Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717985 times)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10425 on: September 25, 2015, 10:23:38 AM »
    Let me see if I understand:
    So, first, we need to find the best resonant frequency or peak using a signal generator, of the grenade's output coil.
  Yes, I have access to a SG, but it's not mine, although I can borrow it, but it has no probes. Can any of my scope probes work on the signal generator? I have a probe with twin crock clips, also.
  Then second, the Kacher needs to run at the same frequency as the best grenade resonant frequency (but not the normal running frequency), of the 168 turns coil. So that the Kacher's HV signal will activate and trigger the grenade's output coil at it's favorite sweet spot. This is what had me confused. I get it now.
   And third, the Kacher to grenade/inductor coil frequency ratio needs to be something like 100:1, 50:1, or so. Which for my set up would be the Kacher running at 2.4Mhz, and induction/coil/3turns coil running at 24Khz, or so.  Correct?

  I'm trying to understand what has to happen, and how it has to be done. So, John won't get on my case about not knowing what to do before hand, even though it's true.
First, your grenade coil is the receiver and the wire length defines the frequency. No LC resonance calculations or adjustments in that place as Ruslan insisted all the time. The natural frequency of the transmission line should be looked at.

Second, the Tesla coil is the transmitter coupled over capacitance between top load ("antenna") and inductor on grenade coil. This is where things are interesting as it has to be tuned by wavelength of grenade coil. Ruslan suggested 1/4rd or 1/3rd harmonics. The most important thing there is the Tesla coil is switched on only for very brief period of time for making spikes wih resonant oscilation inside just like he had with nanosecond generator in first versions.

And the third, the series LC resonance on yoke have to be resonant harmonics of grenade coil and Tesla coil. To stay in kilohertz range Ruslan had chosen 1/50th 1/60th or 1/100th frequency. The Tesla coil is enabled and disabled on top of sine wave peaks for spikes with small deviance in tuning for finding best effect.

When you have exactly what Ruslan was saying more details can be looked at..

Cheers!

Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10426 on: September 25, 2015, 10:45:00 AM »
T-1000,

If you get a moment to do a little more research, see if you can find some material that may explain in radio terms what happens when you modulate a high frequency signal on top of a low frequency carrier wave.  This is essentially what we have with the Ruslan device, but I expect this to behave differently than the common way it does when you have a low frequency signal riding on top of a high frequency carrier wave.  I would like to know what that difference is.  It may explain a lot about how this device needs to be properly tuned.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10427 on: September 25, 2015, 10:48:48 AM »
T-1000,

If you get a moment to do a little more research, see if you can find some material that may explain in radio terms what happens when you modulate a high frequency signal on top of a low frequency carrier wave.  This is essentially what we have with the Ruslan device, but I expect this to behave differently than the common way it does when you have a low frequency signal riding on top of a high frequency carrier wave.  I would like to know what that difference is.  It may explain a lot about how this device needs to be properly tuned.
http://www.bibliotecapleyades.net/tesla/esp_tesla_20.htm

"...it became apparent that the fireballs resulted form the interaction of two frequencies, a stray higher frequency wave imposed on the lower frequency oscillations of the main circuit.... This condition acts as a trigger which may cause the total energy of the powerful longer wave to be discharged in a infinitesimally small interval of time and the proportionately tremendously great rate of energy movement which cannot confine itself to the metal circuit and is released into surrounding space with inconceivable violence. "

I think this is exactly the same event what N. Tesla described 100 years ago.. ;)


Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10428 on: September 25, 2015, 01:43:01 PM »
First, your grenade coil is the receiver and the wire length defines the frequency. No LC resonance calculations or adjustments in that place as Ruslan insisted all the time. The natural frequency of the transmission line should be looked at.

Second, the Tesla coil is the transmitter coupled over capacitance between top load ("antenna") and inductor on grenade coil. This is where things are interesting as it has to be tuned by wavelength of grenade coil. Ruslan suggested 1/4rd or 1/3rd harmonics. The most important thing there is the Tesla coil is switched on only for very brief period of time for making spikes wih resonant oscilation inside just like he had with nanosecond generator in first versions.

And the third, the series LC resonance on yoke have to be resonant harmonics of grenade coil and Tesla coil. To stay in kilohertz range Ruslan had chosen 1/50th 1/60th or 1/100th frequency. The Tesla coil is enabled and disabled on top of sine wave peaks for spikes with small deviance in tuning for finding best effect.

When you have exactly what Ruslan was saying more details can be looked at..

Cheers!

Thanks. I understand from previous posts that the natural frequency of the grenade coil needs to be found with the earth wire attached and inductor coil (Tesla Bifilar) wound over the grenade coil. If this is the case where should the frequency generator be attached and should the inductor be loaded and if so with what, when the frequency measurement is taken? I believe Nick is working to the TOPruslan FEG 2014 schematic redrawn by Ibrahim@cicek. This shows a 347.5 metre grenade coil winding length and an 18.75 metre main ground wire for 34.15KHz / 1.736MHz working.

DA1

  • Newbie
  • *
  • Posts: 29
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10429 on: September 25, 2015, 02:25:50 PM »
 Hi NickZ   @ All  สวัสดี NickZ และ ทุกๆท่าน

I look forward to circuit
  With the device
 ผมส่งวงจรมาให้ดู  พร้อมตำแหน่งอุปกรณ์

da1

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10430 on: September 25, 2015, 04:54:38 PM »
 
  The new red WIMA 0.47uf tuning capacitor on the 3 turns coil is 4 times the size of the previous yellow 275v 0.47uf capacitor that was on there before, (image below). So, I'm looking for those big angry sparks, when shorting it out. But, I'll need to remove some turns on my Kacher, first, as its frequency is now just a bit too high and the 1mm streamers are weak, at 2.5Mhz.
I'll probably need to go to down to about 2.4Mhz on my Kacher's secondary coil frequency, to see if there is any improvement there.


You may need to up the Kacher primary voltage to get the angry sparks.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10431 on: September 25, 2015, 05:54:39 PM »
    Guys:
   Here's an Akula video, explaining the tuning relationship between the various circuits on his 2nd video device, along with the showing the right schematic, (his schematic), of the same device.
    Seams like what both Itsu and T-1000 have mentioned is right. Concerning the procedure to go about tuning the various circuit.
   I wish that I could understand the video, as it looks very important.  This is where our Russian speaking members can help.
   It would be good if MenofFather was still hanging around here. Maybe he'll also take another whack at it this device. 
  I didn't mention GeoFusion, as he may be too involved with hydrogen and cars, to keep going on this. 
  Come on,  Geo... quit dragging your butt...
 
   I'm also seeing very similar wave forms, as the ones Akula is showing in the video. And my scope is also showing me just where on each coil the amplitude output is highest. By moving the probe just along the coil turns. This method can be used to further tune each coil to it's best output, and further re-adjusted using tuning caps.

   https://www.youtube.com/watch?v=fp3sed_eli0

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10432 on: September 25, 2015, 10:54:34 PM »
This is the video Ruslan was saying- "don't do it this way" -no need to do it this way  :) 

In brief, what Acula says is : first you have to find the resonant frequency of your grounded coil. The type of cable used has small effect on this frequency too (he was using previously Litz wire and his resonant frequency was lower (by 100KHz)  His grounded resonant point was around 5MHz which is too far to use it. So he was looking for lower harmonic and he decided to go with 1.8MHz . So he must get Tesla to work on this frequency and also tune the coil/Capacitor  for this frequency (9:50)
Than, he tunes the  LF harmonic to his  LC circuit  (11:25)  17-32 KHz -your choice (he used 32KHz)

Important moment is to hammer our coil/capacitor (atoms in our wire) with shap positive pulses. That's why he has the inductor between the Tesla and Antenna. The induction sharpens he front face of the amplitude resulting in ns hammer impulse  (  :)  ) 

That's roughly all ;)  Good luck with that.


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10433 on: September 26, 2015, 01:20:42 AM »
The type of cable used has small effect on this frequency too (he was using previously Litz wire and his resonant frequency was lower (by 100KHz)
Yes, the Litz cable does not affect the self resonant frequency of a coil much ...BUT it does affect the Q of the coil a lot.
The cable insulation and turn spacing affect the coil's self resonant frequency very much.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10434 on: September 26, 2015, 09:29:45 AM »
Your main mistake is the searching for HOW IS IT DONE. You must understand WHY IT IS DONE THAT WAY.
The sweet spot need careful adjustment and every circuit is different. You cannot replicate something you don't understand how to tune and WHY. Of course I'm talking theoretically.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10435 on: September 26, 2015, 11:06:02 AM »
Hi guys
I'd like please to rectify the signal out of a Kacher's secondary. The freq will be about 2MHz but i can't estimate the current peaks. I look that the diodes SF38      (http://www.farnell.com/datasheets/1697469.pdf)   are 600V at 3A max I(AV). With a bunch of them in series i am ok in respect with voltage. Do you think that 3A is enough for this task? What about the temperature? Are they gonna handle this? Do you have something cheap and good to suggest?
Thanks
Jeg

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10436 on: September 26, 2015, 01:52:20 PM »
Your main mistake is the searching for HOW IS IT DONE. You must understand WHY IT IS DONE THAT WAY.
The sweet spot need careful adjustment and every circuit is different. You cannot replicate something you don't understand how to tune and WHY. Of course I'm talking theoretically.

Agreed. Are you replicating the device?

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10437 on: September 26, 2015, 02:37:38 PM »
Agreed. Are you replicating the device?
No, not yet. First I'm building my own devices and learn.I will return later to let you replicate Akula-like devices.Or Kapanadze -like or whatever - IF I would learned HOW to use the principle.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10438 on: September 26, 2015, 02:50:17 PM »
Forrest, Hoppy   that's exactly what I mean.  As I said before, I put my Ruslan's replication  on hold and do small experiments with radiant charging , experiments with cap/coils, effect of grounding on the system etc. 

With respect to what Acula says in that movie the most important element is an "inductor" between the Tesla and it's Antenna to get sharp face pulse (He says his pulse shoots over 30KV)  So, can you replicate this? Actually, is it even possible to sharp the front face of the sinus wave by inductor??

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10439 on: September 26, 2015, 03:38:10 PM »
  The tuning principle and proper turning procedure have already been stated, and shown on the Akula video that I just posted the link to. If you have a signal generator, scope, etz... 
  Ruslan has his own way of obtaining the same results. If you understand Russian you can do it his way, or Akula's way.

  If you don't have a signal generator, then you, like me, will also have to find your own way to do this. Which can take forever, and is a very slow approach.
  If you can borrow a signal generator, to see what the frequency is of the grenade's output coil, at it's highest resonant peak, you then can have a starting point. Which is what I may have to do, also.

  Here below is the running frequency readings of my 168 turns coil, connected to the circuit, but not using the Kacher crt, as it is  off.  And also the readings of the frequency at the 0.47uf WIMA 1600v tuning capacitor, (second image).
  The scope settings are the same for both of the above readings taken. Which are also shown in the single pic of the scope setting image, below, (third image). And both readings are  using only channel 2 of my 100x probe.
  I see 2 sections at the .1ms setting, for the 168 turns grenade coil.
  I see 7.6 sections at the same .1ms setting, at the 0.47uf capacitor. 
  The device is also earth grounded at the the input side of the 168t coil, and the Kacher transistor's emitter is also grounded to earth ground.

 
« Last Edit: September 26, 2015, 06:19:29 PM by NickZ »