Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719713 times)

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14160 on: May 13, 2016, 07:33:26 PM »
This is the old device already, there is a new layout of the PCB has anyone got a copy of the underside view and component layout schematic the one i found is not very viewable and out of focus,,, if someone can find a good copy I can relay it out and shove it back out one here if any ones interested.

AG
Hi.
This is a strange transformer called a Tesla regulator
Your PCB looks like this ?


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14161 on: May 14, 2016, 12:20:49 AM »
no like this ! but if you use it, it'sat your own risk, i have not built it yet ! but be my guest it's better than nothing but check it as you go along.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14162 on: May 14, 2016, 11:00:06 AM »

I have changed the nano-pulser to be fed by the yoke (mediator) instead of the 24V battery stack.
So only thing fed by the 24V battery stack is the push-pull driver driving the yoke (mediator).

This yoke has the 3 turn secondary for the series LC circuit and the modified 28 turn secondary (only 14 turns left) to drive (after rectification to 24V dc) the nano-pulser.


The parallel LC circuit is removed for the time being, so we have the Grenade (layers 1,2 CW, layers 3,4 and 5,6 CCW) 38m length, on the exposed 1,2 layers we have the
shorted coax wound, 6m length, and on top of that we have the inductor in 3 layers bifilar wound with 19m length.

The coax cable layer between the grenade and inductor has severely hampered the transfer between them as we only have about 76Vpp on the grenade output which
after rectification yields about 46VDC going to the single 100W (220V) bulb which dimly glows at resonance.

Activating the nano-pulser only further dims this 46VDC somewhat for now.

Only ground attached is to the 6th layer return wire of the grenade.

Video here:   https://www.youtube.com/watch?v=yDZZUSZkG4Y&feature=youtu.be

Further testing to be done, still thinking of adding the parallel LC circuit underneath the grenade, and/or adding a copper/alu sheet around the grenade.

Itsu

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14163 on: May 14, 2016, 11:31:04 AM »
Itsu,
Just seen your video and there are two things which need to be solved. The output of grenade have to be sinus wave and that happen after resonant series lc on inductor. That go directly to load after, no secondary yoke connection in series. The second thing on 6:03 of video scope shot is, the oscillation on high frequency on the sides of square wave. It is the frequency for nanosecond pulser to form it's peaks.

Hope it helps.

Cheers!

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14164 on: May 14, 2016, 01:06:03 PM »
Maybe it's time to have another look at the aquarium 2
https://www.youtube.com/watch?v=0JXFWuwlg-0


This, fater all, what we are trying to imitate.





Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14165 on: May 14, 2016, 01:23:21 PM »
Maybe it's time to have another look at the aquarium 2
https://www.youtube.com/watch?v=0JXFWuwlg-0


This, fater all, what we are trying to imitate.

An umteenth look at this device, is not going to progress us, as apart from a very sketchy patent doc, there is nothing else to go on.

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14166 on: May 14, 2016, 01:26:58 PM »
An umteenth look at this device, is not going to progress us, as apart from a very sketchy patent doc, there is nothing else to go on.


I disagree.  As you do your experiments you get a deeper understanding of what is going on. eventually we will be able to see the secret, I am sure.


https://www.youtube.com/watch?v=0JXFWuwlg-0

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14167 on: May 14, 2016, 02:44:40 PM »

As you do your experiments you get a deeper understanding of what is going on. eventually we will be able to see the secret, I am sure.


https://www.youtube.com/watch?v=0JXFWuwlg-0

Maybe but not a deeper understanding derived that particular video.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14168 on: May 14, 2016, 07:42:45 PM »
it looks to me like a large fan cooled heat sink he has drilled and tapped to mount his Tosh transistors on. ;)

the other one looks like a 2.5" dia or larger white ferrite torrid of high permeability I think RS components sell them world wide !

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14169 on: May 14, 2016, 08:12:13 PM »
it looks to me like a large fan cooled heat sink he has drilled and tapped to mount his Tosh transistors on. ;)

the other one looks like a 2.5" dia or larger white ferrite torrid of high permeability I think RS components sell them world wide !
but you have a sharp temper It does not look like what I see :P and how can not agree with you ?
 
"interesting information system done but it is not checked" oh I was relieved.
- so I tell you that I tried to do something on this mock-up prototype and not really have something to be proud.
 
 Meanwhile try to upgrade my old driver slow proces zzz....
Thanks for the design project.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14170 on: May 14, 2016, 09:31:21 PM »
Itsu,
Just seen your video and there are two things which need to be solved. The output of grenade have to be sinus wave and that happen after resonant series lc on inductor. That go directly to load after, no secondary yoke connection in series. The second thing on 6:03 of video scope shot is, the oscillation on high frequency on the sides of square wave. It is the frequency for nanosecond pulser to form it's peaks.

Hope it helps.

Cheers!

T-1000,

i can get a sine wave like signal on the grenade output when i add a parallel capacitor (0.15uF) across the grenade.
It slightly increases the overall grenade output, but also pulls the Series LC resonance lower in frequency.

The grenade has NO secondary yoke connection in series (the 28 turns is used now (14 turns left) to power the nano-pulser).

The oscillation on high frequency on the sides of square wave (1.14MHz) is there with or without the nano-pulser being active.
There is no way to get the nano-pulser frequency up to that frequency (1.14MHz).

Itsu

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14171 on: May 14, 2016, 11:11:29 PM »
T-1000,

i can get a sine wave like signal on the grenade output when i add a parallel capacitor (0.15uF) across the grenade.
It slightly increases the overall grenade output, but also pulls the Series LC resonance lower in frequency.

The grenade has NO secondary yoke connection in series (the 28 turns is used now (14 turns left) to power the nano-pulser).

The oscillation on high frequency on the sides of square wave (1.14MHz) is there with or without the nano-pulser being active.
There is no way to get the nano-pulser frequency up to that frequency (1.14MHz).

Itsu
The series resonance will output sine wave out of grenade. No caps on the output still.
And nanopulser does not need to fire on each sine wave beginning. The pulse width needs to be half of that sine wave.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14172 on: May 15, 2016, 12:43:40 PM »
The oscillation on high frequency on the sides of square wave (1.14MHz) is there with or without the nano-pulser being active.

There is no way to get the nano-pulser frequency up to that frequency (1.14MHz).

Hi Itsu
I have the same oscillations on the sides. I didn't look at it in more depth, but i think the cause is the remaining hf oscillations back to the drains again. The are eliminated enough through the lossless clamp arrangement, but still exist even attenuated.   

About nanopulser.
I searched a little to find a Dally's statement that i had read in the past but i didn't find it. He was saying that he discovered the effect when he was adjusting his nanopulser's width. Indeed, any given width gives rise to a specific frequency. If this frequency happens to be your resonant frequency then i guess that it's a matter of what connections you do have for the effect to appear.

T1000
How is the progress? Let me ask you something. Wouldn't be more logic if someone tunes his grenade at the high frequency instead of KHz as this appears to be in the most circuits?

In addition what means in Russian: niz resanans - verh resanans?
 

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14173 on: May 15, 2016, 02:29:16 PM »

T1000
How is the progress? Let me ask you something. Wouldn't be more logic if someone tunes his grenade at the high frequency instead of KHz as this appears to be in the most circuits?

In addition what means in Russian: niz resanans - verh resanans?
More I dig in, more I find out what actually is needed. Some other hints from akula:
1) The grenade windings which you make opposite have to have exactly same wire length as first 2 layers. This is very important for making standing waves.
2) The ground is source for electrons and the surrounding air+wire insulation is the source for positrons. This is achieved by making pull of positrons from air which are absorbed on wire of grenade coil with the help of magnetic field. The Tesla coil/nanosecond pulser have to attract them but do not absorb by itself. This is why there is Tesla switch style pulse breaking applied.
3) The output of grenade is not from induction, it is from standing wave which contain positrons on one wire and electrons on another.
So here are things to think about how to achieve such conditions...


Good luck everyone!


P.S> In regards to your question it becomes irrelevant with such information. And "niz resanans - verh resanans" actually have meaning of "low frequency resonance - high frequency resonance"

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14174 on: May 15, 2016, 02:56:27 PM »
Hi.
I've got a problem and I do not know where is the point of reference of green amplituby called (stroboscope)?
on a two-channel oscilloscope can not see all this as deal with it?
- could someone point me to a place in the scheme ,and suggest how to have this frequency has set for Tesla?

https://youtu.be/9hk-4BojB_E