Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11803933 times)

nelsonrochaa · « **Reply #11910 on:** February 03, 2016, 04:13:13 AM »

Quote from: Dog-One on February 03, 2016, 01:16:13 AM

The photo above is from Sergey. He is using the same current sense transformer I am using. So I'm not convinced. These are accurate and reliable sensors and I'm pretty confident it is measuring the current actually passing through the wire, surely within 100 amps. The homemade wound toroid sensor Ruslan used I would be suspicious of.

Anyway my point is: If we cannot get this basic waveform signal, I think we're dead-in-the-water making any further progress.

Is not the type of transformer that create that wave , but the way that we connect them 😯

Dog-One · « **Reply #11911 on:** February 03, 2016, 06:07:34 AM »

Quote from: nelsonrochaa on February 03, 2016, 04:13:13 AM

Is not the type of transformer that create that wave , but the way that we connect them 😯

Huge and upside down, but that's what I'm talking about right there.

So what you're saying is the core doesn't matter--that's excellent news.

Then I'm guessing it's how we apply impedance to the transformer that
allows us to see that wish-bone waveform.

Nelson, can you give us a little hint as to which side (primary or secondary)
to apply some investigation?

Jeg · « **Reply #11912 on:** February 03, 2016, 08:01:45 AM »

Quote from: Dog-One on February 03, 2016, 01:16:13 AM

The photo above is from Sergey. He is using the same current sense transformer I am using. So I'm not convinced.

Pretty sure that is a matter of saturation and permeability. I take out this mustache like waveform with a small
10000 μi toroid.

Thanks Void. So I ll take out amplifier's cover to make access to its output transistors, so to watch their temperature. I thought that calculating impedance was only a matter of primary's specs. I had forgot this reflection situation.

TinselKoala · « **Reply #11913 on:** February 03, 2016, 08:33:49 AM »

Facepalm.

T-1000 · « **Reply #11914 on:** February 03, 2016, 10:29:18 AM »

Quote from: Void on February 02, 2016, 08:13:23 PM

T-1000, would you be willing to answer a few questions I have on this experiment that you participated in using the TV yoke,
if I post my own experiment results back here? I believe I currently already have all the necessary components and measurement
equipment I will need to try to replicate what Wesley reviews in his recent video. I have suitable signal generators as well as a 100 MHz
oscilloscope which is capable of also acting as a basic spectrum analyzer as well. In conducting some related experiments a while
back, I did notice that one problem I will have to work around is that local AM broadcast radio stations in the Medium Wave band
(about 530 kHz to 1.7 MHz) can show up as blips on my spectrum analyzer when monitoring a coil of wire on a ferrite core. Hopefully the
magic frequency of my ferrite TV yoke core and windings won't be right close to a frequency of a strong local AM broadcast station.

By the way, in Wesley's recent video he states that the Russian ferrite yoke core they used had the markings: OC-90.38nu12
One of my (Russian) TV ferrite yoke cores has the markings: OC-90.29nu10, although I have no idea what those markings indicate.
Anyone know what those markings indicate?

My ferrite yoke core has the following dimensions:
Wide opening outside diameter: about 105 mm, or 4.3 inches
Narrow opening outside diameter: about 65 mm, or 2.5 inches

All the best...

There was key materials in yoke composition what was reacting to EM radio frequency radiation exposure. The few common between yoke and http://www.rexresearch.com/colman/colman.htm was Cobalt and Barium.
If you would like to understand what we done with NMR, I suggest studying on MRI scans used in materials identification - http://hyperphysics.phy-astr.gsu.edu/hbase/nuclear/mri.html
Just we did expose material on higher energy level on resonant approach (which made energy consumption levels watts, not kilowatts) and this is what made things happen. This is also fundamental method what akula was talking about in his different devices. In one case it is core, in another case it is wire itself.
If you will pursue that on the yoke, have it in radiation isolating container. It will emit beta/gama radiation if you will manage to replicate effect.

nelsonrochaa · « **Reply #11915 on:** February 03, 2016, 10:46:12 AM »

Quote from: TinselKoala on February 03, 2016, 08:33:49 AM

Facepalm.

Thanks by the resize 😁

Hoppy · « **Reply #11916 on:** February 03, 2016, 10:46:52 AM »

Bedini knew and stressed the importance of Barium ferrites but never revealed details other than they are difficult to source today. I believe that the Lithuania type experiment is probably the best road to follow but not for the faint hearted as there are clearly dangers as Wesley has emphasised. Tariel may have accidentally succeeded in the transmutation of energy, whereas I feel that both Akula and Ruslan are still searching.

baudirenergie · « **Reply #11917 on:** February 03, 2016, 01:30:34 PM »

Quote from: T-1000 on February 03, 2016, 10:29:18 AM

There was key materials in yoke composition what was reacting to EM radio frequency radiation exposure. The few common between yoke and http://www.rexresearch.com/colman/colman.htm was Cobalt and Barium.
If you would like to understand what we done with NMR, I suggest studying on MRI scans used in materials identification - http://hyperphysics.phy-astr.gsu.edu/hbase/nuclear/mri.html
Just we did expose material on higher energy level on resonant approach (which made energy consumption levels watts, not kilowatts) and this is what made things happen. This is also fundamental method what akula was talking about in his different devices. In one case it is core, in another case it is wire itself.
If you will pursue that on the yoke, have it in radiation isolating container. It will emit beta/gama radiation if you will manage to replicate effect.

Wow! Thank you for this information. Is my understanding correct, that the Peak in Lithuana Experiment (on Spectrum Analyzer in region of 1.4 - 1.7Mhz) exciting the nuclear Spin of barium and Cobalt components in Ferrite Choke. The 50 Hz Carrier wave pick up the additional Energy to pull it out from Ferrite?

ramset · « **Reply #11918 on:** February 03, 2016, 01:49:58 PM »

Trying to help move thru this Monster over sized page [Nelson ?? Resiize school starts again next month ]

@ Hoppy
Can you reference any Links for this Comment on Be*ini and Barium ?

thanks

* Forum note the above space is in Memory of 93 Atomix
word on the street is he was retired from the game [control issues]
Its a Ruff game ...
Plus the space will help get to the next page and easier reading [NELSON ?? ReSize school ??...Tinsel does offer a Resize class But I am not sure about that ??[maybe PM him ??...

thx
Chet

Hoppy · « **Reply #11919 on:** February 03, 2016, 02:03:35 PM »

Hi Chet,

I have nothing saved but if you google his name and add barium ferrite, a few links will come up.

ramset · « **Reply #11920 on:** February 03, 2016, 02:14:28 PM »

well
we are completely equipped here to tickle all of that stuff at appropriate frequency's or every other combination...
Maybe a discussion around that ??
where to source [minuscule amounts for testing [we do have access possibilities ?

another of moment of space for 93

in memory and purpose !!

fair the well Treks and 93...

hope when you get done with Charm school they teach you some manners too

that should put us to the next page...
Chet

no a smidge more...

A worthy tribute in deed
poors a bit on the ground for Homey .....

this is nuts

Bye

nelsonrochaa · « **Reply #11921 on:** February 03, 2016, 02:21:37 PM »

Quote from: Dog-One on February 03, 2016, 06:07:34 AM

Huge and upside down, but that's what I'm talking about right there.

So what you're saying is the core doesn't matter--that's excellent news.

Then I'm guessing it's how we apply impedance to the transformer that
allows us to see that wish-bone waveform.

Nelson, can you give us a little hint as to which side (primary or secondary)
to apply some investigation?

Look, this waveform can be achieved by placing a bifilar coil in series with the output of the secondary of the transformer, but only create this form if the correct note is played

So the choice of material of core should be based in the note that you play .
Definitely this is not helped anyone without the correct understanding of the functioning of these types of systems.
People become blind in search of something they do not understand, they want a circuit that generates energy and this not possible, because the energy already exists and can only be pumped or converted from one state to another!

Self Runner circuit is another story! It is a state of art reach this condition!
To create a loop "pump" self runner is necessary to understand where it appears the "juice" surplus, that feeds the circuit enabling maintaining oscillations of each cycle.

As you can see there are several stages involved and without understanding one another will make no sense!
But I'm not selling anything, moreover there is a lot of informed people who participate in this forum

We certainly disagreed with my opinion.

So good luck

Hoppy · « **Reply #11922 on:** February 03, 2016, 02:23:00 PM »

Quote from: ramset on February 03, 2016, 02:14:28 PM

well
we are completely equipped here to tickle all of that stuff at appropriate frequency's or every other combination...
Maybe a discussion around that ??
where to source [minuscule amounts for testing [we do have access possibilities ?

another of moment of space for 93

in memory and purpose !!

fair the well Treks and 93...

hope when you get done with Charm school they teach you some manners too

that should put us to the next page...
Chet

no a smidge more...

A worthy tribute in deed
poors a bit on the ground for Homey .....

Nearly there Chet!

One possible source I read about way back was that barium ferrite was widely used back in the 50's, 60's as medium / long wave aeriel rods and for magnets in loudspeakers.

nelsonrochaa · « **Reply #11923 on:** February 03, 2016, 02:24:05 PM »

Sorry about image resize . Just solved !

ramset · « **Reply #11924 on:** February 03, 2016, 02:37:12 PM »

Hoppy
quote
Bedini knew and stressed the importance of Barium ferrites but never revealed details
snip ,
One possible source I read about way back was that barium ferrite was widely used back in the 50's, 60's as medium / long wave aeriel rods and for magnets in loudspeakers
end quote

Sound systems HUH ?? the lineage of the TPU was speakers !

Steven Marks }TPU} made a discovery playing with speakers ... which lead to the TPU

Needs serious looking into, source, Home remedy [options for home assembly ??] then a simple test bed and experiment ..
I could take this itty bitty experiment down to Wesley for some " itty bitty test runs" ..

No stone left unturned...

@Nelson
Thank you

Chet

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11803933 times)

nelsonrochaa

Re: Kapanadze Cousin - DALLY FREE ENERGY

Dog-One

Re: Kapanadze Cousin - DALLY FREE ENERGY

Jeg

Re: Kapanadze Cousin - DALLY FREE ENERGY

TinselKoala

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

nelsonrochaa

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

baudirenergie

Re: Kapanadze Cousin - DALLY FREE ENERGY

ramset

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

ramset

Re: Kapanadze Cousin - DALLY FREE ENERGY

nelsonrochaa

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

nelsonrochaa

Re: Kapanadze Cousin - DALLY FREE ENERGY

ramset

Re: Kapanadze Cousin - DALLY FREE ENERGY