Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715910 times)

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11895 on: February 02, 2016, 08:57:27 PM »
Hi Void
Is it possible to attach this basic circuit of acula? There is such a mess with all his circuits!

Sure Jeg, no problem.
This is just a screenshot taken from Akula's video (actually it was taken from Wesley's video on Akula's video).
I think Akula left out at least one or more other important details, but this is supposed to be the general core principle underlying
all his devices. 
I don't think Akula's explanation of his circuits acting like a magnatron is really right, at least it doesn't seem to make sense, although
Akula may be right that there could be some similarities.

P.S. Akula stated that you would use either a permanent or electromagnet applied to the bifilar winding, or use another
AC source as shown as the extra winding on the right hand side of the bifilar winding. Wesley translates much of this in his video here:
http://www.youtube.com/watch?v=ghRDcgrMwp0
If you watch this video by Wesley, Akula's diagram should make more sense...

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11896 on: February 02, 2016, 09:00:09 PM »
What about the 4 Ohm output of the amplifier?

Hi Jeg. Most audio power amplifiers are designed to drive a low impedance of around 8 or 4 ohms.
The short primary winding on the ferrite yoke core should also be quite low impedance I would
think, so it shouldn't be too much of an impedance mismatch for an audio power amplifier I would guess.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11897 on: February 02, 2016, 09:08:05 PM »
Sure Jeg, no problem.
This is just a screenshot taken from Akula's video.
I think Akula left out at least one or more other important details, but htis is supposed to be the general core principle underlying
all his devices. 
I don't think Akula's explanation of his circuits acting like a magnatron is really right, at least it doesn;t seem to make sense, although
Akula may be right that there could be some similarities.

The coil on the right gives the low frequency power signal. Left coil seems to give the Hf signal. The middle one is the output coil. Same as Ruslan and Dally. Thanks

About the primaries of the yoke, normally is pretty less than 0.5 ohm. Is there any way to increase it without using resistances?

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11898 on: February 02, 2016, 09:13:43 PM »
The coil on the right gives the low frequency power signal. Left coil gives the Hf signal. The middle one is the output coil. Same as Ruslan and Dally. Thanks

About the primaries of the yoke, normally is pretty less than 0.5 ohm. Is there any way to increase it without using resistances?

Hi Jeg, see the P.S. note I just added to my reply on Akula's circuit diagram.

I guess you mean 0.5 ohm DC resistance? The AC impedance of the primary winding at about 15 to 20 kHz should
be higher than 0.5 ohms, I would think.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11899 on: February 02, 2016, 09:26:07 PM »
Hi Jeg, see the P.S. note I just added to my reply on Akula's circuit diagram.

I guess you mean 0.5 ohm DC resistance? The AC impedance of the primary winding at about 15 to 20 kHz should
be higher than 0.5 ohms, I would think.

I hope you are right as I have a nice power amplifier. I will calculate the impedance of my primaries to check it. Thanks :)

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11900 on: February 02, 2016, 09:44:48 PM »
I hope you are right as I have a nice power amplifier. I will calculate the impedance of my primaries to check it. Thanks :)

Hi Jeg. The input impedance of the primary winding on the ferrite yoke core won't exactly be the
inductive reactance of the primary winding alone at around 15 or 20 kHz. The yoke core itself will
transform the impedance of the secondary winding and the associated circuitry it is connected to back
to the primary winding when the circuit is all connected together and operating. When you have the circuit all connected together,
you may need to experiment a bit with the number of windings on the primary winding to give the best performance,
and which causes the least amount of heating on the output transistors of the audio power amplifier at a given
power level.  I would suggest running the power amplifier at lower power levels first and making some adjustments to
the primary windings to try to tune things up better, before turning up to higher power levels.  Keeping a close eye on how hot
the final power transistors are getting on the power amplifier when testing with it is probably not a bad idea... :)


John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11901 on: February 02, 2016, 09:48:00 PM »
    Verpies:
   Well, I haven't seen my yoke generating or "producing"anything other than what it gets just from input signal. No additional power coming into it from the ambient observed, as yet. Nor a reduction of the input power, at any point. Which is what I've been looking for.  If that's what you were asking.

   A signal generator's amplitude, and current levels can be amplified similar to what the push-pull circuit can produce?
That's interesting, and I'd like to see that.
  How or why is that any different from what the TL494 boards are already doing, when controlling the frequency and duty cycle?

  Forest:  That's no yoke...

   John K1: You want to tell them what they may have missed, before the deletion?  I can't.  As it was removed it, for a reason.

 

What the F... I deleted the post because my fingers were faster than my brain :)  Anyway - Why Ruslan deleted his videos?  There might be more reasons why .  In one of his last videos he complains about the comments and how he is sick to read them (actually he didn't read them) - in other word - he got pissed off, He also was saying something there is some people who doesn't like it and that is why he is not gonna show it all ( it just sound like he was threatened - just a my personal feeling and conspiracy  :)

Romanov said he tunes the device to the frequency of earth in given territory. He showed how to make such resonator and there is also other guy who shows the same think with two coils and magnet and transistor. I got today coils (relays) from Russia- the same ones like in the movie and now working on it. And may be I will implement it in to the Ruslan's device.  Than I will be tuned to the local ground :)
   

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11902 on: February 02, 2016, 10:00:53 PM »
Romanov said he tunes the device to the frequency of earth in given territory. He showed how to make such resonator and there is also other guy who shows the same think with two coils and magnet and transistor. I got today coils (relays) from Russia- the same ones like in the movie and now working on it. And may be I will implement it in to the Ruslan's device.  Than I will be tuned to the local ground :)

Hi John.k1. That's another avenue to pursue in regards to trying to unlock the 'secret'
of these devices. One thing to consider is that Akula showed in his second high power self runner
video that he could disconnect the earth ground wire and it continued to self run, although with less
output power. To me, that seems to indicate that what creates the over unity effect is not the connection
to earth ground itself, but an earth ground connection seems to boost output power a fair bit. Also Akula's
low power devices do not seem to use any earth ground connection, if you allow for the possibility that his low
power devices are not fakes. This is leading me personally to look for the core part that causes the actual
over unity effect, but your approach on trying to tune for a suitable earth ground frequency might prove very
interesting as well... Between the two different approaches we may come up with something useful... :D

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11903 on: February 02, 2016, 10:04:10 PM »
  Forest:  That's no yoke...

HI Nick. Yes, there is no no question in my mind that ferrites can be a real yoke... :)

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11904 on: February 02, 2016, 10:42:16 PM »
Hi John.k1. That's another avenue to pursue in regards to trying to unlock the 'secret'
of these devices. One thing to consider is that Akula showed in his second high power self runner
video that he could disconnect the earth ground wire and it continued to self run, although with less
output power. To me, that seems to indicate that what creates the over unity effect is not the connection
to earth ground itself, but an earth ground connection seems to boost output power a fair bit. Also Akula's
low power devices do not seem to use any earth ground connection, if you allow for the possibility that his low
power devices are not fakes. This is leading me personally to look for the core part that causes the actual
over unity effect, but your approach on trying to tune for a suitable earth ground frequency might prove very
interesting as well... Between the two different approaches we may come up with something useful... :D

Hi Void,  Don't forget Akulas's device stopped working in Germany. Also something to consider what Romanov shows again in his movie I posted earlier  - Magnetic field of earth is more complex. Romanov actually compare it with the sun, where you can see the eruptions. Something similar is on the earth.  It is not just only north and south pole between which are flux, bu there is several (or a lot of) some small local ones too. Which reminds me I was actually watching some document about the same short time ago.  I just want to say you might be lucky and be in energized place or you you have just bad luck :) Remember document about Don Smith, with some Geo whatever Map on his table?

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11905 on: February 02, 2016, 11:04:26 PM »
Hi Void,  Don't forget Akulas's device stopped working in Germany. Also something to consider what Romanov shows again in his movie I posted earlier  - Magnetic field of earth is more complex. Romanov actually compare it with the sun, where you can see the eruptions. Something similar is on the earth.  It is not just only north and south pole between which are flux, bu there is several (or a lot of) some small local ones too. Which reminds me I was actually watching some document about the same short time ago.  I just want to say you might be lucky and be in energized place or you you have just bad luck :) Remember document about Don Smith, with some Geo whatever Map on his table?

Hi John.k1. How was it confirmed that Akula can't get one of his high power devices working in Germany?
Could that possibly be only a rumour?  That may the case however, for all I know.

I have to emphasize again that Akula has showed various lower power devices self-running without any apparent
direct earth ground connection, and Akula showed that his second high power self runner could self run without
an earth ground connection. If we allow that these Akula devices might not be fakes, then I don't think this point about
earth ground connections can be overlooked. I have no idea what Akula's devices may be tapping into, and it appears to
me from watching all of Akula's latest videos that Akula himself probably still does not know what these devices are really
tapping into, even though Akula has offered up a few theories in the last couple of years about this. So far, Akula's 'theories'
on what he thinks makes it work seem to change with the wind, and also seem to be questionable at best.   :)

Good luck with your experiments. I will report back here if I find any interesting or magic frequencies in my own experiments...
I am not convinced at all that this 'magic frequency' is related to the ferrite material itself, as it seems to me it could possibly relate to
something else entirely which we just don't know about yet, but I think a good starting point will be trying to replicate the results
reported by Wesley and T-1000 regarding the Lithuania experiment # 2, using a similar ferrite yoke core. From there, if I see any
interesting results, other experiments can be done to try to understand it further... From what Wesley described in his summary video,
it shouldn't be too hard at all to set this up and runs some tests... :)

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11906 on: February 03, 2016, 12:20:48 AM »
Between the yoke and induction heater coil there is a series capacitor.  In this circuit, measuring amperage with a current sense transformer, has  anyone been able to get the wish-bone wave form as shown in the scope shot below (yellow trace)?

I have tried driving with an audio amplifier and can only get a normal sine wave, so I know this will never work and have abandoned any further testing using an audio amp.  Currently with my push-pull and using a nanocrystaline toroid core I'm still getting a normal sine wave.  My hunch is one needs to sequentially remove one turn on each primary until this wish-bone pattern shows up.  If it's not possible to achieve this waveform with a nanocrystaline core, then I think a ferrite core is mandatory.  Whether or not a ferrite core can handle this abusive drive for any sustained amount of time is still up-in-the-air.

I think part of the trick is placing the yoke into full or partial saturation.  Maybe verpies can weigh-in on this.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11907 on: February 03, 2016, 12:35:46 AM »
Between the yoke and induction heater coil there is a series capacitor.  In this circuit, measuring amperage with a current sense transformer, has  anyone been able to get the wish-bone wave form as shown in the scope shot below (yellow trace)?
I have tried driving with an audio amplifier and can only get a normal sine wave, so I know this will never work and have abandoned any further testing using an audio amp.  Currently with my push-pull and using a nanocrystaline toroid core I'm still getting a normal sine wave.  My hunch is one needs to sequentially remove one turn on each primary until this wish-bone pattern shows up.  If it's not possible to achieve this waveform with a nanocrystaline core, then I think a ferrite core is mandatory.  Whether or not a ferrite core can handle this abusive drive for any sustained amount of time is still up-in-the-air.
I think part of the trick is placing the yoke into full or partial saturation.  Maybe verpies can weigh-in on this.

Hi Dog-One. I think Itsu did some similar tests to try to get that same sort of current waveform in the
high current loop on the secondary side of the yoke, and I think what was determined as causing that
funny shaped waveform for the current waveform, is that the small toroid used as the current transformer
which is used to measure the current in the high current secondary loop is going into saturation. Because the
small current transformer is going into saturation, it makes the current waveform look like that... At least that is
what the explanation was at the time, from what I recall... Seems to make sense.




Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11908 on: February 03, 2016, 01:16:13 AM »
... is that the small toroid used as the current transformer
which is used to measure the current in the high current secondary loop is going into saturation. Because the
small current transformer is going into saturation, it makes the current waveform look like that...

The photo above is from Sergey.  He is using the same current sense transformer I am using.  So I'm not convinced.  These are accurate and reliable sensors and I'm pretty confident it is measuring the current actually passing through the wire, surely within 100 amps.  The homemade wound toroid sensor Ruslan used I would be suspicious of.

Anyway my point is:  If we cannot get this basic waveform signal, I think we're dead-in-the-water making any further progress.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11909 on: February 03, 2016, 01:36:14 AM »
Dog-One, I don't know for sure one way or the other, but maybe Sergey has a lot higher
current in his secondary loop than you? Possible factors which may make a difference are peak driving voltage to
the primary, or not being right on the resonance frequency of the total secondary LC, or having different winding
impedances,  or having a different secondary series capacitor value. All would impact secondary current amplitude.
Unless you guys are using the exact same toroids and winding counts and series capacitor value, etc., it seems to
me you could easily be seeing fairly different secondary loop current amplitudes.