Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718749 times)

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14010 on: April 28, 2016, 09:50:59 PM »
Hello Verpies

Yes, I did not think it was D2 that *clamped* the flyback spike on the *FET* (IGBT).  D2 must meet the DSRD criterion ( diode capacitance charging/discharging)  Shouldn't that be D1 (fast recovery diode) which clamps (re-routes) the flyback spike?
How much capacitance would be considered *sufficient* to demonstrate the DSRD effect?  The C4D20120 SiC has Ir=65uA @ Vr =1200V  & 175C and Qctotal=130nC @ Vr=800V.
Has anyone ever tried a SiC diode (as D2) in a DSRD setup just for shits & grins?
Maybe something new to try ;D
take care, peace
lost_bro

Hello All

" The quarter period of the L-C circuit must be shorter
than the diode recovery time for fast current turn-off. A
diode fully saturated with charges will have a delay to
turn-off given by the recovery time presented in the data
sheets and the actual turn-off time will be approximately a
third of this delay. Thus, the diode should not be
saturated, as the pulse width then will be unacceptably
long. "

Just answered my own question...... :)

take care, peace
lost_bro

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14011 on: April 28, 2016, 10:05:53 PM »
Lost, 

i think the reflected nano-pulse will be "seen" and being taken care of firstly by the D2 (KD226D) diode.
This is a 800V diode, so i could put 2 in series to handle that pulse, not sure what 2 dsrd diodes in series does to the nano-pulse itself.

Itsu

Good day Itsu

Found this is the above attachment in my last post:

"Higher amplitude can be generated by using series
connected diode
s. However, the saturable transformer
must be retuned for higher input voltages, as the time to
saturation is voltage dependent. This is not a trivial
matter, proper choice must be made between increased
number of turns or increasing the core area; none of
which can be made in a continuous manner. "

Looks promising for higher voltage swing at output.

and:

"The pulser has been tested at repetition rates up to 100
kH
z with resistive charging, higher repetition rates can be
achieved with resonant charging methods
at the cost of
increased complexity, especially in the area of optimizing
core reset. Ultimately the repetition rate is limited to
5 MHz by the duration of the charge transfer sequence."

So just maybe it is possible to reach higher pulse frequencies with *resonant charging methods*.

take care, peace
lost_bro

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14012 on: April 29, 2016, 07:01:39 AM »
Daly stated on his blog that the end of the 50 ohm coax was shorted (at least that's how Google Translate translates it):

"Далее обмотка коаксиалом 50 ом (ранее применялся в компьютерных сетях) получается бифиляр - конец обмотки закорочен - нагружен на генератор наносекундных импульсов."
Google Translation:
"Next, the winding 50 ohm coax (previously used in computer networks) obtained bifilar - end shorted winding - loaded to the generator of nanosecond pulses."

From:  http://www.liveinternet.ru/users/edward_lee/post235233940/
Yes, here corect translation. End is shorted. Dally also mentioning in video, that end of coaxial is shorted.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14013 on: April 29, 2016, 07:10:04 AM »

   
   I'm still having problems finding a transistor that will oscillate now (burnt my last good one), when making an Exciter/Kacher circuit.  I tried a fet, also, same thing, won't oscillate. Anyway, I'm taking a small 15inch Tv apart today, to see if I can scrounge some parts from it.
  I'd like to make a strong Exciter circuit but one that won't overheat the transistor. Ha!  As I'm always having the Kacher transistors getting way tooooo hot. And I don't want to use a fan, so, I'm thinking about Exciter circuits, like Nelsons, but maybe taking the idea and modifying it in my own way. I wouldn't want to just copy it...  As I can't, in any case.
   So, I'm still on the hunt for wild turkeys....  And, I haven't seen any down here, yet.
 
 
Use bigger radiator for kacher. Put on other radiator kacher radiator, if you not have one big radiator. Then heat you can save more you transistor.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14014 on: April 29, 2016, 07:13:02 AM »
@itsu if this continues very far, should start another thread.. BUT.


You have a sweet peek power there.  Isn't that what Tesla wanted?  A ultra short impulse? 
So, just for grins, one could at 15khz put a tesla primary to the impulse generator? and run it at low hertz... wasn't it very low frequencies tesla said he saw aura around coil?  (Not bright sparks, but more ambient... aura)
secondary should be highly insulated??  At 1.5kv input you're already going to be sparking if it was a 1:1 ratio?


(UWB radio?)


edit: Don't measure it... to see if you have a voltage drop of 1.5Kv, just trust that you did, and it's very low resistance seconary.. might ground the low side though...


also someone was making alternate dimension for everything basing all units in basic space-time units (m, s) such as E=IR and R is  1/t.... but come to think of it his units didn't work... maybe it is T-1 ?  anyway it causes a delay of current in a way so it backs up against a barrier and can be measured as voltage... should really just measure the current instead of voltage across resistor which I remembered just now you can also do.


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14015 on: April 29, 2016, 12:31:32 PM »
also someone was making alternate dimension for everything basing all units in basic space-time units (m, s)
That would be this guy.

such as E=IR and R is  1/t.... but come to think of it his units didn't work... maybe it is T-1 ?
It works out just fine:

Resistance is T2S-3
Voltage is T1S-2
Current is S1T-1

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14016 on: April 29, 2016, 12:44:20 PM »
Has anyone ever tried a SiC diode (as D2) in a DSRD setup just for shits & grins?
Maybe something new to try ;D
There was a scientist that made his own SiC diodes for that purpose.  His paper is available for free somewhere on the net.

As a reminder - DSR diodes must be PN diodes with diffuse junctions*, long carrier life times and long reverse conduction times.  For DSR operation, it does not matter if they have low capacitance and recover quickly from reverse blocking condition to forward conduction (trr).

DSR diodes cannot be Schottky diodes nor PIN diodes !!!   ...regardless whether they are made out of Si, SiC, GaAs or what not.

The inductive spike is the desired output of the nanopulser which occurs when the DSR diode stops conducting very high reverse current in an inductive circuit.  Suppressing the output would be counterproductive.

*Spherical PN junctions provide the fastest reverse current fall times, because the moving carrier depletion front has a spherical shape.  These stored long-life carriers are the reason why the diode conducts in reverse.  For the DSR operation we want these carriers to be exhausted abruptly across the entire surface of the junction. Unfortunately most contemporary diode junctions are planar and sharp (no diffuse PN gradient).   "Poorly" manufactured diodes, such as the old Russian rectifying diodes, had overetched-in non-sharp (diffuse) PN junctions and that's why they work better as DSR diodes today.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14017 on: April 29, 2016, 01:31:49 PM »
Yes, here corect translation. End is shorted. Dally also mentioning in video, that end of coaxial is shorted.
Ha Ha!

Is this it ?

NO TITLE

Monday, September 10, 2012 2:11 + to quote pad
Well, there was at least some clearance in this dark realm)). After numerous experiments, we managed to get a very good result. I always thought the main criterion for a successful operation without fuel generator is samozapitka. Yes, yes it is, it puts everything in its place! So I managed to get recycling of voltage and current, or rather to get the system fills, and even take a little surpluses. At first I wanted to write that this device has Kapanadze replication, but I do not know him genratora devices and so on this occasion did not say anything mogu.Hotya course is mechanical installation T.Kapanadze inspired me to work in this direction. I saw genrator SR but also can not say anything on it, I have not used ferrites, or rather they are but the main coil does not contain iron, they are only used in converters.
In my installation I do not use a spark or arc, in all their manifestations. Well now on, that is for installation: In installing two generators, one generator shakes the converter on a ferrite transformer for nanosecond pulse generator power and respectively supply the voltage to the coil, then coil: includes klastikovogo frame and comprises 3 windings, one winding - wire approximately 0.25 to 0.3 mm (just make out where I can only say it with precise measurements, once shook mini Tesla, then it is overgrown with additional windings in the experiments). Then on top of it winding wire 0,65mm (call it resonance, it is connected only to 1,5mkf x 400V capacitors). Further winding coax 50th (previously used in computer networks) obtained bifilyar - end shorted winding - loaded to the generator of nanosecond pulses. And on top of wound coil pickup. The coil pickup loaded on a diode bridge, after the diode bridge are capacitors (not necessarily polar polar! do not stand up and sewn or inflated for a few seconds!) after I loaded rectifier lamp 20 W, respectively, and of the power supply for samozapitki. But still, I have gained the power supply is only one of the four, the old aT. One did not work at all, the two quickly went out of order. The diode bridge between the condenser and the coil is required! Without it, there is no stability work! If someone would teach me circuitry - I know that the power supply is a diode bridge, but it works much better. In genratoru nanosecond pulses - I crossed two generators for a reason - not found tunnelgogo diode. The circuit is taken from here:


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14018 on: April 29, 2016, 04:14:21 PM »
Yes, here corect translation. End is shorted. Dally also mentioning in video, that end of coaxial is shorted.

Thanks for the confirmation Menof. What does 'самозапитка' mean? Google Translate
does not recognize this word.
... Ah OK, I think I figured it out. it seems it means 'self-running'.  :)



MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14019 on: April 29, 2016, 08:41:27 PM »
Thanks for the confirmation Menof. What does 'самозапитка' mean? Google Translate
does not recognize this word.
... Ah OK, I think I figured it out. it seems it means 'self-running'.  :)
Yes, selfrunning.

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14020 on: April 29, 2016, 10:35:59 PM »
Hi guyz :)

Well I uploaded a new Vid, wanted to show the comparison with what Ruslan Device is showing
and what I have on my setup When effect is in play :).

Geofusion New Mediator & effect 4
https://www.youtube.com/watch?v=XhblojKdU4Y

Ruslan Vid, Turning on and off kacher
https://www.youtube.com/watch?v=zEBLgIbxP3o&feature=youtu.be&t=1m21s

Enjoy :)

                      Cheerz!~

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14021 on: April 29, 2016, 10:40:50 PM »

First quick test with a (shorted) RG58 coax cable wrapped (27 turns on a 9cm former) around the inductor / part of grenade.

In the video i mention that the peak value has increased somewhat compared to the 50 Ohm resistor as the scope shows initially about 1.8KV, but thats because
it now also measures the reflected reversed signal. 
So the positive peak is still about 1.5KV like it was with the 50 Ohm resistor.

The reflected reversed peak is seen after a delay of 80ns pointing to a coax length of 8 meters (0.66 velocity factor).

Screenshot below shows the signal

When scoping the grenade output (unloaded) it shows a noisy signal with a peak of 70V, see video (2th part).
The inductor/capacitor series LC output shows a similar signal as the grenade, so we have some inductive/capactive coupling from coax to inductor/grenade.

   
Video here: https://www.youtube.com/watch?v=K4Fj7O0lgbk&feature=youtu.be

Itsu

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14022 on: April 29, 2016, 11:38:15 PM »
@Geo:
Nice video. I am not clear where you have the 'mediator' coil connected to which is wound on the other yoke core.
What are the two wires on your mediator coil connected to?
I hope you were wearing some shoes when making this video. :)


@Itsu:
Your new nano-pulser seems to be working really well.
I would guess you may be getting a higher peak voltage when connecting to the coax
winding because the nanopulser is seeing a somewhat reactive load at a different impedance.


Nice job guys...

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14023 on: April 29, 2016, 11:38:34 PM »
The reflected reversed peak is seen after a delay of 80ns pointing to a coax length of 8 meters (0.66 velocity factor).
That's to be expected.  80ns is the round-trip time.  Multiple reflections of progressively lower amplitude should follow the first reflected pulse, because the nanopulser apparently has lower than 50Ω output impedance and it re-reflects the reflected pulse coming back from the far end ...and they do.
What is the actual length of the coax?

It would be nice to see non-inverted reflections from an open-ended coax, too.

When scoping the grenade output (unloaded) it shows a noisy signal with a peak of 70V, see video (2th part).
The inductor/capacitor series LC output shows a similar signal as the grenade, so we have some inductive/capactive coupling from coax to inductor/grenade.
That is a little weird because there are quiet periods between the reflected pulses in the coax but no quiet periods in the grenade output, so it is not an exact copy of that signal (thus not only a direct coupling) so something else is going on, too.

Also, the 60Vp-p inductive/capactive coupling from a shorted coax to inductor/grenade is weird in itself.  I'd like to read a physical explanation of that.  I hope I will not read "leaky coax" or "scalar waves" ...err "pseudoscalar waves" ;)

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14024 on: April 30, 2016, 12:06:01 AM »
@Itsu

At the risk of being yelled at by Nick and other Aether aficionados, I'd like to suggest that you put a fuel rod (an iron or copper pipe/rod) inside the grenade and run some current ALONG it, while bringing large permanent magnets nearby, because I think that there might be something similar to the diagram below where your nanopulser and coax can take the place of the the 500VAC RF amplifier.

Support structure and low reluctance path as well as the 0.5T polarizing coil are too much work so if you skip them you can hope that a strong magnet can make up for their absence.

You can try that after all else fails to make any extra energy.