Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718113 times)

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11745 on: January 26, 2016, 02:45:30 AM »
One 74HC123 chip will give you adjustable pulse widths down to 0.01% duty cycle, but not directly adjustable duty cycle (independently of the frequency).

I don't recommend that chip for this project though.  Use a non-retriggerable SN74LS221 instead.  This is also a dual device chip so you can perform phase delay and pulse with controlled width in just the one chip.  Basically two one-shot devices in a single package.

This is what you want to precisely control the pulse width instead of fussing with duty cycle that will change as you adjust frequency.  Now if you implement the phase delay, this delay will be constant so the phase angle will move with changes in frequency, so keep that in mind.

Back a while ago I implemented a Cypress PSoC 5LP controller to track frequency with controlled pulse width and locked phase delay.  This made it super simple to create a pulse of a specific width that would hold a constant phase angle regardless of frequency input.  It did what I wanted, but I didn't see the effect we are after.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11746 on: January 26, 2016, 02:57:06 AM »
I don't recommend that chip for this project though.  Use a non-retriggerable SN74LS221 instead. 
The 123 is capable of edge triggered operation without level retriggerability.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11747 on: January 26, 2016, 10:58:59 AM »
Hi Itsu.

I actually have similar idea as Nick.  I want to try to pulse Flyback connected to tesla coil. Flyback has frequency in KHz as the current LC loop. And will excite the Tesla coil which has MHz . Theoretically (but probably not) I might see train of pulses? May be Flyback can get damaged ? May be I should take care about the impedance and all will be fine?  I am in the process of reworking of complete coil. Making it much bigger (bigger diameters of wires) also Tesla is now from 0.7 mm heavily insulated wire. (120 turns) Tomorrow I start print the holding structure a before the weekend I might be back to experiment.



That low duty cycle is probably related to unipolars.    Does anybody know how to reduce duty cycle "externally" ? :)  I have SG with only 1% step. I need to be able to tune by 0.1% and not to buy new SG.  :)

Dog-Dog - How is it with the Push-Pull. Did we made a deal or not?  Not sure now.

Starcruiser - Yes I was thinking about it too, but as I said I fail to get any effect out of it. It can change with my new build.  I still keep it in my mind ;)

Hi John,

not sure what you mean by flyback in this setup, but if you mean that you want to pulse the kacher driver, thats what is in the latest Ruslan (Oleg) setup.

It uses a push pull frequency (KHz) synced (very narrow) pulse to drive the kacher.
The result is what i show in the screenshot here:

http://overunity.com/12736/kapanadze-cousin-dally-free-energy/msg463952/#msg463952

Blue is the very narow pulse driving the kacher
purple is the output of the kacher as result of this very narrow pulse
yellow / green are voltage and current on/in the inductor coil

Itsu

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11748 on: January 26, 2016, 12:07:33 PM »
Hi Itsu, guys.

Not sure how could I miss this movie -even when  it is in my folder for ages.  I consider that  movie very valuable.  I guess most of you has seen it, no harm to discuss what he says there. I am at work right now, have no time to make comments.
Ruslan  made lots of "valuable" points in there. I'll be back later on ;) Just start with the schematic- Ruslan says it is absolutely right.

https://dl.dropboxusercontent.com/u/61581587/%D0%9A%D0%B0%D0%BA%20%D1%8D%D1%82%D0%BE%20%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82%20%21.mp4

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11749 on: January 26, 2016, 02:34:11 PM »
Hi Itsu, guys.

Not sure how could I miss this movie -even when  it is in my folder for ages.  I consider that  movie very valuable.  I guess most of you has seen it, no harm to discuss what he says there. I am at work right now, have no time to make comments.
Ruslan  made lots of "valuable" points in there. I'll be back later on ;) Just start with the schematic- Ruslan says it is absolutely right.

https://dl.dropboxusercontent.com/u/61581587/%D0%9A%D0%B0%D0%BA%20%D1%8D%D1%82%D0%BE%20%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82%20%21.mp4

That is a helpful video--guess I hadn't seen it before.

So the nice sine wave is taken across the series capacitor that tunes the inductor.  Then the funny shaped current signal is used to find the exact point where we pulse the tesla primary or coax in the other version.  Interesting...   I don't get the funny shaped current signal in my setup.  I get a nice sine wave on the current side.  Wonder what that is all about...

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11750 on: January 26, 2016, 02:50:51 PM »
Hi Dog- This video it is like a complete information how to do it- in theory- no schematics.

Very important- synchro electronics has to keep resonance what ever happens. (it change with bulbs)

2-5 KV is perfect voltage on anntena- no need more. On antenna has to be uni polar pulses , the ferite rod cleans them from the rubbish. Kacher strongly not recommended.

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11751 on: January 26, 2016, 02:55:26 PM »
Hi Itsu, guys.

Not sure how could I miss this movie -even when  it is in my folder for ages.  I consider that  movie very valuable.  I guess most of you has seen it, no harm to discuss what he says there. I am at work right now, have no time to make comments.
Ruslan  made lots of "valuable" points in there. I'll be back later on ;) Just start with the schematic- Ruslan says it is absolutely right.

https://dl.dropboxusercontent.com/u/61581587/%D0%9A%D0%B0%D0%BA%20%D1%8D%D1%82%D0%BE%20%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%B0%D0%B5%D1%82%20%21.mp4
Hi.
This is an interesting trick you find that. I still insisted on the synchronization current push pull
 for the present moment, no one showed how to operate the PLL if not Itsu.-I regret that failed lack of positive effect.
I still think that to a large extent, it depends on maintaining resonance in the tank! and the next step is to put spikes on top of the current,so bifilar coil with ferrite rod is to suppress ringing off impulse
 on a Tesla coil served with a semiconductor one half sine!
as I understand it the problem is that I do not know how to control the current in the tank to not waned?
Somebody tell me to stop because I'm repeating myself, and there is no reason to think so...
 But this system is so twisted that in other versions like no PLL This is damn frustrating?
what is your opinion on this topic?

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11752 on: January 26, 2016, 02:59:13 PM »
Very important- synchro electronics has to keep resonance what ever happens. (it change with bulbs)

If I can figure out how to get the same current sense waveform he is getting, then doing a PLL lock on the resonant frequency is easy.

Next, all we need is a trigger source--using the positive peak of the current sense is perfect.  Then we delay if needed and create a pulse of specific width to properly drive the tesla primary.  After that we take the tesla secondary signal and tune the bucking coil ferrite rod to only pass a unipolar pulse to the antenna.

Sounds easy enough to me.  Lets get to it and see what happens...

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11753 on: January 26, 2016, 03:38:05 PM »
"If I can figure out how to get the same current sense waveform he is getting, then doing a PLL lock on the resonant frequency is easy."
I have no idea how it works PLL but as I tried to manually tune the resonance peak a further additional bulb I not crossed the threshold of 300 Watt why?
how I am I to understand that performs automatic frequency control if he also controls the phase shift of separately from each port It will have an impact on the flowing current to the coil?
I would have asked for demonstrations as possible!
Thanks :D

x_name41

  • Sr. Member
  • ****
  • Posts: 254
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11754 on: January 26, 2016, 03:54:45 PM »
this archive contains schematics, video and detailed description for successful replication of the Ruslan Kulabuhov generator

for more info see http://realstrannik.com/forum/freeenergylt-antanas/708-povtorenie-ustanovki-free-energi-kolobukhova#38500

ooops, sorry but I saw that the material already has been released

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11755 on: January 26, 2016, 05:09:56 PM »
Кулабухов не врал    (Kulabuhov not lie)

https://www.youtube.com/watch?v=LyHJN_ztOsw

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11756 on: January 26, 2016, 10:00:16 PM »
  Oh boy!  He lit a bulb...

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11757 on: January 27, 2016, 03:51:30 AM »
I see in this Saeed schematic, reference to 17-27-37 again.

Anyone have a clue what that means?

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11758 on: January 27, 2016, 04:38:55 AM »
hi everyone,

I was about to assemble a prototype which was already tested on breadboard which is one of a kind PWM generator which works from low voltage all way to high voltage.

This design is 6 times better than the Russian favorite TL494,lowest component count and good for anyone with just soldering iron skill at least.
This circuit is tested to work from 9volts onwards and able to work with low 12volts to high voltage 350volts dc (Full bridge-rectified from pure 12-220v inverter).

But wait a second
--------------------------------------------------

As usual i am hit with sudden in rush of ideas after digging up old archive from Akula . (Distracted in a good way i think) :D

If anyone recall in sergey circuit the kacher portion is operated using interrupter pulse with the additional ability to position the stream of pulse.

The Akula circuit should be generating low frequency "interrupted" pulse" since the transistor already is oscillating at whatever the natural frequency of Tesla coil.1.7Mhz...1.8Mhz.

Kacher circuit of  Sergey is operating near 100volts by looking at the capacitor rated value and Akula is using high voltage anywhere from 100volts...200volts.

-----------------------------------------------------------------------------------------
PWM circuit of Akula and Sergey is completely different.

PWM circuit of Akula is highly likely running at "1/2" the frequency of the detected frequency(Eg:1/2 of 37khz is 18.5khz for pwm).Since we should still remeber that Akula did mention for Air coil it should no go below 17khz in order to maintain a certain level of efficiency.

LM393 merely amplify signal from current sensor toroid and convert it to logic.
CD4017 -Divide by 10 .This i/c is likely configured/connected as divide by 2 instead.
IR2111 merely split the signal in this circuit of Akula.
IR2113 is the IGBT or Mosfet driver.

PWM circuit along yoke of Akula is driven using 24volts.Take note of the operating voltage limit of IR211x which is likely regulated at 15volts  to 18volts.

NTC1 in circuit of Akula is likely a varistor around 100volts to Earth.


This is the most obvious circuit pwm circuit of Akula's which wasn't replicated by anyone to date.

After watching Vasmus video with use of nano-crystalline core merely for efficiency.I am now confident to say it isn't ferrite or Rubin ferrite yoke that produce this OU.
This should be considered good news for the 99% of the replicators. :D :D :D

----------------------------------------------------------------------------------------------
Latest update-The LM393 input might be likely coupled together with some kind of low pass filter to accept sub-harmonics of below 45khz or band pass filter to accept around 17khz....37khz for sub-harmonics.


That is how crazy it is. :D :D :D


That's all.
« Last Edit: January 27, 2016, 06:43:38 AM by magpwr »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11759 on: January 27, 2016, 07:17:28 AM »
   Dog One:
   The 17, 27, 37 refers  to the running frequency in kHz, of the 3 turns coil, as read at the tuning capacitor using a scope. 
   17kHz, 27kHz, 37kHz.
   Those were the same frequencies as what Akula's diagram suggested to be the right resonant peaks to tune to.