Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719021 times)

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8250 on: April 06, 2015, 05:35:43 PM »
You won't find anything better than the 1n5408 at Radio Shack. But you can get some cheap bridge rectifiers on EBay that will probably be suitable.
There are lots to choose from. For example
http://www.ebay.com/itm/like/181694422589?lpid=82&chn=ps

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8251 on: April 07, 2015, 12:06:23 AM »
Nickz,
I am using the UF4007 per someones advice.  I dont really think they are heavy enough to handle very much of a load but its a start for me. I just figured we would need high speed diode because khz frequency. I have made a change in my connection of the s1 in the schematic because the way it was sending a higher voltage than logic level down to the Tesla driver board and damaged a protection diode. also it did not invert the signal the way it was, now it does. I can have pulse on top or bottom depending on switch position. I think this will help aid in getting the pulse on top of the yoke signal so many windings it is easy to reverse the polarity on one. I agree scope is a must no way around it. I noticed my Tesla ringing frequency is 1.25 Mhz. When i reduce the number of turns on the top load it brings it to around 1.6 Mhz. Which is much closer to where my grenade resonance tested about 1.7 Mhz. I need to order a Power supply for testing i think i will get the 0-30vdc 10 amp. adjustable protection. 68 dollars on eBay.  That will be enough power right? I have not powered my yoke fets more than a few seconds so far because i am scared to death something will blow sky high. since i only have heavy duty 18volt battery and fuse, with no caps yet. So far for me i can power up the tesla circuit and the output will slowly rise to 230 or so unloaded then i can blink a light. no power to yoke yet only gate signals working good. i can post signal pictures if anyone is interested.

charly2

  • Newbie
  • *
  • Posts: 23
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8252 on: April 07, 2015, 03:24:37 PM »
... aking.21 has talked to Tariel a lot,Tariel told him theres a special component he makes or modifies
that makes this device work only he knows how to make it,this is why people will fail if they try to replicate it.
As I have said many times it is not a Tesla invention nor related to anything Tesla invented,Tariel says its a
Tesla invention to send people on a wild goose chase,I believe its an accidental discovery by Tariel.
The term resonator is used by Tariel to fake you out,its an active component,in every device its hidden
except in the aquarium 2 device.As you have pointed out it is very hard to put on a demo in front of a large
group of people and fake them all out,as some will be skeptical and look real hard for fraud.
I don't believe its impossible to replicate, but its very,very hard to figure out enough correct information to replicate.

Hi cheappower and all, I think Tariel was covering the real principle behind that spark gap as a smoke curtain.
Why I say that?, well,
What could be the reason to use a very heavy gauge (or a copper tubing) in the outside of the coil insulated by a big space from the rest of the coils?
Is is hot to touch?

I guess he his using the opposite principle, he is inducing a huge current with very very low volts in that thick coil with very low resistance.

Current, resistance and voltage (and windings of course) work hand by hand in a coil in order to induce a magnetic field. But what really is important in the magnetic field creation is current and number of turns in the coil and its geometry. So the lower resistance in the conductor is better in order to get more turns and work with lower volts.
Just imagine that big gauge coil in the outside being feed by lets say 150 or more amps at 0.5 or less volts, the product of I x V will be relatively low but with a strong magnetic field. Something like the thick loop in the Barbosa & Leal device.
Then the inner coil (secondary for me) with more windings is induced by the strong alternating magnetic field.

Do you think is it possible this way?. Someone has tried this way?
Not my intention to mislead or disrupt the main concept of this topic.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8253 on: April 07, 2015, 05:17:36 PM »
  Bat1Robin2:
  I think that it's better to invest in two 12v 7ah batteries, instead of a grid powered power supply, like Ruslan is using, even though he has a power supply.
   I bought a new 12v 7ah battery yesterday, as the 12v car battery I was using seems to have sulfated, or has a bad cell, and didn't sustain the voltage.
  The full bridge rectifier that Tinsel posted a link to generally won't work well, and will heat up quickly, as they are made for 50 or 50hz, and can't handle higher frequency well. And is why those type of rectifiers are not being used anymore by Akula, or Ruslan.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8254 on: April 07, 2015, 05:41:50 PM »
  Bat1Robin2:
  I think that it's better to invest in two 12v 7ah batteries, instead of a grid powered power supply, like Ruslan is using, even though he has a power supply.
   I bought a new 12v 7ah battery yesterday, as the 12v car battery I was using seems to have sulfated, or has a bad cell, and didn't sustain the voltage.
  The full bridge rectifier that Tinsel posted a link to generally won't work well, and will heat up quickly, as they are made for 50 or 50hz, and can't handle higher frequency well. And is why those type of rectifiers are not being used anymore by Akula, or Ruslan.

Nick,

You will quickly polax a 7A/hr SLAB with your Mazilli running 100W bulbs.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8255 on: April 07, 2015, 06:19:43 PM »
    Hoppy:
   Good to know, but I can't run the device long in any case, due to the fet issue. I do use the 12v 10amp battery charger sometimes as well, just for testing purposes.  Although it takes no time for the Mazilli to eat up any battery's charge, at 300 to 600 watt or higher draw. But, the idea is to either make it more efficient to run off of solar power, or, ideally to run itself.
 
   Even the induction cookers circuitry like Igor Moroz uses, can output 2000w or more watts to his bulbs, while drawing only 500w.
Meaning that it may be possible to even use a solar array of 500w, and obtain and output of 2000 through the circuit, and/or  also feed some of that power back to the grid.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8256 on: April 07, 2015, 06:45:21 PM »
.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8257 on: April 07, 2015, 06:47:01 PM »
hey nickz,
What capacitor are you using for C15 on the schematic. The capacitor near the Yoke drive FET.  The schematic just says 1 ufd. On some of the videos it looks like a disk ceramic maybe. Can you specify what you have there for capacitors. (type, voltage and size & connections)? (non polarized i assume?)

I have a polarized  1ufd electrolytic at 50 volt or so.  I do not feel like that is right. It looks to me it is acting more a a spike absorber than anything else. Any comments would be helpful.

Thanks

squire42

  • Newbie
  • *
  • Posts: 2
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8258 on: April 07, 2015, 06:53:44 PM »
Hello to all fellow experimenters, been watching this thread for quite some time now and also trying to relpicate Akula/Ruslan type devices with much interest.  As I am pretty ignorant of most things, this is no different but came across two patents that may be related to this field.

One is Philo. Farnsworth - Electron multiplier

http://www.radiant-powered.com/downloads/patents/US2221473_philo_farnsworth.pdf

Second is Lelsie Kent Wanlass - Parametric Device

http://www.radiant-powered.com/downloads/patents/parametrics.pdf

Some similarities between these are mixing of two frequencies.  With Philo's seems an electrostatic field vibrating at a high rate mixed with a lower frequency is the principle there.  With Lelsie Kent's device, seems harmonics with a fundamental frequency mixed with a double frequency. (child on a swing pumping at both maximum peaks).  Looking up parametric resonance on Wikipedia, seems to have some effects that could be interesting to harness. 

Here is a quick video showing the kacher having a good effect while mixing with the yoke.  Higher frequency super imposed onto a lower frequency.  No COP >1 but the effects are very interesting and needs more study.

https://youtu.be/4oEYvhonWxo

Parametric definition according to Google:

Relating to or denoting a process in which amplification or frequency conversion is obtained using a device modulated by a pumping frequency, which enables power to be transferred from the pumping frequency to the signal.

Quote from Parametric Device Patent :

When properly constructed such parametric circuits are essentially self starting oscillators whose oscillations build up to a certain amplitude and then remain constant at that amplitude.

To all the experimenters and back shed tinkers, your work is important and inspirational  to many, breaking new ground takes hard work and 'out-side the box' thinking.  Thank you for taking the time to share your adventures!

Sorry if this has been posted already and may be a step backwards for some but thank you for taking the time to read this.  Good day to all!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8259 on: April 07, 2015, 07:00:30 PM »
  Well, I don't know if Igor's set up can be called an overunity device, but maybe.
  It has not been a self runner as yet though, however the idea was always to loop it.
  He bought a new induction cooker, after the first one burnt out.
  The induction cooker circuitry may incorporate some type of pulse modulator or controller, as well.
As it's pretty involved, but relatively small in size. And it needs no big Tesla coils, or big grenade coils to work.
  Comparing the magnetic induction circuits output to normal grid output, may not be the best way to look at it.
  But, it would be a very useful device if self running were obtained. So far, no cigar...

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8260 on: April 07, 2015, 07:43:32 PM »
  Well, I don't know if Igor's set up can be called an overunity device, but maybe.
 

It must be OU big time if as you say it can output 2000w or more watts to his bulbs, while drawing only 500w!!  :o

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8261 on: April 07, 2015, 08:53:21 PM »
Hi Squire42. Thanks for posting those patents, and you seem to be making some
good progress with your setup. Keep investigating and you never know what
you might turn up.
All the best...

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8262 on: April 07, 2015, 09:14:30 PM »

   Geo: What is Akula adjusting in that last Akula video that you posted a few days ago, to obtain resonance? Any idea?


  Nick,

https://www.youtube.com/watch?v=1Rr-qTvTrdU

Akula was simply Adjusting the Frequency of the Tesla coil Circuit until he reaches resonance with the load.
the grounds are connected to one. both Tesla coil transmitter and Receiver stepdown/converter.
raising ferquency really doesn't effect the input.

I have tried this with my Flyback test with the ground and this is real :) with AKula's circuit., have to resonate with the output coil or capacitor
which is connected to load. In my case I had to fine tune 2 the Spark gaps to able to get this but in low power output.
https://www.youtube.com/watch?v=n3hU5CCBt5k

But for Akula device , as we know, This requires a Circuit board with with atleast a TL494 or different ,  that only consumes less then (saying something) 20-50 watts power or less as example.
and only 12Vdc input and having the tesla coil giving an output some 25 -50 KV radiant is an example.
make a circuit that uses so less and manages to give huge output in KV range and to ground.

btw the 3 winding part on the yoke to cap in series to coil, that must be pulsed and through a TL494 or greater, and keep tuning
untill you reach resonance with the capacitor to obtain the power lvls.
Akula used that in his first device remember? only that, but he injected 311+dc though.
There is so much to talk, I will need time.
I recently got so much info that starts to connect all puzzles together but to have time to finish it is the thing but will get back. ;)
 
 Guyz
This vid show's lighting coming from ground and going up, THIS is the energy that we need to harness :) and what these tech do!
It's HF HV RADIANT. and find a way to constantly pulse it to call it out that lighting  and harnessing it for the use.

Btw it's in extra slow mo to able to see them travel. :)
this is the idea to keep in mind while working with these technologies, admire nature :)

https://www.youtube.com/watch?v=U8mSwCwZO1o&feature=youtu.be

my mazilli flyback ground dependent device, uses 12Vdc and is able to give maybe 2KV-3KV only.
Imagine that. what a difference between circuit I have there and what akula/ ruslan has.  :)
It's how the circuits are build for sure, to able to get these power outputs. the right caps are needed too. :)

https://www.youtube.com/watch?v=1Rr-qTvTrdU


Srry guyz my job has me busy these very days  :-\ , crazy to head back on bench and do the uploading
 that would take few hours.

Keep the minds working together guyz.

Cheerz~





TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8263 on: April 07, 2015, 09:52:21 PM »
Sigh. Akula's pretend-Tesla Coils crack me up. He had better hope he actually doesn't get one running in true VRSWR mode there in his cluttered workbench. He's demonstrating transformer effect, nothing else, and all the big terminals are just for show.

Here's what a real SS-SG hybrid TC looks like, running as a true Tesla Coil in VRSWR mode, and not running on the mains power either, but on 2 ea. 12 V, 5 A-H SLA batteries driving a correctly configured and constructed Mazilli-Royer ZVS oscillator using 2 IRFP260n mosfets. What, no light bulbs? This thing would blow out Akula's bulbs in a millisecond. (The white marks on the ruler are _inches_ not centimeters. Feel free to calculate the voltage output of this coil using your favorite spark gap tables, and be sure to use the right tables, since I am not using a breakout point.)

http://www.youtube.com/watch?v=aIZClhoU2Xk

You want to substitute 1 amp UF4007 diodes for 3-amp 1n5408s in your bridge? That's all up to you,  of course. But I think it's a darn shame that you are wasting your talents, time and money providing entertainment for Akula and his ilk, instead of making real progress in understanding your systems.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8264 on: April 07, 2015, 10:10:51 PM »
@TinselKoala:
1)  How much power and how high a voltage you can get into a tesla coil of course isn't necessarily at all what
     Akula was trying to achieve in his over unity experiments.
2)  You have no evidence that Akula has ever made a fake demonstration.
3)  Akula actually has built some tesla coils that put your little low power tesla coil to shame. ;)
     See an example of some tesla coils that Akula built just for fun here:
     http://www.youtube.com/watch?v=4d9OX7ELUpU
     Those streamers will be measured in feet or meters, not inches.  ;D

All the best...