Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718540 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10395 on: September 22, 2015, 06:45:20 PM »
 
  The power of an implosive vortex, is where the secret lies. It's a natural process, and with no need to burn anything up, which will produce poison in the near by ambient.
  These types of devices are vortex producers, especially at the yoke core/coils, but Tesla coils, Exciters, and Kacher circuit are also all vortex devices. They can also be Aether harvesting devices, if we just knew how to do it.


 ??? Is that also a fact Nick? I've seen nothing scientifically verified regarding the mode of operation of either Kapanadze's Akula's or Ruslan's devices, just speculation.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10396 on: September 22, 2015, 06:55:13 PM »
There is always headache for the most about energy source.
One thing to mention after recent conversation with akula(I still keep in touch with him) - all his devices ran out after some time and he have access to radiology labs in where after measurements he definately stated about using material as fuel... All he did -  just slowed down nuclear decay so instead of Yoke device running for 15 minutes on full power you get LED flashlight running for much longer period.


That is disappointing if verified. :(

I'm already running LED lights in my home on solar and battery, so I would not need a harmful nuclear reactor to run them!  ::)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10397 on: September 22, 2015, 07:14:48 PM »
That is disappointing if verified. :(

I'm already running LED lights in my home on solar and battery, so I would not need a harmful nuclear reactor to run them!  ::)
Not so disappointing for nuclear physics as radioactive rare material would lose its value in abundance of easy to access materials for the reactors. Poor countries still could use that for power grids. Another thing with common materials is, there would be no nuclear waste and the resulted products from reactions could be recycled for something else. It is good intermediate step from total waste towards clean energy conversion to usable forms.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10398 on: September 22, 2015, 07:28:43 PM »
Not so disappointing for nuclear physics as radioactive rare material would lose its value in abundance of easy to access materials for the reactors. Poor countries still could use that for power grids. Another thing with common materials is, there would be no nuclear waste and the resulted products from reactions could be recycled for something else. It is good intermediate step from total waste towards clean energy conversion to usable forms.

Yes, that's one way of looking at it in a positive light. However, its hard to believe that the poor end user, still tied to a grid power distribution network, would enjoy any real financial reduction in energy usage, even if the fuel was less rare and safer to dispose of or recycled.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10399 on: September 22, 2015, 07:48:43 PM »
  "Is that also a fact Nick? I've seen nothing scientifically verified regarding the mode of operation of either Kapanadze's Akula's or Ruslan's devices, just speculation.

    That's correct, You have not.  Nor has it been dis-proven, one way or the other.
Which is what I'm up to... to prove this point, or find another means to that end.

   Would you rather believe the "fact" that everything exists due to a one time "Big Bang", as is the believe-able scientific explanation currently being taught in schools to this day, to your kids.  Scientifically verified???
Empirically proven, and supported by facts, which can be replicated? I don't think so.
   The other side of the coil?  Give it time, it will all come out in the wash.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10400 on: September 22, 2015, 08:37:00 PM »
  Itsu:
  Thanks for the link to your previous post.  Very interesting...

   The question remains: Is the Kacher HV signal suppose to sync with the grenade/induction coil frequency, or with the higher frequency at the 0.47uf cap, on same 3 turns coil/induction resonator coil circuit. Does anyone know for sure?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10401 on: September 22, 2015, 08:39:46 PM »
  "Is that also a fact Nick? I've seen nothing scientifically verified regarding the mode of operation of either Kapanadze's Akula's or Ruslan's devices, just speculation.

   Would you rather believe the "fact" that everything exists due to a one time "Big Bang", as is the believe-able scientific explanation currently being taught in schools to this day, to your kids.  Scientifically verified???
Empirically proven, and supported by facts, which can be replicated? I don't think so.
   The other side of the coil?  Give it time, it will all come out in the wash.

That's a bad example Nick because its just a theory among others.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10402 on: September 22, 2015, 09:16:40 PM »
  And so is NMR as it relates to these particular  devices. Where are Akula's lab result that lead him to say such things.
Or Ruslan's for that matter.  As this is no small detail. Although, that is not my concern. As I doubt that most tests that have been made on these particular HV, HF device, using Geiger counters, etz,  that will not be miss interpreted by these same radiant HV discharges.

  To me this is all just another cover up, to hide the "fact" that such devices do exist, and are working as shown.
Energy from the void, is not what the scientists are looking for, as they have no way to prove the source. And as this energy source is not recognized, it therefor just can't exist.  Or can it?
   

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10403 on: September 22, 2015, 09:27:50 PM »
  Itsu:
  Thanks for the link to your previous post.  Very interesting...

   The question remains: Is the Kacher HV signal suppose to sync with the grenade/induction coil frequency, or with the higher frequency at the 0.47uf cap, on same 3 turns coil/induction resonator coil circuit. Does anyone know for sure?


Hmmm, i don't know if that question is correct.

To my knowledge, the Kacher should be in resonance with the grenade/ground coil on say 1.5Mhz, the induction (or bifilar) coil around the grenade should be
in resonance with the 0.47uF series cap on the lower frequency (15KHz) in a 1:100 relationship (or a 1:60 or 1:50 relationship).

So first you need to find the resonance point of the grenade/ground coil,
then set the kacher frequency according to this grenade/ground coil resonance point,
then use a 1:100, or 1:60, or 1:50 relationship with this found resonance frequency and set the induction coil (bifilar coil) resonance to that lower frequency

Another requirement is that the kacher is not constant on, but is being pulsed on / off in the same lower frequency (15Khz or..) so that the kacher
is only active for a short while on top of a resonance peak of the induction coil (bifilar coil).

Please correct me if i am wrong.


Regards itsu




Dog-One

  • Hero Member
  • *****
  • Posts: 1019
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10404 on: September 23, 2015, 03:30:03 AM »
Please correct me if i am wrong.

That matches my understanding Itsu.  Hopefully it is correct.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10405 on: September 23, 2015, 10:18:56 AM »
That matches my understanding Itsu.  Hopefully it is correct.

I found the statement below in some conference notes prepared I think by T1000.

"Also, the wire length of Tesla coil must be tuned to match resonant frequency of grenade coil wire length which is wavelength. When frequency matches with grenade coil the 25W bulb connected directly on grenade coil should start lighting up. You need to get the best resonant frequency of Tesla coil decided by wire length of grenade coil to have maximum effect."

I read this as the frequency of the Tesla bifilar coil needing to be tuned to the resonant frequency of the grenade coil. However, I'm not clear on exactly how this should be best achieved. I think what would help Nick and others who are in the process of building, is a step by step guide through the whole process giving the correct order of coil connection and tuning steps. That's assuming that somebody here is very clear on this and prepared to assist.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10406 on: September 23, 2015, 10:24:10 AM »
I read this as the frequency of the Tesla bifilar coil needing to be tuned to the resonant frequency of the grenade coil. However, I'm not clear on exactly how this should be best achieved.
If you treat grenade coil as transmission line connected over capacitor in series (the top load of Tesla coil hanging on top of inductor up to the half of grenade coil) the bifilar is your wave transmission line in that case. Should be not too hard to figure out by wire lengths and using RF theory as background knowledge. That implies you were building RF circuits or at least have good understanding in it. ;)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10407 on: September 23, 2015, 10:52:06 AM »
If you treat grenade coil as transmission line connected over capacitor in series (the top load of Tesla coil hanging on top of inductor up to the half of grenade coil) the bifilar is your wave transmission line in that case. Should be not too hard to figure out by wire lengths and using RF theory as background knowledge. That implies you were building RF circuits or at least have good understanding in it. ;)

Thanks for replying but I'm neither competent enough in RF theory to work this through, or in the process of re-building this device, thus my question and suggestion that would help others who are building and lack the background knowledge, like Nick.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10408 on: September 23, 2015, 12:37:07 PM »
Thanks for replying but I'm neither competent enough in RF theory to work this through, or in the process of re-building this device, thus my question and suggestion that would help others who are building and lack the background knowledge, like Nick.
It is never too late for learning. In general we are focusing on maximum energy transmission on the end of transmission line which falls into 1/4th or 1/2th wave length for sine wave peaks.
Also there is good background read in http://www.bibliotecapleyades.net/tesla/esp_tesla_51.htm if you are interested in theory.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #10409 on: September 23, 2015, 02:37:02 PM »
  Looks like no one is too sure of what to do exactly, or just how to go about it.
  But, it's not lack of knowledge, as it is a lack of proper instruction.
 
   Personally I don't think that the Kacher circuit should resonate at the same frequency as the 168 turns grenade output coil, as the two are running at totally different frequencies. The 168 coil does not run in the Mhz range, like the Kacher does, nor do I think that it should be, either.

  I'll do some more testing of the frequencies of both of the grenade coils, and compare them to the Kacher frequency to see how it looks.
  I've got my new set of scope probes, and the new WIMA tuning caps, now.  So, I'll install the caps and re-tune things, and report back.