Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719283 times)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12690 on: March 11, 2016, 10:54:50 PM »
Yes, and the C3 and C4 capacitors need not be rated 160V.  Mere 50V would be enough and lower voltage caps have better ESR, too.


I agree with Itsu about the the MOSFETs' wire layout.  Also, I hope you are using this schematic to connect the W1 windings to C3, C4, D3, D4, GND and VCC.  The EMI chokes L1, L2, L3 before the filter caps are a very good idea, too.
I am pretty sure that if you had copied  Itsu's transistor and driver connections layout, then you'd be rid of these spikes.

Thanks Itsu, Verpies
I'll try to improve layout and make the changes. What do you think about using insulated core mesh wire for driving gates? Grounded only at one side. 

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12691 on: March 11, 2016, 11:12:21 PM »
Thanks Itsu, Verpies
I'll try to improve layout and make the changes. What do you think about using insulated core mesh wire for driving gates? Grounded only at one side.

Jeg,

no idea what insulated core mesh wire is, but i use some RG316 coax cable between the TL494 output to the MOSFET driver input but grounded at both sides.
I don't think its generally a good idea to ground only 1 side, you might create some resonance points that way.

Again, my MOSFET drivers are directly soldered with their (2) ground lugs (bend backwards) to the MOSFET source leg to minimize the loop there.

Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12692 on: March 11, 2016, 11:13:23 PM »
You are not wrong and neither is Itsu.
It should be 48V in reference to ground.
Yes, and the C3 and C4 capacitors need not be rated 160V.  Mere 50V would be enough and lower voltage caps have better ESR, too.


I agree with Itsu about the the MOSFETs' wire layout.  Also, I hope you are using this schematic to connect the W1 windings to C3, C4, D3, D4, GND and VCC.  The EMI chokes L1, L2, L3 before the filter caps are a very good idea, too.
I am pretty sure that if you had copied  Itsu's transistor and driver connections layout, then you'd be rid of these spikes.

Confirmed, its a straight 24V DC across the + / - of the electrolytic cap, and a 48V square wave across the + of the electrolytic cap and ground.

Itsu

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12693 on: March 12, 2016, 06:37:33 AM »
Jeg,

no idea what insulated core mesh wire is, but i use some RG316 coax cable between the TL494 output to the MOSFET driver input but grounded at both sides.
I don't think its generally a good idea to ground only 1 side, you might create some resonance points that way.

Again, my MOSFET drivers are directly soldered with their (2) ground lugs (bend backwards) to the MOSFET source leg to minimize the loop there.

Itsu

Insulated core mesh wire =  :D Coax cable (Sorry for my English)
The distance between 494 and my drivers is close to nothing. I'll use some coax between IR2110 outputs up to my mosfet gates which are long wires. I thought that by soldering both ends of ground shield, a ground loop might be appeared. I'll test it anyway.

You did a good work on minimizing this loop. It is a pity i can't proceed this way with my current experimental layout. But it is always a good idea for my next push pull build.

Thanks


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12694 on: March 12, 2016, 01:46:14 PM »
Insulated core mesh wire =  :D Coax cable (Sorry for my English)
The distance between 494 and my drivers is close to nothing. I'll use some coax between IR2110 outputs up to my mosfet gates which are long wires. I thought that by soldering both ends of ground shield, a ground loop might be appeared. I'll test it anyway.
:o
You really should read this article before you start.

There is a special section 12.10.1 there about sending signals down coaxial cables, but I recommend reading the other sections, too.

Whatever you do, your first order of the day should be modifying the circuit layout and its cabling to stop these spikes from appearing at your gates.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12695 on: March 12, 2016, 04:38:37 PM »
I spoke yesterday with my friend Arunas. T-1000
 I do thank you  guys for recent links: however  prior to  that discussion I did find that there is certain inconsistency   in   the text  of  E Bayeles.
http://www.electrogravity.com/EnergyPipeProof/EnergyPipeProof.pdf





While I was looking at his video it stroked me something  unusual.
 And that unusual part was  - nothing you could think of it in a critical manner. Thus video was sexless. https://www.youtube.com/watch?v=OR4-7w8Acd4
Only a while later  I start to see the smartens of the guy  forming delusion to himself as well.
The simplicity of measurement  usually indicates ongoing  processes,
 but that simplicity  do not make certain for the perception of an individual  that resulting interpretation is correct.( not enough data no words about permeability and so on.)
Illusion created by Illusionist  is based on the same principals.  But the interesting here is that we know about  his intention  prior to the trick.


 
The hardest part  for perception is when  The guy believes by himself in phenomena he presents to the crowd.
Than crowd might  fall into the same rabbit hole  and that is being called
 
-RELIGION... if phenomena is never explained, and some people still intend to accept  it as value to fallow.
-Bullshit …. if phenomena was found  contradicting  to its claimed  origin .( explanation)  vs, known proven one.
- Discovery if phenomena  was found explained as novel form of processing  or existence.
-Known if phenomena was found conforming presence of known mechanism
 




 So As always I turn for help to Dr Roy  the friend of mine.
 Please remember that  there are only opinions expressed  and ultimate truth is yet to be  found and confirmed if any.
Usually there is a need for significance of aftershock following certain events( videos,  scientific paper) that keeps the story flowing.
 

Yesterday I spoke to my Wife Ania.( psychologist)
She gave me an  example of hoe the perception can be redirected:


if one person says
Quote
that is right
and for other people says
Quote
that is wrong
The first person is less likely to fallow his/her path of thinking and is being discouraged or start to put  it in doubt.
The problem we may have with   E Bayeles. is that he believes in his thinking patterns. He was not exposed to criticism in sufficient form.
The good  of  Mr. E Bayeles. is that  he opens the door  for  us - for digging  around.
AND THAT IS THE NATURE OF PROGRESS.
So at least that is  what I can credit him for.




 Here is what Dr Roy thinks:
I think that we have explored this kind of 'Rabbit Hole' before, but what the heck.
(This all seems reminiscent of Tom Bearden's 'pseudo-discoveries'
Mr. Bayles has numerous dubious belief/theories. He seems to believe that the designers of the Ancient Great Pyramid of Giza "understood quantum structure and incorporated the fact into pyramid design". Apparently he believes Giza acted as an enormous energy generating device to power heavy stone levitation as well as mysterious, amazing machines which are no where to be found (perhaps the 'mole men' occupying the hollow Earth have secreted them away to their catacombs, or it could be invisible Martians...).
I offer you this single paragraph to highlight the meaningless drivel that Jerry E. Bayles shoves together in his game of pseudo-physics madlibs:
http://www.electrogravity.com/
"The first part, "Particle Field Energy Down-Scaling Via A new Complex Fine Structure Constant", pages 1-26, introduces a new complex fine structure constant which is used to create 10 down-scaled energy dimensions which further arrives at the least quantum electrogravitational  velocity equal to the square root of the ordinary fine structure constant in meter/second units. The new complex fine structure constant is based on an imaginary value for the square root of the Golden Ratio used as a power series with the fine structure constant. The fine structure constant is derived from the slight difference at 90 degrees between the Natural Spiral based on (e) and the square root of the golden ratio. Also, independent of proton mass calculations, connects the first complex energy reduction to the geometry of the proton's necessary field velocity and mass ratio above the electron mass. Finally, derives the necessary field considerations for justifying that the Great Pyramid at Giza was most likely a giant acoustical/electric power generator based on the square root of the Golden Ratio.  Paper is a significant extension  of  "The Golden Ratio And The Fine Structure Constant" which is listed below."
Humbug, pure humbug!






Back to 'real science':   



The Magnetic Vector Potential A, is another way of expressing a fundamental concept - in this case the 'curl' of the Magnetic Vector Potential A is the Magnetic Field Vector B. Maxwell's equations can be written in the form of the Magnetic Field Vector B OR the Magnetic Vector Potential A
(https://ci3.googleusercontent.com/proxy/eDpZ0lB5m0hWQ94fAdMVaeFmh-5aCPJvmdy0dHV16ZnQ-HM-4QBEB7Chvz3FakRM_siHtrQ5j6tjfCi10nXhefNMrWZOI0Xfooa82437RbmOmL_rYSuEy_BQYEhKTJRC8Hc=s0-d-e1-ft#https://upload.wikimedia.org/math/6/d/4/6d4db10348ec9698eafd3b26a37c557b.png)
The Magnetic Vector Potential A is used in classical mechanics in Lagrangian equations and in Quantum Mechanics. Vector A is just the 'other side of the coin' when it comes to Vector B.
I have no idea why Mr. Bayles believes that his experiment would indicate a more fundamental basis for Magnetic Vector Potential over Magnetic Vector Field. I am not even sure what his YouTube is supposed to show. Transformers couple inductively by magnetic fields, and Mr. Bayles hasn't proven that his 'iron pipe' offers any magnetic shielding (what is its permeability? ??? ??).
This is like showing that water passes through a piece of cheesecloth, and announcing that this is the 'proof' that anti gravity devices are feasible.
Gravity is NOT an aspect of electromagnetic-dynamic theory, not a classical one from Maxwell's Equation, nor a Quantum Electrodynamic one. Mr. Bayles will not be visiting Stockholm to pick up his Nobel Prize any time soon.
Mr. Bayles' 'Rabbit Hole' would appear to be very deep and very narrow, and yet not supported by anything real... It is surprising that it hasn't 'buried him' yet.
The Grand Unified Theory is still out there to be discovered!
As my wise old Filipino Cardiology instructor said when she detected a normal EKG with meaningless technical artifacts:
"Gornishtmitgornisht"








Thank you Dr Roy for expressing your opinion


Wesley

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12696 on: March 12, 2016, 05:33:12 PM »
I did find that there is certain inconsistency   in   the text  of  E Bayeles.


Hi Wesley. I am not seeing the link between what you wrote and Kapanadze/Daly/Akula devices.
Did you post this in the wrong thread, or what was your point?

I think it is a given that there is lots of nonsense in this world, and people should always
beware of unsubstantiated claims and outright pure whacky claims; but, on the other side of the coin, people
who hold the current body of knowledge of modern day science and its associated perspectives as some sort of immutable
carved in stone laws and truths (instead of models) are equally prone to being lead down the garden path by their beliefs.
Beliefs are beliefs are beliefs, regardless of what the beliefs may be. ;)

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12697 on: March 12, 2016, 05:37:00 PM »
That is correct I post it in wrong thread
Sorry
Wesley

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12698 on: March 12, 2016, 05:47:53 PM »
hi Verpies,

Using Spectrum Analyzer of mine under "Auto Correlation" setting on kapanadze winding which was assembled months back.

The waveform which was taken at reading at around 746.8x khz which i can't fully understand.

The resonance of the kapanadze winding is approx 1.2Mhz.

I have attached 2 screen video to show you what i meant.Under the 1st video at 13sec.

video colour was removed to reduce file size.

I have attached of screenshot image.jpg running at other frequencies 779khz as example which appear normal for me.

------------------------------
No time to commence actual test after all it's Sat. :D

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12699 on: March 12, 2016, 05:48:25 PM »
No worries Wesley.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12700 on: March 12, 2016, 07:26:12 PM »
Using Spectrum Analyzer of mine under "Auto Correlation" setting on kapanadze winding which was assembled months back.
The waveform which was taken at reading at around 746.8x khz which i can't fully understand.
This a mathematical tool used by your analyzer to identify repeating patterns, periodic signals obscured by noise, or missing fundamental frequency in a signal implied by its harmonic frequencies.

It works by multiplying the analyzed signal with a time shifted version of itself.  Of course the magnitude of that time shift can be varied and that is what you see your scope doing.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12701 on: March 13, 2016, 07:19:49 AM »
This a mathematical tool used by your analyzer to identify repeating patterns, periodic signals obscured by noise, or missing fundamental frequency in a signal implied by its harmonic frequencies.

It works by multiplying the analyzed signal with a time shifted version of itself.  Of course the magnitude of that time shift can be varied and that is what you see your scope doing.

hi verpies,

Thanks for the reply.

To be honest i was trying hard to search for presence of longitudinal wave like compression and refraction.

This was released by stivep related to the experiment conducted in Lithuania related to the yoke core.There was a video shown on how to observe for longitudinal wave.

------------------------------------------------------
Just stared experiment this afternoon with usual 2x0.47uf Wima capacitor in parallel from 3 turns.The output of multi-layer/kapanadze  coil with 0.1uf 2000volts capacitor in parallel with 60watt bulb.
4 layers total around 90turns which give 320uH and Kapanadze coil base on spec which many of us are using is exactly 160uH.

As usual this was reverse engineered from one of Akula video after observing the height(4 layers) which the same height as the multi-layer coil. :D
Take note indutance reading is 2:1 320/160 for my case.

But this times 28turns from toroid is untouched and insulated since i am running PWM generator at 250VDC (12 to 220volts pocket inverter).

The resonance remains same at 14.4khz but i am doing 28.8khz which then needs 35watt from 12volts battery.

Once the transponder circuit is powered up later the bulb would light like URFA setup/effect.After which the power drawn should remains constant regardless bulb or no bulb connected.If it goes according to plan.

My old PCB circuit uses more power because i was using IGBT which got higher switching lost compared to Silicon Carbide Mosfet of the same voltage rating 1.2kv.

starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12702 on: March 13, 2016, 05:53:22 PM »
Hi Star,

as mentioned above, i did use "normalize" and now added a 10dB attenuator in the TG lead to compensate for any impedance mismatches.

The first screenshot show a 0Hz - 5Mhz (really 9KHz - 5MHz) spectrum width  and the second one a 0Hz - 50KHz (really 9Khz - 50KHz) spectrum width.
I had to reduce the bandwidth (RBW) for the 2th situation from 30KHz to 1Khz to have some decend response.
Notice also that the 2th screenshot is very close to the spectrum analyzer start limit (9KHz), so these fluctuating lines at the start are not stable and are really fluctuating.

Itsu


Notice the attenuation as the frequency increases, the yoke core is optimized in its composition to provide a better response to the lower frequency spectrum as I suspected. as the frequency increases, the Tesla or nano pulse the cores response curve is reduced thus reducing the influence it has on it, a natural filter of sorts to reduce a back feed into the fets.

This reinforces my idea that the ferrite core used must be chosen carefully to only be responsive to the drive frequency and not the source mixing frequency (nano pulse or Tesla coil operating frequency). The point I am making is to not use any old core but be aware of its designed response curve.

justawatt

  • Sr. Member
  • ****
  • Posts: 293
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12703 on: March 13, 2016, 06:06:42 PM »
hi everyone
check out this circuit and see the video link
maybe this could be the last thing we can try to get free energy.
the video does not belong to me.
But i have made circuit based on the video ,i would like some one to try this circuit.

https://www.youtube.com/watch?v=5K3HrhH5Qrs

https://www.youtube.com/watch?v=RUF7eJAOjF4

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #12704 on: March 13, 2016, 07:52:20 PM »
This reinforces my idea that the ferrite core used must be chosen carefully to only be responsive to the drive frequency and not the source mixing frequency (nano pulse or Tesla coil operating frequency). The point I am making is to not use any old core but be aware of its designed response curve.

Hi starcruiser. I tested a while back, and the Russian ferrite TV yoke core that I have gave its best performance
in the frequency range of about 15 kHz to 30 Khz or so. That type of ferrite does seem to be designed for use
right in that particular frequency range.