and searched the literature for references to its characteristics. No such reference was found, except in the surreptitious observations of two experimenters. In one case, Joseph Henry observed the magnetization of steel needles by a heavy spark discharge. The extraordinary feature of this observation (1842) lay in the fact that the Leyden jar, whose spark apparently produced the magnetizations, stood on the upper floor of an otherwise electrically impervious building. Brick walls, thick oak doors, heavy stone and iron flooring, tin ceilings. Moreover, the steel needles were housed in a vault in the cellar.

How did the spark affect such a change through such a natural barrier?

Dr. Henry believed that the spark had released special "light-like rays", and these were the penetrating agencies responsible for the magnetizations. metal tabletop. Again reactivating the coil
produced a shrieking silver-white spark, entirely visible to any whom sat in the last row. Wishing to show this to a colleague, Edwin Houston, Thomson made for the door and was abruptly stopped. Touching the brass knob on the otherwise insulated oak door, Thomson received an unexpected sizzling shock. Turning off the Ruhmkorrf Coil, Thomson found it possible to stop the effect. Calling for Edwin, he summarized what had occurred. Then turning the unit back on again, the stinging charge effects returned. The two gentlemen ran  throughout the huge stone, oak, and iron building with insulated metal objects now. Each touch of a penknife or screwdriver to anything metallic, however distant from the coil or insulted from the floor, produced long and continuous white sparks. The account was written up as a short article in Scientific American later in the same year.

In studying each of these two prior observations, events each separated by some thirty years, Tesla perceived an essential unity with that of his own discovery. Each observation was perhaps a slight variant of the very same phenomenon.  Somehow accidentally, each experimenter had managed to produce the explosive supercharging effect. In the case of Dr. Henry, the explosive bursts occurred in a single flash, electrostatic machines being used to accumulate the initial charge. The second case was peculiar, since it evidenced the sustained and continuous production of super-charging effects. The effect was rare because it obviously required very stringent electrical parameters. Tesla deduced this from the simple fact that the effect was so infrequently observed by experimenters the world over. In addition, he was quick to remark concerning the anomalous attributes attached to the phenomenon. Tesla knew that, despite the extremely penetrating effects in each case, he had secured the only means for achieving the "complete" and maximum manifestation of supercharging. His was an apparatus with no equal, capable of releasing an aspect of the electrostatic field which others very apparently had not.

Though discovered by Tesla in 1889, the preliminary observation of this effect was published after an intensive battery of investigations. "The Dissipation of Electricity", published just prior to Christmas of 1892, is the pivotal Tesla lecture. This is the departure point in which Tesla abandons research and development of high frequency alternating current.
.

What kind of Natural matter can magnetize and electrify heavy isolated matalic objects at very long distances ?
...........................

Why nobody can find Tesla´s famous lecture "The Dissipation of Electricity" , from 1892 year.? Why this Tesla´s lecture is so dangerous to humankind and why is so special.?

Nik Zec удачного дня !!  :)

Enjoykin

 

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15037 on: September 23, 2016, 11:22:11 PM »
   Here's a new video that I just posted, showing the device lighting 4 100w bulbs, this time, including the amplification effect of the Kacher circuit, which is running off of the 28t yoke coil.
   The new full bridge rectifier is in place, which does not heat up like my previous one did. And it does provide for higher output from the 28t coil, through the full bridge rectifier/capacitor, to the Kacher's input.

   Conico:  There is no such thing a OU, and there never will be.
However, there can be an additional input source to an open circuit device,  which can allow it to self run. Yet, there is only as much output as what is coming into a system, from this additional source, some call Aether.
But, no OU, as we think of it.
  That is the theory that I'm here to prove. One way or the other.

   The video got cut off at the end, when the camera moved to within a foot of the grenade. This has not happened to me before.
But, now I know that this will happen, if I get too close.

    TopRuslan replication showing lighting 4 100 w bulbs. - YouTube
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15038 on: September 24, 2016, 04:15:20 AM »
   Here's a new video that I just posted, showing the device lighting 4 100w bulbs, this time, including the amplification effect of the Kacher circuit, which is running off of the 28t yoke coil.
   The new full bridge rectifier is in place, which does not heat up like my previous one did. And it does provide for higher output from the 28t coil, through the full bridge rectifier/capacitor, to the Kacher's input.

   Conico:  There is no such thing a OU, and there never will be.
However, there can be an additional input source to an open circuit device,  which can allow it to self run. Yet, there is only as much output as what is coming into a system, from this additional source, some call Aether.
But, no OU, as we think of it.
  That is the theory that I'm here to prove. One way or the other.

   The video got cut off at the end, when the camera moved to within a foot of the grenade. This has not happened to me before.
But, now I know that this will happen, if I get too close.

    TopRuslan replication showing lighting 4 100 w bulbs. - YouTube
 
make yourself a radiant energy detector use a piece of alloy tube for a handle and 4 fast geranium diodes in a bridge circuit but put a red led as load and use a piece of steel as the aerial detector if memory serves me right see if led lights up when it's by tesla coil use plastic for a box !
 

conico

  • Sr. Member
  • ****
  • Posts: 292
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15039 on: September 24, 2016, 04:44:07 AM »
conico,

nice setup.


i am puzzeled by that, do you mean there is 512Vpp on the drains of these MOSFETs?
If you are using a 24V supply, there should be ideally 48V max there, with some spikes perhaps 100V.
So what does this 512Vpp looks like?  (scopeshot)
Do you use snubbering to fight these spikes? (if any)

Perhaps you should look into this lossless clamp design from verpies.

572Vpp looks a normal resonance voltage on the inductor/wima caps via the 3t secondary of the yoke with 24V input.


Itsu

 I use snubber 2.2nf, 10 Ohm resistor and UF4007 but there are spikes on drain of mosfets more then 380 Vpp, that destroy IRFP260.
Yes, 512 Vpp is on the series caps with the 3 turns and inductor, is what you see on the picture, but on the drain of mosfets is almost the same as spikes.
I tried Verpie's lossless clamp but the problem come from the grenade coil which, maybe influence the Yoke, the same spikes were.
I do believe that Yoke is a 90 degrees coil from grenade coil, very important in Ruslan's device, look the last Akula's device, on the bottom is a toroid at 90 degrees, look Geofusion' movie, he show that yoke must be in a proper place if not the effect disappear, look Kapanadze device the same grenade coil as Ruslan and a 'flower coil' in back of it, at 90 deg.
In one of the Itsu's movie  when he start the Kacher has just 2v more on the load, if the yoke were in the proper place he wold has the effect.
One more think, my inductor coil was very hot 44 deg celsius after one our of work. The wire of my inductor coil is 2.5 mm and has 78 miliH, on Ruslan schemes is 43 mH, I believe Ruslan use 4mm wire for inductor.
How do i stop thous drain spikes?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15040 on: September 24, 2016, 07:56:08 AM »
How do i stop thous drain spikes?
Hi Conico
Snubber calculation is necessary. Use this calculator. Have fun! ;)

https://www.maximintegrated.com/en/app-notes/index.mvp/id/3835

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15041 on: September 24, 2016, 11:22:31 AM »

Conico,

Ruslan also uses IRFP260 (200V) or even IRF3710 (100V) MOSFETs, so IMO these 380V spikes should not be there for a good working device.

The Oleg designed snubbering did not work for me (or Jeg), so a properly designed/calculated snubber circuit as linked by Jeg did the trick,
but it had some side effect like unwanted RC times during opening/closing of the MOSFETs.

The lossless clamp design from verpies should be able to handle these spikes but even then a proper physical layout is mandatory.

I see a lot of long wires between your yoke and MOSFETs, also no MOSFET driver chips are seen on the MOSFET board, so probably they are in the grey box
meaning long wires = extra inductance.

What you are saying about yoke and grenade needing a 90° angle for "the effect" to occur sounds somewhat vague, it more sounds to me there is (unwanted?)
oscillation going on when components are placed in a certain position.

My inductor also ran hot after some minutes, but that seems normal as there is 50A running around in that series LC.

Itsu

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15042 on: September 24, 2016, 03:21:07 PM »
Conico,

Ruslan also uses IRFP260 (200V) or even IRF3710 (100V) MOSFETs, so IMO these 380V spikes should not be there for a good working device.

The Oleg designed snubbering did not work for me (or Jeg), so a properly designed/calculated snubber circuit as linked by Jeg did the trick,
but it had some side effect like unwanted RC times during opening/closing of the MOSFETs.

The lossless clamp design from verpies should be able to handle these spikes but even then a proper physical layout is mandatory.

I see a lot of long wires between your yoke and MOSFETs, also no MOSFET driver chips are seen on the MOSFET board, so probably they are in the grey box
meaning long wires = extra inductance.

What you are saying about yoke and grenade needing a 90° angle for "the effect" to occur sounds somewhat vague, it more sounds to me there is (unwanted?)
oscillation going on when components are placed in a certain position.

My inductor also ran hot after some minutes, but that seems normal as there is 50A running around in that series LC.

Itsu
Hmm! all this reminds me of Eric Dollard lectures, and DC and motors, Ever wonder why electric motors run so hot ? it's because the energy fly back (radiant energy if you like ) is wasted in heat, can't you drain your spikes of back into the system, ans does the plastic pipe get hot and 'warp' ?

AG

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15043 on: September 24, 2016, 04:12:53 PM »
Hmm! all this reminds me of Eric Dollard lectures, and DC and motors, Ever wonder why electric motors run so hot ? it's because the energy fly back (radiant energy if you like ) is wasted in heat, can't you drain your spikes of back into the system, ans does the plastic pipe get hot and 'warp' ?

AG

Nelsonrochaa knows how to do that :D
But he 's bin here long time agoo.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #15044 on: September 24, 2016, 04:47:20 PM »
   Itsu:
   Good to see you back. I think that it's safe to say that we all missed you here.
   
   Have you given any thought to restarting your tests and trials on your set up?
   I feel as you may have been very close to having a good working system, but possibly a simple wiring re-connection method may be all that is needed. As there are several ways to go about that on these devices.
   
    I don't see any spikes on my device. Just a normal sine wave, interposed by the HV, top of the same normal sine wave signal.
    My inductor does not run hot, but the yoke does heat up after a few minutes running. But, not so hot as to melt the wires.

   Main thing that I'm seeing now is, that when I have a load of 3 100w bulbs running off of the 3 turns coil's 0.47uf cap, and I add another 100w to the same output, there is no change in the first three bulbs. Similar to what Geo had shown.
So, that is where I'm working to take some of the output to use for a feed back loop. Connecting a laptop charger to that same 3 turns coil, did produce a use able input for the Kacher circuit.  But, I'm still working on all of this.

   Any way, it good to see you posting once again.
                                                                           NickZ