Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11803067 times)

John.K1 · « **Reply #11655 on:** January 22, 2016, 09:22:30 AM »

Quote

So I would have to agree Geo, we have a system that is mixing amperage and voltage from two different
sources giving us real output power.

I do not fully agree. Only mixing imputed energy can't lead to OU. Freaky guy Atom93 asked you "What is the food?" and he is right. What is the extra input into your system? Just mixing given portions of input energies will lead to less energy out due to law of conservation of energy. So before you mixing you voltage and amperage, where is that moment the extra energy enters your system and why? Ruslan was speaking about it, I was telling you, I gave you a video where other Russian guy was talking about it (also wondered why Ruslan didn't explained it to you in more detail), Akula was talking about it . Listen what those guys say

That's my advice. I just blew off a dust from my device and will start to work on it soon again. Let's see. Ruslan was also speaking about the possibility to use spark gap in his video. What does sparks do? Still the same question. Push-Pull only spins the gathered energy- it is not a source. Showing videos running couple hundreds watts from push-pull it is just a inverter- nothigk more-nothing less.

See you soon.
Regards

Tomtech29 · « **Reply #11656 on:** January 22, 2016, 11:32:07 AM »

Hi.
I saw this stuff, and I have the impression that, as it turned kacher bulb get dim 200Watt!
https://www.youtube.com/watch?v=jjCbF9YjB4Q
the effect is counterproductive moreover, when disconnected Kacher it and so these bulbs are lit with the same push-pull with the same power

anyone know what this is about?
This person says he has a different opinion on the scheme which gave Ruslan but what he just really wants to show?

AlienGrey · « **Reply #11657 on:** January 22, 2016, 01:47:02 PM »

Quote from: Tomtech29 on January 22, 2016, 11:32:07 AM

Hi.
I saw this stuff, and I have the impression that, as it turned kacher bulb get dim 200Watt!
https://www.youtube.com/watch?v=jjCbF9YjB4Q
the effect is counterproductive moreover, when disconnected Kacher it and so these bulbs are lit with the same push-pull with the same power
anyone know what this is about?
This person says he has a different opinion on the scheme which gave Ruslan but what he just really wants to show?

Hi thats interesting I tried it with an ordinary toroid but didn't get much back just an over heating transformer, but what happens if you reduce the current with a very low value resister through the thick feed back loop ?

GeoFusion · « **Reply #11658 on:** January 22, 2016, 07:04:57 PM »

Hi Guyz.

Nick,
I saw your pic/ setup

and the mediator you have wound, reason why its maybe dimming is
because it's not resonating with the bifilar coil on the grenade with the cap in series and to be just sure if connections are good.
Yes, try to find that 1 1/2 inch toroid, see if there is any difference.
You will need a tunable circuit to find resonating point with the cap
you have connected you need to see if you can light a small bulb only using 3T coil. as test. without 28T.
Yes Akula/ Ruslan and especially Dally used their cores as mediator, Akula used his 28T as output to kacher.
same as how Sergey replicated his recently. same connections.
The URFA setup is new, has alot of new fields to explore still.

Dog-One,
Yes the schema is very simple, yet easy to read and replicate if you take time, the computer generated one
is very nicely done, makes it easy to build the boards that way.
Yeah, saw same minor oddness in schema too, but there you see in his vid which you have now in downloading the torrent,
he shows the schematic of current setup. yea, the older handraw is slightly different, but hey he is experimenting
to see which one is best

.
yes his simplicity makes it easy to set things up. Takes just a bit of time.
now I know there needs to be a sharing connection within the circuit (mediator) and Yoke also.
Well massive heatsinks for sure because of massive loading that occurs at output.
takes alot of stress especially for Fets and Diodes.
yes, most likely this system is mixing,
But The Extra Ambient Radiant energy is what makes the torsion field large, because of the tesla

.

Btw that SparkGap you saw, is strait to ground at the other end after spark. I think it's a tuning but at the same time just a Indicator.

John.K1,
well for what I know in the beginning it's not OU yet untill it's propperly tuned and with ground connected

but for sure we should never forget that this system is using ambient energy for
multiplication. because of Tesla coil. ground is essential , it shows power at ground in one of my recordings.
Yoke is Inverter, yet it will give the two External components the agreement to mix.
Yet it will enhance the torsion field around the output coil
The spark seems to work as indicator when system is on,
Spark leads strait to ground after Sparkgap or it's a adjuster for output for sure

.

Cheerz~

John.K1 · « **Reply #11659 on:** January 22, 2016, 07:58:47 PM »

Hi Geo. Yes, but how do you catch that ambient energy?? How should Tesla work to catch that "ambient energy"? Tesla itself is not a Free energy or OU device. Who got the train of pulses (in words of Ruslan- Pachky impulsov) on antenna, please present your picture and share your experience .

GeoFusion · « **Reply #11660 on:** January 22, 2016, 08:37:44 PM »

John.K1,

part 1
https://www.youtube.com/watch?v=qEHKGSLy938

part 2
https://www.youtube.com/watch?v=7ELg1TclytM

If we take a look, Tesla coil on it's own is OU, for generating HV in great amounts. It Pulls ambient towards it, like a vacuum.
we see that when we see the Purple Corona at the ends.
I know Ruslan told us about Pachky impulsov , I think it is to multiplication within the electrostatic field within the field for effect.
not sure.

Below I have a schematic of what I have currently on my bench. with Mediator core for Synchronizatie

John.K1 · « **Reply #11661 on:** January 22, 2016, 08:52:14 PM »

Geo: I tell you what I think- Packy impulsov- UNIPOLAR impulses on antenna = one plate of capacitor. Grenade coil = second plate of the coil. So we got a asymmetric capacitor- you can read about its advantage in Utkins papers. Why uni-polar impulses? Because we want to have only one type of charge on the antenna so the other charge on much bigger surface can form from ambient. And now why do I think this way? Akula- is speaking about them, Ruslan is speaking about them saying the people unfortunately still omitt this important information (eto k sazelenju on skazal

) This guy speaks about it such a way as he knows for sure : https://www.youtube.com/watch?v=VGuw3QvoseI and the last is Stan Mayer using very same principle just in different device.

Capacitor - very simple- no magic waves and all that crap. Attract the negative electrons from ground as much as you can thanks to the thick wire.

That's the flow of my thoughts and that's what I will start to work on tomorrow again.

GeoFusion · « **Reply #11662 on:** January 22, 2016, 09:13:31 PM »

John.K1

yes we got a asymmetric capacitor being formed. I did folow Akula and Ruslan, Also read Utkins papers,
have done some of his experiments , but yes unipolar impulses is needed

.

You know befor I connected the Kacher to Grenade
I experimented with kacher this way, just like this man.
vid below.
https://www.youtube.com/watch?v=_R0HQksUSeY

Then I knew Grenade was asymmetric capacitor, ground is the negative charges that is why it needed

, i know.

Yes, lets continue the experimentations, we have all the info we need now, but alot of experimentation required.

This guyz also managed Effect

https://www.youtube.com/watch?v=faCaYvh69Bs

John.K1 · « **Reply #11663 on:** January 22, 2016, 10:22:47 PM »

Thanks Geo. It looks like we are on the same wave

Now the question is how to create that uni-polar pulses. My guess is they are formed on the ferite rod between the Tesla and antenna. My previous experiment some time back was unfortunately unsuccessful ;( Any idea? I can get them easily on the toroid with two coils.

Dog-One · « **Reply #11664 on:** January 22, 2016, 10:59:44 PM »

Here's a comment from Ruslan that I think needs to be studied:

Quote from: Ruslan Kulabuhov

So I understand that you are still looking for the impulses? Stop this stupid experiment was carried out on the system. All wrong. Powered magnetic field. Current voltage is subject to Tesla. It is for this reason that the scheme is Kacher Sharks. He is always in resonance. So stress is always in the "Antenna" current in the transistor base. So it is working Kacher. Just all the hammering impulse without examining the AC Tesla pump and so on.
Pumping of the inverter at low cost creates a strong current in the wire, and therefore the magnetic field induces crazy. As we can see from the rollers and Roman Kapanadze, the inductor is always on the side !!! That this is necessary to understand all of you. Why ? Why such a magnetic field! How does it help us to get inexpensively free energy generator. Open the curtain ... This system reminds us of a normal generator. Where the rotor turns inside the stator. Stator - detachable coil, rotor - magnetic field, moving inside. And what drives the magnetic field inside the stator in this system? Turn the head at last! Tip 2: How to influence current tension, especially in the half-wave?!

So the inductor having heavy current is on the side (not the middle and not across the whole grenade or Dally coil) and for good reason. This heavy current is where the strong magnetic field comes from. I have proven more than once this is the "force" that will heat a steel screw driver. Ruslan is implying this magnetic field is driven by the charge during the half cycle of resonant oscillation. I'm assuming if you don't drive it, then it will just sit there in-place. If you do drive it, then it must enter the wire and become real electrical current at the load.

So close to understanding what electricity is and how it actually works, but not quite there yet. If we can just understand this, building OU devices should be child's play.

Tomtech29 · « **Reply #11665 on:** January 23, 2016, 02:40:52 AM »

Hi.
Guys
sit two days on this system and I can not continue to run it? (would any of you see this scheme and help me)?
I can not find the cause of what is happening
-I have a signal on 74Hc14(74Hc132N) the second leg 29Khz and the sixth leg of the high frequencies(543Khz-5.88Mhz), tune 2K. but after plugging 74HC00 the signal disappears! (He changed a few other 74HC00 and is the same)
I do not have an output from the 74HC00 to control mosfet! (the driver also took out) maybe something need to change the scheme if what do you suggest?
- use such a scheme:below
if you think that the pattern is fine (OK) should work to let me know I'll be kicking.(I'm starting to worry I could start on the model if it works at all)?

Jeg · « **Reply #11666 on:** January 23, 2016, 09:37:49 AM »

Hi JohnK1, Geo
I spent a lot of time to make unipolar pulses at katcher's output. The only way i did it was when i intercepted a diode between katcher coil and antenna, and adding in addition a small cap between antenna and ground. The problem is that the use of diode at this point, kills the HF resonance of kacher, driving it oscillate to a much lower frequency. So i guess this is not the right way. Also, the use of ferrite between katcher and antenna doesn't give any rectification to the pulses. I concluded that ferrite can only shape the form of pulses making them narrower depending on the type of ferrite. But there is no rectification there also.

I wish i am wrong but doesn't look like that we can get something more just by combining HF and Current. It is something more than that. Also for me, there is no way a Tesla coil to be an OU device by itself. A Vacuum pump? Yes you can call it like that, but with expense. You take back no more than what you give to the system. Is there any opposite opinion based on proven facts?

magpwr · « **Reply #11667 on:** January 23, 2016, 01:22:15 PM »

Quote from: Tomtech29 on January 23, 2016, 02:40:52 AM

Hi.
Guys
sit two days on this system and I can not continue to run it? (would any of you see this scheme and help me)?
I can not find the cause of what is happening
-I have a signal on 74Hc14(74Hc132N) the second leg 29Khz and the sixth leg of the high frequencies(543Khz-5.88Mhz), tune 2K. but after plugging 74HC00 the signal disappears! (He changed a few other 74HC00 and is the same)
I do not have an output from the 74HC00 to control mosfet! (the driver also took out) maybe something need to change the scheme if what do you suggest?
- use such a scheme:below
if you think that the pattern is fine (OK) should work to let me know I'll be kicking.(I'm starting to worry I could start on the model if it works at all)?

hi Tomtech29 and everyone,

I have attached waveform and circuit diagram as downloaded from the huge torrent related to Sergey.
The circuit diagram was only revealed for a brief moment in one of the Russian video discussion as found in the torrent download.

2 things to note
1)Base on waveform sergey is using 1/100 ratio for the frequency.If the tesla frequency 1.66Mhz the pwm frequency is 16.663khz.The only thing i can't tell if the frequency in Mhz is derived from interrupter pulse ,harmonics or just tesla frequency.

2)Sergey circuit although i got no time to study this it would be likely generating few interrupter pulse say 5...9pulse in a row.
If you are familiar with tesla coil and interrupter circuit.I think Sergey is running this interrupter pulse at tesla coil resonance but using only 5...9 pulses in a row,in nanosecond.
"Like he is aiming for nearly maximum point and not going further."

Oleg circuit merely generate single nanosecond pulse compared to Sergey's circuit.

But i do find it strange Sergey's circuit did not Superimpose high frequency in Mhz to center tap.Worst there is no choke implemented.Maybe this was his early design.

-----------------------------------------------------------------------------------
My last experiment with "Tesla Transponder 2.0" circuit with interrupter pulse (10...20pulse in a row)without kapanadze coil yield max 32Amps to Earth .Power using full bridge rectifier from a high power 12 to 220volts inverter.
Interrupter circuit does produce little better output at a cost of increased current draw.

---------------------------------------------------------------------------------

All the while my primary aim without dabbling further was just to get some spark from the ferrite rod which i had failed miserly."This was the test Akula did before even providing power to the bulbs in the old video"

After watching the recent video of Geofusion.This gave me hope to complete this feat successfully at least.

.

John.K1 · « **Reply #11668 on:** January 23, 2016, 01:35:24 PM »

Hi Jeg, others

I was reading some comments from Ruslan last night and it is now even more confusing. He says: " Forget about that stupid pulses, my device work on the principle of mixture of Longitudinal and transverse waves. How many people has done this? No one of you!! ....."

If I understand right, transverse waves are for example- sound. Is any of his coil tuned to the frequency of sound in copper? I know a device which works on this principle and how it works. But this device? Why didn't he tell us before? Why is he now speaking about it? Is it his aim to confuse us? Why does he says nobody has done it, and in previous posts he says several people made the device?

looking at it from the - other side we have charged particles on our asymmetric capacitor in enough high density and now - accelerate them. Possibly strong enough magnetic field and transverse waves comes to play its role?

What are your opinion about the principle of this device. Let's elaborate it here together.

Hoppy · « **Reply #11669 on:** January 23, 2016, 02:26:33 PM »

Quote from: John.K1 on January 23, 2016, 01:35:24 PM

What are your opinion about the principle of this device. Let's elaborate it here together.

Hi John,

It has been strongly suggested that Ruslan, Akula and others are seeding disinformation, so its probably best to take what they say with a pinch of salt.

These devices are basically assymetric capacitors, where the earth acts as a return conductor for HF currents when grid connected PSU's are used. T1000 has given good advice by advising experimenters to ditch these PSU's and replace with battery supplies. Surely this makes sense, as the grid should play no part if we are to believe that both Ruslan, Akula and others are demonstrating genuine self-runners. I'm hoping that Geo and Nick take his advice and show their devices running on a battery in any future videos they post. I see nothing unusual about the operation of the devices and the 'effects' I've so far seen demonstrated, where they are powered by grid connected PSU's.

News:

User Menu