Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717604 times)

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13755 on: April 19, 2016, 08:18:06 PM »
Hi D-1. The red and black output wires on that side of the device are the low voltage output wires.
He was able to power the 24VDC motor with that output, so the red and black output wires are
maybe somewhere in the vicinity of 24VDC or thereabouts.

Thanks Void.  I feel better now that we aren't looking at some strange mystery.

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13756 on: April 19, 2016, 08:30:03 PM »
I don't see a switch at the full bridge rectifier on Nelson's device (funny with friends video).

But that switch connection looks kinda odd. Besides, how many diode bridges are needed to make it work?

Next intriguing question please:

When (or if?) an arc welder can make a meter running backwards, then why not each and every arc welder? What makes the difference?

A capacitor perhaps? Could it be sometimes there is a capacitor connected in parallel to mains for PFC and then it goes into resonance at 100Hz or something like that?

Nonetheless I can't see any high voltage here. So do we need it or do we not need it?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13757 on: April 19, 2016, 09:07:25 PM »
  Zeit:
  What "switch connection"? I see no switch there.
  At higher output the commercially made full bridge rectifiers will over-heat.
  Nelson's boxed device is low output, low wattage, lighting a small incandescent bulb, or small motors. So those rectifiers will work to some degree, but are not ideal, in any case, as his device is running at about 3khz, or so.
   Akula first video device used a commercial full bridge rectifier, which overheated in no time. As they are not meant to work at higher frequencies than the normal 50 or 60 hertz. That's why they were replaced on Ruslan's devices with more adequate high amp, high voltage, fast switching  rectifier diodes, instead. However, even those will over heat and melt their solder points, at 4000w output, such as on Ruslan's last device, and can cause the device to stop working. Therefore, Ruslan disconnected the second bank of light bulbs, before that happens.
   
  Magnetic current is non-shocking, even while lighting kW's of bulbs.  But, adding capacitors can change that, and cause shocks to be felt.
   Even when using a one volt battery as a power source, very intense shocks can be induced, such as from a small Joule Thief circuit, when a leyden jar is added to it's output. The addition of an earth ground line can also add to the effect.
  There lies the secret, perhaps...  As a capacitor is the Aether converter to use-able power.  At least those are my thoughts about it.    Opinions, anyone?
 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13758 on: April 19, 2016, 10:00:33 PM »
Thanks Void.  I feel better now that we aren't looking at some strange mystery.

Well of course if his device really is self running then there is still something unusual going on there. :)


Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13759 on: April 19, 2016, 11:10:22 PM »
So those rectifiers will work to some degree, but are not ideal, in any case, as his device is running at about 3khz, or so.

There is no problem when electric energy is usually converted at 50Hz (mechanic into electric field into magnetic field and vise versa). Then why should we need more than 50 Hz standard grid frequency when we want to convert energy taken from the aether or the ground?

What "switch connection"? I see no switch there.

I see 3 switches. Did I miss one?

Number 3 seems to short a diode bridge.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13760 on: April 20, 2016, 12:11:37 AM »
   Zeit:
   You'll have to ask Nelson concerning the switches that you see. As we don't know just how he has everything wired, nor has he  provided any schematics, or detailed instructions concerning it's operation.
  You had mentioned a "switch connection" at the rectifier, previously, and I answered that I see no switch there, just tuning caps similar to what Geo has done.
   You also asked why we need more than the standard 50 hertz rectifier when dealing with the conversion of Aether to use able power, such as to run conventional devices. Because the Aether is not running at 50 hertz frequency like the grid is.  And conventional full bridge rectifiers can be limiting the available energy that can be be tapped from it.  But, the main reason is that the normal full bridge rectifiers will overheat, at higher output. And is also one of the limiting factors in the output of such devices, especially for the devices with higher kw outputs.
  Possibly Verpies can best answer some of those questions, in a conventional way.

   The thing that I see in ALL of these type of self runners is, that they all are using an impulse circuit of one form or another to create an impulse wave that will affect the surrounding ambient. And there are three things in common with all of those circuits. They all require coils, capacitors, a spark gap (or a solid state circuit) to create and extract the Aether, then convert it to use able energy.  Although many people will still not believe it, as we have been taught, even to this day, to disregard all this as just nonsense. 

   

nelsonrochaa

  • Hero Member
  • *****
  • Posts: 653
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13761 on: April 20, 2016, 12:23:12 AM »

Hi , only to stop with speculation about what make the switches because some of the things that i ear bit some strange  to so qualified people  :)  :
 
Number 1 short system oscillation circuit to stop the circuit .

Number 2 is even not connected (box are salvaged and that switch prevent original circuit work when top is opened )  but not used to nothing.

Number 3 not short anything only able to activate one particular item in circuit to provide double of voltage output about 600v.  (in the video i show that )  when run the motor.

about  Bridges are convencional 50hz and are not connected directly in  the output transformer  , but in  step down stage, in main storage capacitor  so , i never destroy anyone of the bridges, even i know not the best bridges to use but is what i have available in that time  .

About put my fingers without take a pummeled  :) :

The output that Doug talk is 32v so no "blim" but even the high voltage output without have  the step down stage and stored in the cap output don't give "blim" too ;
 of course after stored in cap will be letal for sure . but we will not letal if we learn to control  and it not stored in  capacitor . One year ago
https://www.youtube.com/watch?v=Is9fOtBeo_I is one of the stages used in the main box  that could be find in the photo . If someone are really  interest see all the video and what i show and  will see that i not get pummeled  even with voltages around 800v rms.

  In the channel  the people interested will   find all the stages until i reach that box month to month ,  until i stop put videos is like a book , but most only search the GOLD and forget the work behind....
I start with nothing ! just work with lab work without equipment and material only search  to old pcb to salvaged components .
 I was not born in a golden cradle and even that with cunning and ingenuity adapted the materials he had. but most of people have almost resources and even that only teorize . GO WORK TO BENCH  !   
 


   

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13762 on: April 20, 2016, 12:37:24 AM »
If someone are really  interest see all the video and what i show and  will see that i not get pummeled  even with voltages around 800v rms.

Hi Nelson.  Aye, high voltage AC in the high frequency range (above about 10 kHz at the least) is more apt to cause skin burns
than big shocks, although in some cases it can cause shocks as well. The higher the current capacity, the higher the risk
of shocks. The output of lower power tesla coils can be several thousand volts but the current capacity at the high voltage
end of the tesla coil secondary is relatively small if the HV end of the secondary wire is contacted directly. It all depends on how
you are taking the output off of the high voltage coil or transformer however. I have received shocks from the battery terminals
of a kacher driver in some cases, as the battery is getting fed back with higher current at high enough voltages to cause shocks
from the 'grounded' end of the tesla coil secondary. People who think that tesla coils and other high frequency HV devices can't give
shocks may be in for a big shock someday (pun intended). ;D It is very much about current capacity at the point in the circuit you are making
contact with, and how you are making contact with your body.



nelsonrochaa

  • Hero Member
  • *****
  • Posts: 653
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13763 on: April 20, 2016, 12:46:09 AM »
Hi Nelson.  Aye, high voltage AC in the high frequency range (above about 10 kHz at the least) is more apt to cause skin burns
than big shocks, although in some cases it can cause shocks as well. The higher the current capacity, the higher the risk
of shocks. The output of lower power tesla coils can be several thousand volts but the current capacity at the high voltage
end of the tesla coil secondary is relatively small if the HV end of the secondary wire is contacted directly. It all depends on how
you are taking the output off of the high voltage coil or transformer however. I have received shocks from the battery terminals
of a kacher driver in some cases, as the battery is getting fed back with higher current at high enough voltages to cause shocks
from the 'grounded' end of the tesla coil secondary. People who think that tesla coils and other high frequency HV devices can't give
shocks may be in for a big shock someday (pun intended). ;D It is very much about current capacity at the point in the circuit you are making
contact with, and how you are making contact with your body.

Hi,
I know about that points that you refer like the feed back ;) i already burn a power source because that .And you could see how much is return to power source in the second channel :) even disconnected . The important thing that you tell :

 It all depends on how
you are taking the output off of the high voltage coil or transformer however ;)

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13764 on: April 20, 2016, 12:50:04 AM »
Hi , only to stop with speculation about what make the switches because some of the things that i ear bit some strange  to so qualified people  :)  :

You are sure there is no hidden battery anywhere in the box?

And all those components are really needed in order to make it self-running?

In the channel  the people interested will   find all the stages until i reach that box month to month

Wouldn't it be more straight forward to provide a plain schematic?

You also asked why we need more than the standard 50 hertz rectifier when dealing with the conversion of Aether to use able power, such as to run conventional devices. Because the Aether is not running at 50 hertz frequency like the grid is.

A catchment lake is also not running at 50Hz, nevertheless it is possible to get electric current at 50Hz out of it.

nelsonrochaa

  • Hero Member
  • *****
  • Posts: 653
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13765 on: April 20, 2016, 12:59:39 AM »
You are sure there is no hidden battery anywhere in the box?

And all those components are really needed in order to make it self-running?

Wouldn't it be more straight forward to provide a plain schematic?

A catchment lake is also not running at 50Hz, nevertheless it is possible to get electric current at 50Hz out of it.

About you first question :
i don't have sure a,bout that lol  but you have ;)

If all that components are need ?
Not all but in that time i think that ever component is need and the box is small to put everything , ;)

About a schematic  :
you really are a joker   ;) but i like persons with sense of humor .

about your last question :

If you say ... that's ok i will even discussed that with you is not my goal is your goal !

Good luck

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13766 on: April 20, 2016, 01:32:17 AM »
Nelson:  It looks  your HV is created by a HV module.
In other words a HV module you can by from China?


Is that correct?

Zeitmaschine

  • Hero Member
  • *****
  • Posts: 1267
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13767 on: April 20, 2016, 01:40:31 AM »
If all that components are need ?
Not all but in that time i think that ever component is need and the box is small to put everything , ;)

This looks somewhat over-complicated to me. Kapanadze generates 5KW out of a small tin can without sophisticated electronics. Maybe you doing something wrong here since you need all these parts for less than 5KW?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13768 on: April 20, 2016, 01:44:11 AM »
 So, Nelson,  I "go work to bench"... and find that I'm able to reproduce your effects just now, on my Kacher/grenade circuit (without the induction circuit connected). The only thing that I can't do is to have no current flowing from my PS, as it's not adjustable.
 In any case, I was able to light a 10w incandescent bulb between the aluminum sheet (placed on top of the antenna coil), and the earth ground. Which I can't do otherwise. As I'm using a not adequate weak transistor on the Kacher circuit now, until I can get the right one.  I was also able to light a neon bulb, and CFL bulb. I'm looking for my 20w 220v microwave bulb now, to try that next.
  I'm always grateful for ANY information that you can provide.
 
   BTW: I've seen most all of your videos, and some of them several times. I can also understand your language to some degree, as I also can speak Spanish, and there are many similarities as both languages are Latin based.
   Thanks again,
                        Pura Vida,
                                         NickZ, 
                                                   Costa Rica.
 

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #13769 on: April 20, 2016, 02:25:54 AM »
This looks somewhat over-complicated to me. Kapanadze generates 5KW out of a small tin can without sophisticated electronics. Maybe you doing something wrong here since you need all these parts for less than 5KW?

   Or he's doing something very right, as he is using no current to do what he has shown, only fluffy voltage.
 Unlike TK with his big car battery, and inverter, etz...  Just how many components do you think are in that inverter, alone?

   Look at the simple Kacher circuit that can generate kWs (made by Roma), using NO external input source, nor any ground.
 That is the direction this all can take. But, the first thing is to obtain the amplification "effect".