Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718705 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11730 on: January 25, 2016, 07:12:48 PM »
@NickZ

I think you're mostly correct, but I must add:  I think the pulse shape/width of the two signals must be correct, as well as the synchronization between them.  It can't just be the frequency or we would have got this working by now.

I'm still not clear how the 1:100 frequency ratio comes into play, but I have a hunch if you get other factors aligned, it will make sense.

   Dog, the earlier Ruslan videos were showing a regular sine wave signal from the Kacher circuit, nothing out of the ordinary.
And the device still would self run.
    I'm trying to replicate THAT effect, if possible.   

   Itsu:  You mentioned that the Kacher can not be controlled by a TL494 circuit, or a PWM. 
Would that still the be case if just using a PWM (simple 555 circuit), onto the Kacher?
  It's interesting what Geo mentioned, that if he raises the duty cycle over 30%, it stops oscillating. 
At least that's how I understand it. 
  Maybe that's why I don't get any interaction, when using 100% duty cycle.  Or not?
  Shortening the duty cycle reshapes the wave form, to produce a higher more pointed peak.  Right?

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11731 on: January 25, 2016, 07:44:50 PM »
  Tomtech:
   That's interesting. But, your bulbs are still not bright, at all, even with the extra coil connected.
   But, maybe you have something there. 
   Were you running those bulbs just from the 3 turns coil's output at the grenade 168t coil?

It is important to keep current in the circuit in series Lc the rest take care of Tesla!
See how he does it,still a long way to reach the 1260 Watt but it must be done.I do not have such a PLL
 I would try to bring about this effect it's possible the right way?
because it interesting that the sources amperage little changed from another bulb!
 Now I wonder what he's doing winding 28 which do not have!



NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11732 on: January 25, 2016, 08:57:39 PM »
  Yet, it looks like the scope is showing a frequency change with every additional bulb that Ruslan is lighting.  But,  he's showing that he can bring it back to his best frequency point, again.  Or is this happening on it's own?  As I can not see what he's doing.

starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11733 on: January 25, 2016, 09:24:39 PM »
Thanks Geo. It looks like we are on the same wave :D   Now the question is how to create that uni-polar pulses. My guess is they are formed on the  ferite rod between the Tesla and antenna. My previous experiment some time back was unfortunately  unsuccessful ;( Any idea?  I can get them easily on the toroid with two coils.
Look a the Ferrite rod, the 2 coils, one is 4 winds and the other 5? they are opposing thus cancel except for one direction???? a strange Diode of sorts perhaps? Just a thought

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11734 on: January 25, 2016, 09:43:00 PM »
  Yet, it looks like the scope is showing a frequency change with every additional bulb that Ruslan is lighting.  But,  he's showing that he can bring it back to his best frequency point, again.  Or is this happening on it's own?  As I can not see what he's doing.
the push-pull system works like that to tune up when the load does not increase the current drawn from the battery but falls 800mA max incomprehensible.
connect the circuit 28 turnover reflects on a large consumption of energy with battery and if you use only 3 turnovers There is not enough power to light 300 Watt.
so in my case
(Now he has a combustible yoke of plutonium) nuclear reactor or at Hee haa

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11735 on: January 25, 2016, 09:55:15 PM »
   Dog, the earlier Ruslan videos were showing a regular sine wave signal from the Kacher circuit, nothing out of the ordinary.
And the device still would self run.
    I'm trying to replicate THAT effect, if possible.   

  Itsu:  You mentioned that the Kacher can not be controlled by a TL494 circuit, or a PWM. 
Would that still the be case if just using a PWM (simple 555 circuit), onto the Kacher?
  It's interesting what Geo mentioned, that if he raises the duty cycle over 30%, it stops oscillating. 
At least that's how I understand it. 
  Maybe that's why I don't get any interaction, when using 100% duty cycle.  Or not?
  Shortening the duty cycle reshapes the wave form, to produce a higher more pointed peak.  Right?

Nick,

A kachers frequency is determined by its secondary coil inductance/capacitance.
You can decrease the inductance by some ferrite inside the secondary or to add some external capacitance, but not by:
"using a PWM (simple 555 circuit), onto the Kacher"    whatever that means.

Perhaps you can drive the kacher transistor with a PWM, but it still will only effectively oscillate at its secondary coil natural frequency with the risk to destroy the PWM.

Concerning the 30% duty cycle, i am lost, what duty cycle, from what?
I have scanned back through Geo's posts, but do not see any reference to a duty cycle used on the kacher.

The latest Ruslan circuits (Oleg) is pulsing the Kacher on/off at a certain rate, is that what you (Geo) mean?
The pulsing duty cycle is very low, i guess something like 0.05% on or so.

Itsu

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11736 on: January 25, 2016, 10:27:50 PM »
Nick,

A kachers frequency is determined by its secondary coil inductance/capacitance.
You can decrease the inductance by some ferrite inside the secondary or to add some external capacitance, but not by:
"using a PWM (simple 555 circuit), onto the Kacher"    whatever that means.

Perhaps you can drive the kacher transistor with a PWM, but it still will only effectively oscillate at its secondary coil natural frequency with the risk to destroy the PWM.

Concerning the 30% duty cycle, i am lost, what duty cycle, from what?
I have scanned back through Geo's posts, but do not see any reference to a duty cycle used on the kacher.

The latest Ruslan circuits (Oleg) is pulsing the Kacher on/off at a certain rate, is that what you (Geo) mean?
The pulsing duty cycle is very low, i guess something like 0.05% on or so.

Itsu

Hi Itsu.

I actually have similar idea as Nick.  I want to try to pulse Flyback connected to tesla coil. Flyback has frequency in KHz as the current LC loop. And will excite the Tesla coil which has MHz . Theoretically (but probably not) I might see train of pulses? May be Flyback can get damaged ? May be I should take care about the impedance and all will be fine?  I am in the process of reworking of complete coil. Making it much bigger (bigger diameters of wires) also Tesla is now from 0.7 mm heavily insulated wire. (120 turns) Tomorrow I start print the holding structure a before the weekend I might be back to experiment.

That low duty cycle is probably related to unipolars.    Does anybody know how to reduce duty cycle "externally" ? :)  I have SG with only 1% step. I need to be able to tune by 0.1% and not to buy new SG.  :)

Dog-Dog - How is it with the Push-Pull. Did we made a deal or not?  Not sure now.

Starcruiser - Yes I was thinking about it too, but as I said I fail to get any effect out of it. It can change with my new build.  I still keep it in my mind ;)   

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11737 on: January 25, 2016, 11:26:49 PM »
I did a quick calculation for "Fundamental" frequency for the length of 37m for sound in copper and sound in the air   (4760 vs. 343.3)  and I end up  with the common frequency 22.082KHz.
The acoustic fundamental standing wave frequency in copper might be significant, but why would you like to relate it to the standing wave frequency in air?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11738 on: January 25, 2016, 11:33:16 PM »
Nick,

A kachers frequency is determined by its secondary coil inductance/capacitance.
You can decrease the inductance by some ferrite inside the secondary or to add some external capacitance, but not by:
"using a PWM (simple 555 circuit), onto the Kacher"    whatever that means.

Perhaps you can drive the kacher transistor with a PWM, but it still will only effectively oscillate at its secondary coil natural frequency with the risk to destroy the PWM.

Concerning the 30% duty cycle, i am lost, what duty cycle, from what?
I have scanned back through Geo's posts, but do not see any reference to a duty cycle used on the kacher.

The latest Ruslan circuits (Oleg) is pulsing the Kacher on/off at a certain rate, is that what you (Geo) mean?
The pulsing duty cycle is very low, i guess something like 0.05% on or so.

Itsu

   Yes, the video showing how the wave form narrows, and compresses into a wave form obtaining a much higher peak, compared to when that same wave is spread out.
 
   Maybe Geo can explain about the duty cycle causing his induction circuit to stop oscillating, if it goes over 30%.
And his best output is found at around 15 to 20%.  Something like that.
   EDIT:  Minute (2):  https://www.youtube.com/watch?v=J7NDATgOJxE

   Seams that the latest finding by Ruslan is that,  the duty cycle on his HV circuit, is also an important consideration.
If I understood him.

   I do get confused about which duty cycle, to what circuit,  at times.  No doubt.

   Just still looking for a cheap commercial approach to all the drivers.  Or,  a one board fix for all.
 

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11739 on: January 25, 2016, 11:43:08 PM »
Does anybody know how to reduce duty cycle "externally" ? :)   
What frequency and waveform shape?

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11740 on: January 25, 2016, 11:47:21 PM »
What frequency and waveform shape?

Frequency variable and the wave form SQR.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11741 on: January 26, 2016, 12:06:29 AM »
Frequency variable and the wave form SQR.
Variable within what limits?

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11742 on: January 26, 2016, 12:22:56 AM »
10-30KHz?

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11743 on: January 26, 2016, 12:48:47 AM »

   Yes, the video showing how the wave form narrows, and compresses into a wave form obtaining a much higher peak, compared to when that same wave is spread out.
 
   Maybe Geo can explain about the duty cycle causing his induction circuit to stop oscillating, if it goes over 30%.
And his best output is found at around 15 to 20%.  Something like that.
   EDIT:  Minute (2):  https://www.youtube.com/watch?v=J7NDATgOJxE

   Seams that the latest finding by Ruslan is that,  the duty cycle on his HV circuit, is also an important consideration.
If I understood him.

   I do get confused about which duty cycle, to what circuit,  at times.  No doubt.

   Just still looking for a cheap commercial approach to all the drivers.  Or,  a one board fix for all.

PW trigger a timer then use some logic to trigger on an up edge or a low edge till the end of cycle arives simple experiment

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11744 on: January 26, 2016, 01:15:24 AM »
10-30KHz?
One 74HC123 chip will give you adjustable pulse widths down to 0.01% duty cycle, but not directly adjustable duty cycle (independently of the frequency).