Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719597 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11040 on: October 24, 2015, 11:43:36 AM »
  Seams like this guy Y pok has obtained the "effect".  And is showing what I had always wanted Akula and Ruslan to show. Only he has only one bulb as the load, and no feed back loop yet.
https://www.youtube.com/watch?v=faCaYvh69Bs

Nick,

That's the effect I achieved on my build but it was not a true power amplification (as referred to as being the necessary effect by T1000) in my case. The increased lamp brightness resulted in increased power draw from the supply. It would have have helped if Y pok showed a measurement of the supply current and voltage with and without the Kacher connected.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11041 on: October 24, 2015, 11:53:33 AM »
@Itsu

You can pull on pin9 of the CD4046 like in this video to inject a phase offset into the PLL and see for yourself how the AC voltage source transfers energy to the LC circuit at various phases.


Right,   presently it has some fixed RC values attached:


Itsu

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11042 on: October 24, 2015, 12:02:12 PM »
Hopy, Itsu

I agree, there is nothing special in the last posted movie. I have also many many many  pages back showed light of 20W microwave bulb on the granade coil (one wire setup)  from the Kacher and so far we didn't get more than inefficient  inverter :)  I think LaserSiebers jouleRinger works better so far to compare what we have:)  BUT - it can change if we get the effect based on the unipolar HV pulses - that's what I believe ;)   Also in several movies (this guy, Akula, also partially Ruslan ) they mentioned the word or keywords "plasma" in the wire. "plasma trapped in the magnetic field etc.   Something which should be considered too. In fact it is somehow logical as the HV creates plasma. You can agree or not, I do not border - but this is the fact you can't obey ;) 

Anyway. What I am gonna to do today is to get ridoff the Kacher and to use some of the cheepo SG   running Mosfet driver and mosfet at 5th or so harmonic of the frequency of the Tesla coil. SG will make  SQR pulses and I can easily change requency and duty cycle (which controls number of uni-pulses)    .  That's the first stage.

Edit: To clarify it a bit better -We have a Tesla coil which natural frequency is 1/4 o the grenade coil -let's say 1.5MHz - My SG will fire from (1500/5) =  500KHz down on primary .  Than, I will tune the duty cycle (maybe even frequency to next harmonic)  to see some number of unipulses.  The sychronisation will be next step after I will see HV unipolar pulses on my antenna.

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11043 on: October 24, 2015, 12:42:10 PM »
  Seams like this guy Y pok has obtained the "effect".  And is showing what I had always wanted Akula and Ruslan to show. Only he has only one bulb as the load, and no feed back loop yet.
https://www.youtube.com/watch?v=faCaYvh69Bs
HI.
With the translation of message Ruslan:
"Here incorrect diagram! I posted a video of his new scheme with explanations. There Kacher controlled. Do not worry with these stupid things .... it will not work! You need momentum to the antenna width of 200-500 ns. Besides push-pull must have a PLL, and the momentum to get hump sine and customized to its duration. In addition to the coil sinus nor any other signals and beards should not be."

Guy directly comment on what is wrong and analyzed by the agreement outora see!
and what I see discovering the successive stages and has concepts
I will not convince anyone because it is not a vocation
time passes and uncertainties are shrinking!

Tomtech29

  • Sr. Member
  • ****
  • Posts: 447
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11044 on: October 24, 2015, 01:05:35 PM »
<<it was very much fun to work in a team! and I thus learn from others.
-for me that is what counts and desire to show their work at distances contentment and joy not base it personally try not to be malicious
I would like to to look in this direction was more and more >>

John.k1
badly was you misunderstood my words
1)I would like to see how you're doing
2) do not worry about failure Show what is wrong without <<shame>> no (embarrassment) vice versa in the sense?
3) as you obtain these peaks Karcher-Your current Tesla coil working with such an impulse?
4) Did you use a ferrite rod to tune T.Coil  or if your attempt with adjustable frequency by FG.?
Regards
T.Tech
« Last Edit: October 24, 2015, 06:31:37 PM by Tomtech29 »

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11045 on: October 24, 2015, 02:30:10 PM »
<<it was very much fun to work in a team! and I thus learn from others.
-for me that is what counts and desire to show their work at distances contentment and joy not base it personally try not to be malicious
I would like to to look in this direction was more and more >>

John.k1
I would be happy to see your work as you approach the topic openly and without embarrassment (it's not a rat race)
Regards
T.Tech

Hi Tomtech , I have no Idea what you mean with that last post to me. Not sure how to understand it. Am I embarrassing some one?? Or do you think I have not build that device yet and only talk?  In that case the picture of my  device I made an year ago on the picture below. And If I embarrass someone- can you say who? And I am sorry for that :)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11046 on: October 24, 2015, 02:53:49 PM »
Nick,

That's the effect I achieved on my build but it was not a true power amplification (as referred to as being the necessary effect by T1000) in my case. The increased lamp brightness resulted in increased power draw from the supply.
I m not sure if you still miss history for the hunt of effect but will try to point into right direction.

Do you know story about N. Tesla story and exploding power substations on his time? Before filters was implemented there. If you do, just I will ask two logical questions:
1) Where the power was coming from to cause explosions in transformers like in bombs?
2) How to produce these explosion conditions on intent then transform into usable energy for the load?

The two things are involved there: the explosive longitudinal waves causing sudden disruption of the current and the inertia of mass of electrons in wire which keep it moving when power source suddenly gets disconnected. The aim is on this thing as you still have energy after power gets disconnected and due explosive nature it is powerful enough to explode wire if the energy is not redirected to somewhere else.
If you can reach and amplify this effect (the opposite what electrical engineers are trying to avoid with filters and snubbers in power substations) the progress will be quick to realize its potential.

P.S> I still would like to refer into article about N. Tesla fireballs and his famous quote about stray high frequencies imposed into low frequency and what it cause but I did linked quote few times here already without any proper understanding and response.

Good luck!

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11047 on: October 24, 2015, 03:07:33 PM »
Hi T1000,

What you say it reminds me T. Bearden.  There was something like if you disconnect the source before the wave reach the end, its energy will be radiated as a scalar wave- or something like that?  In the Ruslan's work it looks to me more like you create big spikes of potential energy (unipolar spikes of several tens thousends of volts) which creates massive potential difference on the cap/coil, so it maybe sucks the free electrons to balance it??

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11048 on: October 24, 2015, 03:17:10 PM »
I m not sure if you still miss history for the hunt of effect but will try to point into right direction.

Do you know story about N. Tesla story and exploding power substations on his time? Before filters was implemented there. If you do, just I will ask two logical questions:
1) Where the power was coming from to cause explosions in transformers like in bombs?
2) How to produce these explosion conditions on intent then transform into usable energy for the load?

The two things are involved there: the explosive longitudinal waves causing sudden disruption of the current and the inertia of mass of electrons in wire which keep it moving when power source suddenly gets disconnected. The aim is on this thing as you still have energy after power gets disconnected and due explosive nature it is powerful enough to explode wire if the energy is not redirected to somewhere else.
If you can reach and amplify this effect (the opposite what electrical engineers are trying to avoid with filters and snubbers in power substations) the progress will be quick to realize its potential.

P.S> I still would like to refer into article about N. Tesla fireballs and his famous quote about stray high frequencies imposed into low frequency and what it cause but I did linked quote few times here already without any proper understanding and response.

Good luck!

Logic tells me that as this was a momentary effect at the instant of switch disconnection, irrespective of where the power was coming from, this 'explosive' condition cannot be maintained under controlled pulsed conditions, without a continuous source of power being available to the device. I'm not ruling out the possibility that some form of external energy enters the device under certain conditions, just that it cannot be maintained without a permanently connected power supply. So its your stage 2 of the process that I suggest is not feasible. Nobody has satisfactorily demonstrated the stage 2 self-running condition (loop-back with supply disconnection), so the jury remains out.

So, I do not have a problem with Tesla and his famous quote, just those people that take his statements out of context and believe that this quote automatically infers that a self-running device with a disconnected power supply is possible.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11049 on: October 24, 2015, 04:41:16 PM »
I connected up the grenade to the 28 turn secondary of the yoke, i also installed a FWBR (4x UF4007's for the time being), and i have
installed a ground to the key components (Kacher secondary, Inductor at the resonance cap, and the grenade where the FWBR is) as per the diagram.

The DMM across the 2 POI output caps (10uF) shows we have 240V DC when in resonance (with 1x 40W / 220V bulb), but it drops to 60V when adding
another 100W bulb because we are out of resonance (18KHz) while the PLL still maintains a lock.

Not sure why the PLL still is in lock while we clearly are off resonance, something with the feedback seems not in order.

Video here:  https://www.youtube.com/watch?v=VTp44rWoAJA&feature=youtu.be

Regards Itsu

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11050 on: October 24, 2015, 04:49:27 PM »
  Hoppy and Itsu:
  I remember the increase in power that both you and Itsu had previously shown. HOWEVER, that is no where the same increase as what is being shown by this last Russian guy, (I forget his name).
  I also had a similar increase in bulb brightness at one point, comparable to what you guys were showing before, but I attribute that to the normal added voltage being injected by the Kacher to the induction circuit, which only caused a very slight increase to be noticed at the small 20w bulb. But, that increase in output, was not anywhere close to being able to double the brightness of a regular size grid bulb (of unknown wattage), as is being shown by this Russian guy.  And I doubt that he has anything but regular HV pulses, and not the packets of pulses, that some of you are working towards.

  I tried to take a picture of my Kacher's streamer,(3-4mm) jumping to my finger, as Ruslan had shown. But if I get my camera any closer than about a foot away, the camera goes nuts, now. This did not happen before, so I attribute that, to the increased output of my current Kacher's signal.

  Can some one explain where the 26kv is supposed to be coming from, as the Akula/Ruslan Kacher secondary is short, and I don't see that kind of voltage being displayed.  Akula showed some tiny 1mm sparks are the ferrite rod, not anything like what 26kv would produce. And Ruslan has shown nothing other but a 3mm stream. So, where's the this 26kv, with sharp peaks that I'm hearing about being shown at.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11051 on: October 24, 2015, 05:05:21 PM »
  Can some one explain where the 26kv is supposed to be coming from, as the Akula/Ruslan Kacher secondary is short, and I don't see that kind of voltage being displayed.  Akula showed some tiny 1mm sparks are the ferrite rod, not anything like what 26kv would produce. And Ruslan has shown nothing other but a 3mm stream. So, where's the this 26kv, with sharp peaks that I'm hearing about being shown at.

I think if we will figure this out we will have working device. I can't imagine how energy of 1-3 mm streamer can delivery KWs too :)  BTW- good question for TK. He is a an expert over HV.

Edit1:  That guy is also speaking about this in his video clip :  https://en.wikipedia.org/wiki/Electrodeless_plasma_excitation      If you get any idea what is the connection to Ruslan's  device let us know ;)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11052 on: October 24, 2015, 05:22:34 PM »
I understand as you mentioned that prior, the post I made prior was to replace the cap (C1 = 3300pf) with another value to see how this impacts the shift. You thought I was referring to the cap feeding the PLL timing.

Starcruiser,

ok,  i changed the C1 (added 47nF to the 3.3nF for a total of 50nF), see diagram.
Now the Kacher gate pulse is moveable to beyond the current peak up till about 180°.
So i am able now to fire the kacher ontop of the current peak, see screenshot.

Video here:  https://www.youtube.com/watch?v=L6xXGsilriI&feature=youtu.be


Thanks,  regards Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11053 on: October 24, 2015, 05:34:22 PM »
Here a zoomed in screenshot of the firing of the kacher (purple) ontop of the current peak (green).
Gate pulse is at its maximum width and narrowing it down decreases the kachers amplitude
The kacher runs/rings at 1.28MHz, see top right purple delta data.


Regards Itsu

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #11054 on: October 24, 2015, 05:51:40 PM »
Starcruiser,

ok,  i changed the C1 (added 47nF to the 3.3nF for a total of 50nF), see diagram.
Now the Kacher gate pulse is moveable to beyond the current peak up till about 180°.
So i am able now to fire the kacher ontop of the current peak, see screenshot.

Video here:  https://www.youtube.com/watch?v=L6xXGsilriI&feature=youtu.be


Thanks,  regards Itsu
Hi itsu,

Introducing bigger cap lets you give more time for delay but also you need to be aware of catch 22 situation if your PLL trigger input is still on the peak of voltage. The time delay you set on pot will not match time delay between voltage and current peaks if the frequency will change too much.