Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719629 times)

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11760 on: January 27, 2016, 07:29:35 AM »
   Dog One:
   The 17, 27, 37 refers  to the running frequency in kHz, of the 3 turns coil, as read at the tuning capacitor using a scope. 
   17kHz, 27kHz, 37kHz.
   Those were the same frequencies as what Akula's diagram suggested to be the right resonant peaks to tune to.

So if I run at 22kHz, it will never work.  Any idea why?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11761 on: January 27, 2016, 07:43:51 AM »
So if I run at 22kHz, it will never work.  Any idea why?

Of course it will work at any frequency.
It is just that you tune easier to those frequencies with the ready capacitor values of 1uF and its multiples.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11762 on: January 27, 2016, 07:49:57 AM »
    Dog:
   Each different version of the Akula/Ruslan devices that has been shown on the videos, has run at a different frequency.
For both the induction circuit, as well as the matched and syncronized Kacher frequency.
    So, one could think that there does not seam to be a natural Earth frequency or one of it harmonics, to tune to. But instead, that the particular device will create those resonant points, several resonant points, not just one, as the frequency is varied, or controlled.
    Those three frequencies may have been what a spectrum analyzer would detect as the three best highest peaks.
    Your device may have a whole different set of resonant points. So, it doesn't mean that yours won't resonate best at 22kHz. 
But, then the Kacher has to sync with that 22kHz, at something like 2.2mHz, or so. Whether you find the needed syncronization at that frequency, or not, is what you may have to see for yourself.
   This is what we're all still trying to hash out. Where the magic frequencies for proper resonance lies...

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11763 on: January 27, 2016, 08:17:23 AM »
Guys, with respect to the video I posted yesterday, the frequency change with the load. It has been shown in his video. He says - important is to hold RESONANCE (not frequency- ( f  changes) )  and have synchronization with PULSES on Tesla.   Pulses fires at CURRENT peaks of inductor.  That's all the magic.

Here is the second (continues) video 

https://www.dropbox.com/s/rr9oeje9kfl5t3l/%D0%9A%D0%B0%D0%BA%20%D1%8D%D1%82%D0%BE%20%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82%202.mp4?dl=0

He did some corrections to the drawing. He also shows a relay going to Tesla generator ( why relay?)  Once again, in this movie he speak about keeping a resonance (not frequency)  on the inductor.  I think he says the resonance frequency is automatically tuned by generator on push-pull and it was going as high as 35KHz.

He draw a capacitor on grenade, and he says it creates the resonance on the grenade and if in phase with inductor it will generate less heat.

Also he says- FORGET ABOUT KACHER!!! 


Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11764 on: January 27, 2016, 08:30:50 AM »
   This is what we're all still trying to hash out. Where the magic frequencies for proper resonance lies...

So here's what I'm doing...

I run the inductor from the three turn high current output of the yoke, pick a cap to use between the three turns and the inductor and tune the frequency until I hit or find all the resonant points.  With a current sense transformer on this connection, I look for that wishbone wave form.  I also look at the current and voltage coming out of the grenade.  This is so tediously slow, constantly changing caps and so far I just don't see any particular wave form of interest.  It's like any cap could or should work.  That's what got me thinking about the 17-27-37.  I'm wondering if the grenade is suppose to react at all of those frequencies with some sort of parametric harmonic.  Or maybe with a spectral analyzer I should see peaks at those frequencies and if I don't, then the grenade is no good and needs to be rewound.  Just makes me think if you have exactly 37.5 meters of wire on the grenade and it's wound properly, those harmonics should show up when the inductor is excited.  Just don't know.  Seems like there is no point in even turning on the kacher if you don't see what you are suppose to see from the push-pull and grenade.  There must be a method to the madness...

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11765 on: January 27, 2016, 09:41:24 AM »
.  Just makes me think if you have exactly 37.5 meters of wire on the grenade

48-48 24-24 and 12-12 on 5cm diam. tube gives a length of wire of 33.5m. If it is in series with the 4m of 28T wire at the yoke then you have 37.5m
If your grenade is connected with a parallel cap or with the diode bridge right at its ends, then the effective length is 33.5m This is the most critical measurement for me if it is to tune to a harmonic.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11766 on: January 27, 2016, 09:44:38 AM »
Here is the second (continues) video 


Also he says- FORGET ABOUT KACHER!!!

Sorry John but appears that there is an error on the posted link. The same with video No.1

Forget Katcher, only if you have found other ways for producing HV HF ;)

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11767 on: January 27, 2016, 10:22:21 AM »
Hi Jeg.

The link again: https://dl.dropboxusercontent.com/u/61581587/%D0%9A%D0%B0%D0%BA%20%D1%8D%D1%82%D0%BE%20%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82%202.mp4

No Kacher- just some generator generating pulses (possibly the train of pulses?)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11768 on: January 27, 2016, 10:28:58 AM »
Thanks John. Perhaps problem is mine

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11769 on: January 27, 2016, 10:48:17 AM »
Wierd, I think man in black is after me :D

Try to download later.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11770 on: January 27, 2016, 11:06:46 AM »
I see in this Saeed schematic, reference to 17-27-37 again.

Anyone have a clue what that means?
There is quite recent video from Romanov (Russian) about the basic concepts - https://www.youtube.com/watch?v=9M9Mu0k0gSs
Please see circuit in the video and the ground relation part there. This is charge difference being created in same way as between Tesla coil and Grenade coil.
Also in my comment there (also Russian) I suggested to user parallel resonance first so the power requirements will be minimal then use series resonance for max current and attach bucking coil/D. Smith transformer for load isolation from the resonant circuit then do Tesla coil parallel resonance for creating static charge difference between circuit and the ground so it can be used to power loads after amplification of effect.
Also all these components can be found in Kapanadze/Dally/akula/Ruslan devices if you look on them from standpoint of mixing different types of resonances. Basically you create electrostatic pump with minimal required power then amplify pumping effect with added current between circuit and the ground. It is secondary electrostatic charge pumping process initiated by the primary process used to create pump so the power is there but not directly related to the primary power source.
Cheers!

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11771 on: January 27, 2016, 11:43:43 AM »
Very good points here. Current resonance. I feel that the grenade is a full wave antenna with secondary not much disturbing primary. Those two and you are in business.

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11772 on: January 27, 2016, 03:10:50 PM »
Hi.
magpwr
I like your idea as you figure how to put together a schematic please share the values of resistors and the rest of the elements I would be happy to try to solder it together

LM393 merely amplify signal from current sensor toroid and convert it to logic.
CD4017 -Divide by 10 .This i/c is likely configured/connected as divide by 2 instead.
IR2111 merely split the signal in this circuit of Akula.
IR2113 is the IGBT or Mosfet driver.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11773 on: January 27, 2016, 03:42:47 PM »
Hi.
magpwr
I like your idea as you figure how to put together a schematic please share the values of resistors and the rest of the elements I would be happy to try to solder it together

LM393 merely amplify signal from current sensor toroid and convert it to logic.
CD4017 -Divide by 10 .This i/c is likely configured/connected as divide by 2 instead.
IR2111 merely split the signal in this circuit of Akula.
IR2113 is the IGBT or Mosfet driver.

hi Tomtech29,

I have assembled a even more simple circuit today on breadboard using only 2 i/c instead of 4 to achieve the same thing which produce 1/2 the input frequency base on test.37khz in and produce 18.49999khz pwm output.

UC3825 apart from usual (+) (-) inputs and  the usual1.5Amps rated dual pwm output compared to lousy TL494 250mA output,6x better.
The pin 5 of UC3825 connected to pin 16.Pin 6&7 is connected together and this become the clock/signal input.
All the other pin is untouched.But i did implement soft start(3s delay start after power on) by placing 10uf capacitor at pin 8."Optional just to prevent sudden rush of current by protecting mosfet or igbt ,1.2kv rated."

My only LM393 was damaged so i am using a TLC272 which eventually needs to be connected to the toroid,so called current sensor toroid.
The input stage it's still a work in progress. :)

That's all for today.Got to rest. 8)

I do own a usb spectrum analyzer it really does produce sub-harmonics in khz  if i apply sweep frequency from 1.65Mhz to 1.8Mhz on the kapanadze winding.

This was the important test i need to do before even deciding to commence on the above experiment. :)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11774 on: January 27, 2016, 03:50:01 PM »
  John K1:
  Neither of your video links worked for me. This second one said that I need to install Flash, to view the video.
Which I won't do.