Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718800 times)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14100 on: May 07, 2016, 09:40:24 PM »

I thought i take a shortcut and instead of unwinding my grenade to install a "single turn tesla secondary like coil" as first on the former, i left the grenade
(layers 1,2 CW, layers 3,4 and 5,6 CCW) as it was and put the "single turn tesla secondary like coil" over the exposed part of the layers 1,2, see picture 1

Then i put the shorted coax cable around this, see picture 2 and finishing it of with a 3 layers bifilar inductor coil, see picture 3.

I tuned the single turn tesla secondary like coil with some capacitors as high as it would go which was 12.5KHz (1nF cap; going lower in value does not increase the frequency anymore).

It tuned the inductor to this same 12.5KHz with a 0.47uF capacitor in series.

But the results are not very promising, very low output on the grenade (load a 40W bulb) around 49V dc.

Activating the nano-pulser shows again a minimum pulse ontop of the grenade voltage/current and even lowers the output voltage to about 40V dc,
see screenshot where i measure the AC voltage (yellow) on the grenade before the FWBR and the current (200mA/div).

Moving the nano-pulse across the voltage/current range (±90°) gives only 2 spots where the bulb fluctuates which is on top of the voltage and at the zero crossing of the voltage.


Well,  guess i have to go all the way and unwind the grenade.


Itsu

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14101 on: May 07, 2016, 09:40:24 PM »
Tomtech 29 yes I have a layout for the original device that was published some time back but this one you have put up is a newer version How is it possible to send you the lay out ?

I have not tried running the device on a unit but all the signals are available on the unit, ;) but have I got to start again on version 3 ?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14102 on: May 07, 2016, 10:22:02 PM »
Nice job Tomtech, thanks for sharing.

Itsu, it seems like your nanopulser can not give rise to the right frequency. I think that varying pulse's width is important.

Guys I 'd like to amplify my fg's output voltage for frequencies 5-9Mhz. Is that possible with simple means? Its default output is 20V pk-pk. Can I take it up to 100V? I don't care about current. Few mA are enough. Do you find it a good idea to drive a 5200 transistor? Instead of a coil at its collector i will use a resistance.

 

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14103 on: May 08, 2016, 08:54:41 AM »

Guys I 'd like to amplify my fg's output voltage for frequencies 5-9Mhz. Is that possible with simple means? Its default output is 20V pk-pk. Can I take it up to 100V? I don't care about current. Few mA are enough. Do you find it a good idea to drive a 5200 transistor? Instead of a coil at its collector i will use a resistance.
You want run kacher on 5-9 megaherc? If yes, then you can do it. Only need higher voltage  for primary coil, about 50-100 volts, if you want get not week power on output.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14104 on: May 08, 2016, 12:55:28 PM »
You want run kacher on 5-9 megaherc? If yes, then you can do it. Only need higher voltage  for primary coil, about 50-100 volts, if you want get not week power on output.

Wow Menof! I couldn't imagine that i can go so high with a Katcher! I will definately try it as i find some very nice peaks at those frequencies when tuning. Thanks man

In the meanwhile i designed a simple common emitter voltage amplifier using SC5200. I will supply it with 150Vdc. My intention is to amplify the voltage of my FG for using it straight to my antenna for tuning purposes. But it will be also a tool for my bench.

I assumed that i won't need higher amperage than 15mA at my collector. What do you think about that guys? Please take a look to my calculations. Do you notice any mistake? In addition what values would you use for C1 and C3? My target freqs are between 4 and 10Mhz.

Thanks Jeg
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14105 on: May 08, 2016, 05:38:22 PM »
Hi.
It needs the same PCB design but in PDF format with inverted color in a laser printer black and white I wonder about the thermal transfer "toner"(I bought a printer and appropriate paper)
create a design from scratch it would take me forever (I fired a program to create a PCB) zzz
maybe someone already has the formula and could help?

Has anyone bothered to look at these, PCB's ? they don't match the circuitry and they both have components missing including all decoupling capacitors and regulators and chokes have fun,

Also watch this !  https://www.youtube.com/watch?v=GlPPzU-rqp4&feature=share

kolbacict

  • Hero Member
  • *****
  • Posts: 1418
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14106 on: May 08, 2016, 07:23:48 PM »
Thanks Tomtech :)
Looks interesting even i don't understand Russians. Can you or anybody else describe with few words the main point?
there is a certain Sufian from Morocco, it is his thoughts about the magic frequency.On perfectly speaks Russian, maybe he says and english.Try contact him.
Skype soufiane_mb.

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14107 on: May 08, 2016, 07:32:00 PM »
Also watch this !  https://www.youtube.com/watch?v=GlPPzU-rqp4&feature=share

If Dr. Greer would acknowlege my emails to him and reply with just the simple concept behind these free energy devices, I'd have it built and OpenSource'd to every member of this forum within six months.  But instead, he would rather get crowd funding to make movies and books.  You have to ask yourself, "Whose side is this guy really on?"

He is correct about one thing though, if we want to see this technology first-hand, we will have to develop it ourselves--there's no one out there that is going to help.

M@

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14108 on: May 08, 2016, 08:17:24 PM »
there is a certain Sufian from Morocco, it is his thoughts about the magic frequency.On perfectly speaks Russian, maybe he says and english.Try contact him.
Skype soufiane_mb.

Thanks kolbacict. It is just that I don't believe in magic frequencies in relation to Ruslan's and akula's devices.

 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14109 on: May 08, 2016, 10:00:53 PM »
Thanks kolbacict. It is just that I don't believe in magic frequencies in relation to Ruslan's and akula's devices.
it's very strange you should say that ! It's not the first time I've heard that remark, hmm I wonder if it's true ?

N20Wolf

  • Newbie
  • *
  • Posts: 17
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14110 on: May 08, 2016, 10:54:52 PM »
Hello Everybody! I spread the oscillator circuit, by Sergey Alekseev.  Download Torrent File - "БТГ - Бестопливные Генераторы, от Сергея Алексеева.rar.EX.UA". All information in the archive!

Download Link, on Torrent: https://yadi.sk/d/008VwSe4rAGQk

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14111 on: May 08, 2016, 10:56:07 PM »
  There may not be a specific magic frequency, as each self runner is running at different frequencies. And can still suppose ably self run, (if true).  But, there does seam to be an certain relation of frequencies for each circuit or device, to be a proper sync, with gain.
   
   I can't even get my Kacher working, still won't oscillate as it should. Now with new 2SC5200 transistors, barely lighting a CFL bulb, while getting too hot in one minute running. I changed every component a few times, and, I even rewound my Kacher secondary coil, thinking that it might be the problem. But, no change still.
 
   Jeg: Did you get your Kacher working right yet.  IF so, what was the problem when it won't oscillate?
  The Kacher driver is such a simple circuit,  but, it can be a real pain in the ass.  I hate it when that happens.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14112 on: May 08, 2016, 11:26:15 PM »

   I can't even get my Kacher working, still won't oscillate as it should. Now with new 2SC5200 transistors, barely lighting a CFL bulb, while getting too hot in one minute running.

Hi Nick
If you barely light a cfl bulb then your Katcher works. I mean don't wait more things with 24V power supply. Yes it gets hot. It is normal. But even with this small voltage we have seen a Ruslan's device working. Anyway. Still learning ;)

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14113 on: May 09, 2016, 12:00:07 AM »
Hi Guyz :)

Hope all is well.
For all, I have some videos I would Like to share,

Geofusion Effect 4 with Diode Bridge test with load
https://www.youtube.com/watch?v=OCBsSUmndcI

Geofusion The Original way, Akula way. !
https://www.youtube.com/watch?v=tKPm89wB-s0

Two videos here will show many differences, yet they work!
I could say now Ruslan and Akula (Roman ) Devices are real.
Just ppl need to replicate them right :). Good guidance is needed.
For the idea, I got 175V output at grenade, Bulbs are super hot, you feel heat radiation coming form them.
Thoughts on Roman way, Fine tuning is strongly required to get maximum here in comparison with Ruslan way.
Ofcourse AlexeeSergey's replication also reall thing there. :)


Itsu,
Nicee ;D saw your recordings and photo's of the new grenade with telsa windings on it , coax and inductor afterwards.
hope it works out :),
What I would like to see when you are stest driving these circuits is to hook them up to the mediator core 
(Toroid which provides input for both circuits ) to see effect happen! :) you can do it.
I have some vid for you here, take a look at it
It is important and can help you to see what needs to be achieved in signals
there are scope shots in this video.

https://www.youtube.com/watch?v=Sa30TbM6wak&feature=youtu.be

Same AM modulated signal you will see here and how he synch both signals.
This is where things start to happen :). take a good look.

This is also good one of Ruslan when he was still busy on the Dally Device,
Look at the mediator core inside the box, there is usefullness in this one

https://www.youtube.com/watch?v=m0ztyPxXcas



Nick,
you are  right, all system will vary on freq with modulations.
About Kacher Nick, Did you use my Diagram i posted befor? It has Kacher on it.
I think If it overheats instantly there is short somewhere...
Take a better look at the circuit, coiling should not be the problem and at first try to make a long Secondary at first.
try to make kacher without Beginning inductor which is provided in diagram
and without the 2 Diodes also. Let me know ;)


Cheerz~

beboszek

  • Newbie
  • *
  • Posts: 25
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14114 on: May 09, 2016, 10:16:22 AM »

[/font][/size]I can't even get my Kacher working, still won't oscillate as it should.  [/size]
[/font][/size]
Nick, if you want to explore setup with blocking oscillator, called "katcher" by all of you, then you can use circuit I'm attaching below in pdf. You need to achieve oscillograms like on the picture. When properly tuned, radiator is just warm.