Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718931 times)

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11700 on: January 24, 2016, 07:58:38 PM »
I see that vibrates at KHz due to series resonance. But even if it wasn't wavelength related to grenade, then again it would be able to vibrate at KHz due to the series resonance. There is not any sense for inductor to be wavelength related to grenade if it wasn't be for vibrating at MHz. Don't you see the hole??

I can't say for 100%  , Ruslan said this- No bother what resonance is on the grenade. Make it 50Hz if you want. It is just a matter of capacitor you use. 

My understanding is than no bother what is on grenade important is only synchronization of current loop with Tesla. - This two generate electricity. How much you will take it off from the grenade it is probably not as much important?  Like in your car - Your engine runs same RPM and you just convert hem to lower or faster via gearbox?


John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11701 on: January 24, 2016, 08:03:38 PM »
   Hoppy:   Lighting up a bulb or bulbs with more than their needed input power from a PS, does not really show an "effect"?
 

Bulbs shows nothing. You can lit Kwats with couple watts. Have you ever make a Joulethief?  Thats exactly the effect. Or take a look at lasersiebers joule-ringer- cool stuff, still much below OU.  Only looping together as self runner or proper measurements can say about energy in and out. No bulbs. They are only for reference.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11702 on: January 24, 2016, 08:03:51 PM »
    Jeg:
   That's why it has to be a harmonic of it, and not the same frequency. As the induction circuit of the 3 turns coil won't reach the same Mhz frequencies, with the recommended windings, and doesn't need to, anyway. 
 

Nick ;)
Think about it more. If inductor wasn't the 1/3 or the 1/2 of grenade's length and instead it was something far from wavelength relation. Again, if we tune it in series to a KHz harmonic there wouldn't be any problem. It would vibrate at any KHz frequency we like by choosing the right cap. Then why it needs to be the 1/3 or the 1/2 of grenade's length??

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11703 on: January 24, 2016, 08:10:24 PM »
all

I do not want to be pushy but I'd love of the yoke and the tank fire as he 650Watt!
Note that it does not fall so ampere and he says that is not connected transistor from Kacher So where is the truth I ask?
https://www.youtube.com/watch?v=NHpUE6oqt7k
9:15
such an effect, no one showed and from that we start the conversation gentlemen?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11704 on: January 24, 2016, 08:19:03 PM »
  John:
  I worked for quite a while with Joule Thiefs, Joule Ringer, Cross-over Ringers, you name it. As can be seen on my older previous YouTube videos.
  If you can show me any such a Joule Thief related devices lighting up Kwatts of incandescent, (not led or CFL) bulbs. I'll buy it today...
  It does not exist... Kwatts from a Joule Thief...  I don't think so. As they can't even make them self run. As yet.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11705 on: January 24, 2016, 09:01:55 PM »
   
   Hoppy:   Lighting up a bulb or bulbs with more than their needed input power from a PS, does not really show an "effect"?
The effect should produce more that what the input source provided can provide. Or not? So, place more than 360w worth of bulbs on it, not 100w.
I'm not assuming anything, as yet. One way or the other.
  But, I'd like to see more output from a device than what a PS can provide to it, as proof of anything.
   I still don't get the OU, part.  As it has been mentioned that in order to see an effect, that will allow a device to self run, first, it has to provide more power out, than in.  Not just a brighter 100w bulb, that is still not fully lit, by the 360w supply. Even the measurement won't be enough for me,  that in itself is not enough, to show the needed effect.  Self running will do it though.

Nick,

You are talking about a different 'effect' to that shown by Geo and seen by myself. Geo's effect is simply the lamp lighting considerably brighter when the Kacher was energised. The 'effect' that you wish to see is to fully illuminate a lamp load with a total rated power in excess of the power supplies capability. However, as you appreciate, this is not something you would be able to verify just visually, it would necessitate accurate measurement, as was claimed successfully achieved in the OU (but not self-running) Lithuania experiment reported by Wesley.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11706 on: January 24, 2016, 09:07:32 PM »
    Tomtech:
   Good call.  But, he certainly is not lighting up those bulbs with anywhere close to 650w. So, he shouldn't say that he is.
   But, Akula and Ruslan should show what they have never shown, the most important proof of all, that is, lighting up all the bulbs much brighter than just barely lit, when he connects his HV up to it, as well. To really show the interaction, with the full load.
   Why don't they ever show that effect? Ever...
 
   MagPwr:
   I can easily make the same or bigger sparks appear on my ferrite rod, as Akula had shown. With just a transistor, diode and resistor as my Kacher circuit. No problem there.  But, I still have no influence to be seen at the bulbs, as yet.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11707 on: January 24, 2016, 09:23:27 PM »
    Tomtech:
   Good call.  But, he certainly is not lighting up those bulbs with anywhere close to 650w. So, he shouldn't say that he is.
   But, Akula and Ruslan should show what they have never shown, the most important proof of all, that is, lighting up all the bulbs much brighter than just barely lit, when he connects his HV up to it, as well. To really show the interaction, with the full load.
   Why don't they ever show that effect? Ever...
 
   MagPwr:
   I can easily make the same or bigger sparks appear on my ferrite rod, as Akula had shown. With just a transistor, diode and resistor as my Kacher circuit. No problem there.  But, I still have no influence to be seen at the bulbs, as yet.

Nick,

I managed to light my bulb much brighter when the HV from Kacher was connected. This is not proof of anything special happening, any more than you getting big sparks off your ferrite rod. Lamp brightness is only good as a reference.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11708 on: January 24, 2016, 09:39:46 PM »
  John:
  I worked for quite a while with Joule Thiefs, Joule Ringer, Cross-over Ringers, you name it. As can be seen on my older previous YouTube videos.
  If you can show me any such a Joule Thief related devices lighting up Kwatts of incandescent, (not led or CFL) bulbs. I'll buy it today...
  It does not exist... Kwatts from a Joule Thief...  I don't think so. As they can't even make them self run. As yet.
Nick, Can I fit 10 x jouel thiefs each 10W consumption and powering 100W bulb on one plate and call it one device?? :)  (this is what I was approximately getting at the time I was messing with this stuff)
Guys, Just forget about the bulbs as a measurement device. It says nothing. When you ,make a video, use the meters to show what is going IN and OUT. Not a light on the bulb.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11709 on: January 24, 2016, 09:45:51 PM »
Guys, Just forget about the bulbs as a measurement device. It says nothing. When you ,make a video, use the meters to show what is going IN and OUT. Not a light on the bulb.

John,

I think your preaching to the converted all bar Nick.  :(

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11710 on: January 24, 2016, 09:49:08 PM »
all

I do not want to be pushy but I'd love of the yoke and the tank fire as he 650Watt!
Note that it does not fall so ampere and he says that is not connected transistor from Kacher So where is the truth I ask?
https://www.youtube.com/watch?v=NHpUE6oqt7k
9:15
such an effect, no one showed and from that we start the conversation gentlemen?
Hi Tom, If I good understand, he says he left Kacher and using  HV control unit.  This is why he has a transistor from Kacher alone.   

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11711 on: January 24, 2016, 10:38:02 PM »
  Hoppy:
  Although being able to get good spark off of the ferrite rod does not proof anything special, it does show that there is enough intensity of spark to be able to do it's job. To some degree. We still don't know what the HV intensity minimum levels need to be.
  And whatever that ferrite rod is doing to the output, one thing I can see is that the HV stinging, is much more intense, and hard to take onto ones finger, for more that a second, or two. 

  I have to say that although it may sound like I'm maybe not too impressed by the last videos, by Geo, and others.  I really am.
And, he deserves some merit, for doing what has done up to now, even without a scope, frequency analyzer, signal generator, etz... My hats off to you, Geo, and anyone else still working on this.

  Jeg:  I thought the same concerning tuning using caps to obtain the wanted frequency. But, if the winding counts are way off, the tuning caps may not make up for it.
  Isn't THAT,  what the TL494 circuit is supposed to be doing? 
 
   I use ferrite in the grenade core, and magnetite on the yoke, to adjust the induction circuit frequency. So, not too many components to fry out, when resonance really kicks in. Which I've seen it do it a couple of times, kick into a much higher resonant point. But I haven't been able to maintain it for more than a second, and it dies out, and losses the sync. As if it lacks guts.
 
   My Kacher can be controlled from about 1Mhz to almost 2Mhz, just by moving the ferrite pieces in the core.

   Notice how long Ruslan's last Kacher secondary coil is. Almost as wide as the grenade.
So, it's probably not running in the Mhz range. But, in Khz instead.  Like Geo's 10 Khz induction circuit, or so, and he is also using a double wide Kacher secondary coil to sync with his induction circuit. Like Ursa or Urfa, has, also.
  The guys with the effect...  there are several others, as well,  on YouTube now.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11712 on: January 24, 2016, 11:07:56 PM »
Nick, Can I fit 10 x jouel thiefs each 10W consumption and powering 100W bulb on one plate and call it one device?? :)  (this is what I was approximately getting at the time I was messing with this stuff)
Guys, Just forget about the bulbs as a measurement device. It says nothing. When you ,make a video, use the meters to show what is going IN and OUT. Not a light on the bulb.

   John K1:
   I think that we get the point about measurements, and all. But, you should do this yourself, first, to see how it's not so easy in practice, as it may seams in theory.
  There is probably a good reason why the output power has never been shown, on any of the Akula/Ruslan devices, by any one, as compared to the input. At least not yet.
 Try it, and see.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11713 on: January 24, 2016, 11:28:12 PM »
   John K1:
   I think that we get the point about measurements, and all. But, you should do this yourself, first, to see how it's not so easy in practice, as it may seams in theory.
  There is probably a good reason why the output power has never been shown, on any of the Akula/Ruslan devices, by any one, as compared to the input. At least not yet.
 Try it, and see.

I did nick ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11714 on: January 24, 2016, 11:41:01 PM »
   And you found it to be way under-unity? Like most everyone else that has tried to do so. But, what does that prove?
  Ruslan's devices may also show underunity, as well, if measured by normal standards, but they can self run, when he pulls the plug.
   It will take one of us to measure the levels. That is, when some one really has something to measure. 
   It will come... 
   You said, don't let the bulb brightness be your guide.  Of course not!  That's what I've been mentioning all along.
 But, maybe think about making it self run, first. Then measure it all you want, after that. 
Or before that, also,  it's up to you.