Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718223 times)

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12750 on: March 15, 2016, 04:33:36 PM »
After I eye ball several time at these videos I draw my own schematic. See attachment.
Look very smart design in simplification and efficiency assuming is not a hoax.

I commend your effort trying to decipher the circuit schematic of this device.

What I see has me cautious of its accuracy.  The main item that stands out is the circuit path of the load.  You will notice it traverses the secondary of the coil on the left which probably has relatively small conductor wire.  Hard to imagine 2000 watts passing through this wire without it immediately bursting into flames.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12751 on: March 15, 2016, 05:53:20 PM »
Nick, Geo. Regarding the video with the guy lighting the light bulb on the shovel,
I have done some more testing and the best I could get a kacher circuit to light up
at fairly low input power was to partially light a tiny 12V, 0.75 Watt bulb. That guy in
the video must be driving the tesla coil with some sort of special pulsing or something
along those lines. At any rate, based on my tests,  a kacher driver will just not do what is shown
in that video. :)

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12752 on: March 15, 2016, 06:04:39 PM »
After I eye ball several time at these videos I draw my own schematic. See attachment.
Look very smart design in simplification and efficiency assuming is not a hoax.

Hi skywalker66. Here is a link to an earlier device with a bit different configuration, which
seems to be by the same guy. According to the comments for this video, the guy's name
is supposedly Андрей Брюховецкий (Andrew Bryukhovetsky), and I think they are saying
he is from the Ukraine. As in the other videos, the guy covers up portions of the circuit to
hide what he doing.
http://www.youtube.com/watch?v=8GMmIslMhrg

P.S. If this guy's devices are not fakes, then it would seem that he has figured out the Kapanadze effect. :)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12753 on: March 15, 2016, 06:15:30 PM »
Yes I found that one-two off one of the other threads, Just look at the battery cables 200 amp do you think ?

One coil is the TX and the other could be RX and a spark gap ?

I don't think I will be4 investing in it thanks ;)

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12754 on: March 15, 2016, 06:35:14 PM »
I need to understand that so my upcoming PLL circuit will not lock onto the wrong frequency.


Good day Verpies

I am looking forward to seeing your PLL implementation.......

take care, peace
lost_bro


justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12755 on: March 15, 2016, 08:13:05 PM »
After I eye ball several time at these videos I draw my own schematic. See attachment.
Look very smart design in simplification and efficiency assuming is not a hoax.

thank you skywalker66 for redrawing the circuit.
To add on to info ,we have seen 90% similar  circuit from akula0083 long time back .

justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12756 on: March 15, 2016, 08:33:36 PM »
This is another video from Freeenergylt youtube channel.

Where some people is showing they can extract more power from kacker like circuit.

https://www.youtube.com/watch?v=9XelxZeEMDs

Where to drive the telsa primary we can use "GeoFusion; Don Smith partial replication Cloud version" circuit
https://www.youtube.com/watch?v=M-El9ObHCF0

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12757 on: March 15, 2016, 09:04:02 PM »
I commend your effort trying to decipher the circuit schematic of this device.

What I see has me cautious of its accuracy.  The main item that stands out is the circuit path of the load.  You will notice it traverses the secondary of the coil on the left which probably has relatively small conductor wire.  Hard to imagine 2000 watts passing through this wire without it immediately bursting into flames.

You meant it closed thru kacher secondary ? In deed, I worried about too. At the bottom of secondary kacher is current node, the maximum amplitude of current from entire secondary kacer. He may used a thicker magnet wire on his kacher like 0.8 - 1.2 mm, or just thicker for first part of kacher then follow by thin wire till bottom. I have a hunch he don't direct connect top of kacher to cooper pipe coil from the right side (on the "mixing coils") like it appear from video, but using a split cooper screen inside top of kacher. What you think about that ?
And his kacher it may be low frequency modulated.
I must admit, this device is closest replication of Kapanadze, and I tend to give it a chance of genuine. Nevertheless there remain some unknowns like blue cylinder, which I suspect is a hv home made capacitor, or a bank of capacitors inside. Therefore secondary coil from the kacher act like a current source (see 3turn secondary on yoke in ruslan-akula crt) for series resonant circuit consisting of blue cylinder (supposed to be a capacitor) and a induction coil on the left coil assembly. You see, blue coils assembly acts like grenade+ inductor+antenna  from Ruslan where high voltage with high current is mixed together.

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12758 on: March 15, 2016, 09:11:43 PM »
The main item that stands out is the circuit path of the load.  You will notice it traverses the secondary of the coil on the left which probably has relatively small conductor wire.  Hard to imagine 2000 watts passing through this wire without it immediately bursting into flames.

Try don't see this crt as a classic one where the current is the same all over the place if there is not branches, where is safe to put ohm law at work. You know in Kacher secondary current is at max at bottom, and min at top, so no Ohm there...

justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12759 on: March 15, 2016, 09:13:31 PM »
now compare the 200 watt device with Ruslan or Akula device.
I think the circuit diagram speak for itself

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12760 on: March 15, 2016, 09:31:35 PM »
Hi skywalker66. Here is a link to an earlier device with a bit different configuration, which
seems to be by the same guy. According to the comments for this video, the guy's name
is supposedly Андрей Брюховецкий (Andrew Bryukhovetsky), and I think they are saying
he is from the Ukraine. As in the other videos, the guy covers up portions of the circuit to
hide what he doing.
http://www.youtube.com/watch?v=8GMmIslMhrg

P.S. If this guy's devices are not fakes, then it would seem that he has figured out the Kapanadze effect. :)

Thanks Void ! I Already take note on that video too, and pass thru a couple of time.
In this earlier device appear to be no connection between the two coil assembly like in second device.
It is completely "wireless". With that part the guy has beaten Kapanadze  :) 
Yes, the nasty part is all these guys have something to cover up in their devices where magic happens in safety of others eyes.     

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12761 on: March 15, 2016, 09:43:10 PM »
Interesting video Geo. The video is pretty blurry, but it looks like the power supply is
showing 11 volts at about 0.14 to 0.15 amps. If that is correct, then that is a power draw of about
1.65 watts. I don't speak Russian, but I think he is saying that the light bulb is rated at 220 volt, 65 watts?
Could a light bulb of that small size be 65 watts, or did I misunderstand what the light bulb wattage rating is?

The light bulb does seem to be lighting quite brightly, but it is hard to tell for sure how bright a light bulb really is
in videos, so how much actual power the light bulb is consuming is another matter, but I am going to have to try this
myself, and see how bright I can light up a light bulb with a similar setup. :)

Here are 2 more videos of this guy:

https://drive.google.com/file/d/0B3MWZcYwMLYobE85TWhGdWNuTnM/view?usp=sharing
https://drive.google.com/file/d/0B3MWZcYwMLYoMUEzSUR5cFdzanM/view?usp=sharing


skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12762 on: March 15, 2016, 09:46:13 PM »
thank you skywalker66 for redrawing the circuit.
To add on to info ,we have seen 90% similar  circuit from akula0083 long time back .

You will find similarities with Ruslan latest devices too, Kapanadze in special, and others.
Yes, there begin to form a pattern for these devices.
Sooner or latter that pattern will be too obvious to overlook.   

justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12763 on: March 15, 2016, 11:26:12 PM »
May be instead of using tesla coil ,we can use ferrite core like lasersaber did for joule thief or use a push pull yoke setup like Ruslan or Akula
I believe the circuit does not need kacker or tesla coil to make free energy .

All those are interested ,please go through the circuit i posted till now and video , and please put in your idea.
Time being lets think the person who made the video is not hoax.

Please see my latest circuit based on all the previous circuit.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12764 on: March 15, 2016, 11:34:58 PM »
All those are interested ,please go through the circuit i posted till now and video , and please put in your idea.
Time being lets think the person who made the video is not hoax.
Well, the fully filled sinus wave with HV side of same frequency won't do any good to start with.
It is not just random 2 signals mixing for having more than just noise on the output. Ruslan's, akula's translations and my posts are already in this thread. You can try at  least understand what was being said there.
And most importantly it is best to test circuit before randomly attaching it here. That will save everyone's time who will try to follow it.

Cheers!