Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719746 times)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10830 on: October 14, 2015, 08:49:32 PM »

Dog,

yes i build it partially, i am missing the transformer, but the rest is working.
The R32 (12K) was changed into a 20K pot, and this regulates the frequency between 36KHz TO 85KHz.



All,

The following diagram was taken from this forum:

http://realstrannik.ru/forum/39-kapanadze/134930-ustanovka-ruslana-kulabuxova.html?start=5166#274580

it shows a possible sync of the Kacher and a fast decay (ringdown), at least faster then what i noticed above.
In red above the text, the translation (google)


Regards Itsu 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10831 on: October 14, 2015, 10:08:01 PM »
Have you guys built this inverter circuit and tested it?

I tried it with several input voltages using a cwsbytemark.com MegaFlux toroid core and was able to adjust secondary turns to pretty much get any voltage I want.  My thought was to run at about 1/3 of the max voltage the IRFP460.  Make R32 adjustable and find C27 to be near a midrange point where the frequency is most efficient for the core you are using.  Try not to run it too fast as the IR2153 can only handle so much drive current on the MOSFETs.  You won't burn up the chip with R30 & R31 in-place, but the waveform will begin to slew pretty bad; consequently the MOSFETs will begin to run hot.  Check the heat on R27.  When things are right, it should run nice-n-cool.

yes i made a device like that ages ago, but i dint drive the fets like that, i used 2 driver transisters on each phase in a totem pole configuration, it will drive a 100watt light bulb dead esy.

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10832 on: October 14, 2015, 10:56:27 PM »
The following diagram was taken from this forum:

http://realstrannik.ru/forum/39-kapanadze/134930-ustanovka-ruslana-kulabuxova.html?start=5166#274580

it shows a possible sync of the Kacher and a fast decay (ringdown), at least faster then what i noticed above.
In red above the text, the translation (google).

Voltage is the blue trace and current the red trace correct?  Current lagging voltage by 90 degrees--standard no load resonant behavior.

So it looks like you can trigger the Kacher at the current zero crossing upswing the way Ruslan's circuit does or from the peak voltage, either should work fine.

I can't tell if the trigger initiates a burst or not.  It appears that it does with only two or three cycles.  It could be the bucking coil wound ferrite stick does this from a single impulse.  Just not sure.  Regardless, if this is the kind of waveform needed at the antenna, it is surely doable.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10833 on: October 15, 2015, 11:28:33 AM »

So it looks like you can trigger the Kacher at the current zero crossing upswing the way Ruslan's circuit does or from the peak voltage, either should work fine.


Hi Dog-One
Triggering on voltage or on current peak should be determined of your 28T output configuration. If you connect your 28T in series with your grenade then you need to trigger on current peak. If you have a tuning capacitor in parallel with your 28T (Allegga's circuit)  then i think normally you should aim on voltage peak sensed at this 28T tuning capacitor's plates.

ps. May i assume that Allega has a successful running replication? Is there any video link to it?

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10834 on: October 15, 2015, 12:00:33 PM »
Voltage is the blue trace and current the red trace correct?  Current lagging voltage by 90 degrees--standard no load resonant behavior.

So it looks like you can trigger the Kacher at the current zero crossing upswing the way Ruslan's circuit does or from the peak voltage, either should work fine.

I can't tell if the trigger initiates a burst or not.  It appears that it does with only two or three cycles.  It could be the bucking coil wound ferrite stick does this from a single impulse.  Just not sure.  Regardless, if this is the kind of waveform needed at the antenna, it is surely doable.


Dog,

i was more looking at the Kacher ringdown then the relationship with the sine wave signal below it, but now you mentioned it, it does not make sense, what is this sine wave?

Is it the inductor voltage/current (i guess U is voltage and J is current, but perhaps our Russian frriends can confirm)?

If so (inductor current/voltage), then i would expect it to be in (series) resonance, meaning voltage and current in phase!
http://www.electronics-tutorials.ws/accircuits/series-resonance.html

So why the voltage / current phase shift?

Regards Itsu

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10835 on: October 15, 2015, 02:35:03 PM »
I am wondering if this is the missing part of the Kapanadze puzzle.


Any constructive comments??


http://crystalradioinitiative.com/

I believe the FE diagram is here http://www.gestaltreality.com/energy-synthesis/eric-dollard/additional-posts-by-e-p-dollard-2012/

Yes i Have, if your serious about getting this device to work i suggest you get this information it does explain a hell of a lot, other wise your just pissing in the wind, happy tinkering to all ;)
After thought, The video did have a link on the energetic forum but has since been taken down since 'DOG posted this info'. the book is also a video and is protected by copy right. happy days to all ;)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10836 on: October 15, 2015, 02:37:11 PM »
Itsu or anyone
Do you know what this R26 resistance is for? Won't mess with the 24V supply to the primaries?

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10837 on: October 15, 2015, 02:52:32 PM »
Itsu or anyone
Do you know what this R26 resistance is for? Won't mess with the 24V supply to the primaries?
The BEMF from yoke is charging capacitor C15 over diodes VD6/VD7 and the resistor R26 is just dumping charge. That is conventional part of inverters(no energy recovery). Also the R26 should be 0.5W or more as there is quite power going to discharge.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10838 on: October 15, 2015, 03:08:31 PM »
The BEMF from yoke is charging capacitor C15 over diodes VD6/VD7 and the resistor R26 is just dumping charge. That is conventional part of inverters(no energy recovery). Also the R26 should be 0.5W or more as there is quite power going to discharge.

Thanks T1000. Never seen this before :)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10839 on: October 15, 2015, 04:06:59 PM »
   Ok, so I've taken my Kacher circuit's running frequency for a ride, from it's starting point of 500khz, up to 3.3Mhz. And, now I've brought it's frequency down again to be the same as the self resonant frequency of my grenade's output coil is at, which is 1.81Mhz. 
  I'm now seeing the 20w 220v microwave bulb, and another small 10w 120v incandescent bulbs both lit up (glowing), as well. These bulbs are connected to both the induction circuit, as well as at the grenade output coil. Also the HF stinging, and small 1-2mm streamers felt at ALL the coils ends.  Have not yet reached the 3mm streamer I had at one time. But, the HV sparks are strong enough to make me toss a bulb across the table. 
  The Kacher circuit can now light a CFL bulb near to 15 inches away from the antenna coil. And light a 4 foot florescent tube almost two feet away. So far,  soooooo good.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10840 on: October 15, 2015, 04:50:05 PM »
Sounds good Nick!


All,

question about the DC2DC converter (24V to 130V) as in the red box, see below.

I have found a suitable transformer (SPI 804-2007-35), i think, and hooked it up, but the output voltage was way to high (600V pp).
Measuring the input from the both IRF540 MOSFET drains (see yellow / blue lines in the diagram), shows
a square wave signal, but at about 74V!!, see screenshot.

Input into the circuit is 24V from 2 batteries in series.


Why do i have 74V square wave signal on the drains?  How to get it back to the required 24V? 


Thanks,  regards Itsu


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10841 on: October 15, 2015, 05:06:54 PM »
  Itsu: You said,
  "Why do i have 74V square wave signal on the drains?  How to get it back to the required 24V?"

   How about placing a pot on your 24v input, or on the gate to see if it will trim down the voltage?

  That DC to DC step up circuit can be made using a second Mazilli circuit, 24v input to it also, (as in my case), and then adjust to the needed output by using another yoke core, wound up for the right output voltage?  Or not?  I still have my 12v yoke still wound up around.  Just a matter of adding a few more turns to the secondary to bring it to 130v output,
 
   Are there not no commercially made DC to DC step up boards that will work? Or that can be made to work as needed.
   

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10842 on: October 15, 2015, 05:20:26 PM »

Hi Nick,

yes, that 24V can be made in severall ways, but i just wonder why following that diagram i have 74V (well thats including ringing, so really about 50V) on the drains when i input only 24V dc.

I expected to see a square wave signal of about 24V (with some ringing) to input into my transformer.

Regards Itsu

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10843 on: October 15, 2015, 05:37:55 PM »
  There are several commercially made circuits that can be adapted by winding some more turns onto their output coil, to provide for the 130v output. Such as something like this?  Might be overkill, but there are some very cheap units that can be adapted, as well.   I always look for the easy approach, although it doesn't always work...
  http://www.ebay.com/itm/600W-DC-DC-Step-Up-10-60V-to-12-80V-Converter-Boost-Charger-Module-/301753530586?hash=item4641e978da
 
 

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10844 on: October 15, 2015, 06:38:19 PM »


Why do i have 74V square wave signal on the drains?  How to get it back to the required 24V? 


Thanks,  regards Itsu

Something to do with R27 maybe? Try disconnecting it.

Regards
Hoppy